Reviews
For Wiring processing
Purchased for Wiring processing. No problem. View detail
It's well made, but....
Installed on High ace3 late model, WideMiddle roof car.
It looks and feels solid, but I can't get the Hook to work.
I had no choice but to use Tie Down's Sub belt.
View detail
Fits: Others TOYOTA 200 Series High ace
Leather suit is heavy
I am doing Road race and may open Rear hatch and put on Leather suit.
In my Leather suit, the Hatch comes down, so I added this Stopper to prevent this.
View detail
Preliminary Fuse
When I changed to 6V MONKEY/GORILLA Main Harness of Other Brand Product, Fuse box was attached, but it was Mini Flat Type Fuse, and I shorted it at the time of power supply branching, so I purchased 5 boxes, which is a lot for spare parts.
For some reason, the selling price seems to vary with the number of A's.
View detail
spare
I replaced the 6V MONKEY/GORILLA Main Harness with another company's 6V MONKEY/GORILLA Main Harness and shorted it when I reconnected the electrical system, so I bought this as a spare.
Quantity:1 Set of 3pcs., I don't think I will use all of the stones, but the price is not that much, so it helped.
View detail
Cospa is imma 1 to now 2!
The flange part of the drainage drain fitting is a BALI that might cut your hand, and the aperture part of the untreated stainless steel pan is a wrinkled aperture.
Even a manufacturer of cheap sinks can be out of the box with a quality control check.
If it is to be sold as Parts, the price should be 3,000- at the most.
I would like to see a more thoughtful pricing... Dear OGUshow
View detail
Connection
Type 110, Cable branch, used for connection.
Male、FemaleQuantity:Set and a little extra in number, it was just right for a spare.
View detail
disconnection
Since the Cable came off during Connector removal, it is used to crimp the Cable to the terminal again.
We were able to use just the right number of pieces.
View detail
defective contact
It is used for reassembling due to poor contact of Cable.
I wish there were a certain number of pieces, but I don't think the cosmetics are very good.
View detail
Can be used as Repair Parts in case of damage!
[How is it used?
I found it damaged when replacing the Tail lamp on my car and purchased it for effect.
Image by Quantity:1 Set of 2pcs.
How was your experience with it?
Just insert it in the same way as the NORMAL. The replacement of the damaged one, which was unstable due to rattling, can be fixed firmly.
The shape seems to be shared by Honda and DAIHATSU vehicles.
How did it compare to other products?
I don't know because I have not compared other products.
[Points to note]
It is better to insert slowly and without force.:Plastic, so it is easily damaged.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For replacement or spare parts
Quantities for replacement and spares due to out of fuse.:I thought 1 Set of 3pcs. would be a good deal, but since it's Fuse, the cheaper one would have been fine. View detail
Used for S1000RR
I was looking for a Wiring near the Tail Lamp with Tail Lamp, but it seems that some Wiring touched each other "ping", and the Fuse flew out, so I bought it.
This may be the first time I have skipped Fuse in any way. I did some research and found that there are so-so types of Fuse in one word.
Size is Exactly.:1 Set of 3pcs., so you don't have to worry even if Fuse skips 4 more times (although it would be a problem if you skip that many times …).
I think it would be good to have it as a Stock.
View detail
Considering it as a Bullet Type Terminal, this price is ….
The Waterproof Specification is IPX3 etc. level, so it cannot withstand submersion in water, but it can withstand some heavy rain, and I think it will be no problem in places where it will not be directly exposed to rain, such as under the Seat.
However, considering it as a Bullet Type Terminal, the cost of nearly 100 yen per pair seems expensive. If they are gold-plated, I can accept it, but they are just as they are.
View detail
sq does not fit and cannot be used
The Power Out-put Cord of DAYTONA Power Unit (D-Unit+) had a stag beetle terminal, so I bought this to change it to a Round Type Terminal.
However, since the Power Cord was over 3sq, it could not be crimped with this product.
The product itself is solid and good because it is made by Emon, a reliable company.
I think I will keep it in Large because I may use it in the future.
View detail
Conditions of use apply.
It is applied diagonally over the rear wheels and pulled forward to secure the vehicle body. (Fixed assist.) Supplies.
The place to pull and Hook is limited to a certain extent (by angle and distance).
If it's a self-owned Transporter, I'm sure you can do whatever you want to counteract that.
I am using a rental car and it did not function as it should.
(Sub belt could have been used to some extent)
The Ratchet section was somewhat difficult to use.
Based on the above points, I gave the satisfaction rating 3 stars.
I gave it 3 stars for durability as it has only been used once.
View detail
Fits: Others NISSAN CaravanNV350, Others TOYOTA High ace200 series
Space would be a bit wasted.
I use it on my Narrow High Ace van. I bought the additional type for the Rear Sets because the full size motorcycle could not fit on the Rear Sets unless it was stacked diagonally.
With Rear Sets that can be shifted in front of SUPERgl, it would probably go straight in even without DirectKit.
View detail
Sounds great! I knew it "LexusOEM"
Installed on a high ace6 Diesel car.
It seems that many people change Horn of High Ace to Lexus Horn, and it has become a standard custom.
Beep." from the sound of Fern." The sound was a very resonant sound.
Incidentally, it seems that Estima and others have also adopted this nice-sounding Horn. Around that area Lexus." I feel that I am on the shoulders of the Brand called
certainly EstimaHorn." Than Lexus Horn. I think I'm more likely to buy a… It was a bit of a Small story.
Now, I personally felt that the installation SuKill was a little high.
I don't know about the other models, but for the 6 high ace, it was necessary to remove the front grill and bumper in their entirety.
In my case, I had already installed an external front lip spoiler, so I had to remove it as well.
There are quite a few Bolts and Fasteners attached to various places, so it takes time to figure out how to remove which one, which Coupler to remove, etc.
However, as I mentioned earlier, the Horn replacement for High ace is Standard Custom This is the case. Therefore, if you look up how to do it on the Net, you will always find a teacher, so refer to his/her blog.
It took me about an hour and a half to put it back together after removing the Bumper? It took me about 1.5 hours from the time I removed the Bumper to the time I put it back on.
We estimated the work to take about two hours. That went faster than I thought it would." I was under the impression that it was a task I would not want to do if I had to do it again…
View detail
It is light and easy to use, but...
It is light and easy to handle. However, when used near its load-bearing capacity, the black plastic part and the aluminum frame began to bend. Although it has not broken yet, it is recommended to use it with a margin for weight. View detail
Pressure Reduction
Seat belt eliminates pressure sensation.
The use of a seat belt over long distances can reduce the tightness of the belt.
The Seat Belt is easy to install and the safety of the Seat Belt is not much different. Installation is easy, and the safety of the seat belt is not much different.
View detail
To prevent scratches
We decided to put Protector on the car so that it would not get scratched if we bumped it in a small parking lot.
Installation is easy, as it is simply clipped onto the Door Edge and secured with Double-sided Tape.
It is good because it does not look bad and does not feel uncomfortable.
View detail