Reviews
Hook was not needed.
Used on GPZ900R. The large hooks are not suitable for motorcycles with hooks, but the large mesh of Rubber is the best choice. View detail
Might I have trouble changing the batteries?
WatchQuantity:Set is easy and quick.
When replacing the Button battery, the screw on the back cover did not loosen as expected.
After all, the battery was installed directly on the car body without replacement.
I did
There is no time deviation so far.
It is easy to use.
The old car Dax is displayed in the house so that it can be ridden from time to time.
From now on I will ride Dax125 as Main.
View detail
The fittings allow you to secure various sizes of luggage.
It is a large size Net and is larger than the CT110 HUNTER CUB's huge large cargo bed, so it is too large for a small amount of luggage. However, it is very convenient to be able to adjust it according to the size of the luggage since it comes with a joint with a hook for adjustment. If your luggage is a little too large, as shown in the photo, you can attach the hook to the end of the Net and it will be sturdy enough to carry a large amount.
The storage bag has a long Velcro tape welded to it so it can be secured to a motorcycle body. In my case, it is inside of SP Mukawa's Side bag support attached to CT110 HUNTER CUB. (Tire side) The Support is fitted to the Tire of the CT110 HUNTER CUB so that the bag does not touch the Tire. It looks as if the bag was made for this purpose.
View detail
![[Repair Parts] Grip Heater GH07 Grip](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0318/24737346_20221202163046901_TS.jpg)
fast in delivery
It arrived quickly. I'm glad I didn't have to deal with the cold. View detail
Compact Cargo Hook
It does not protrude more than the Clubba and fits better. The Net Hook should be more compact to fit in the case of the Clubba. I used the same Posh face color SpoolM8x30mm and Stainless boltM8x105mm. View detail
Buy at Dress-up
The hook is too large for a loading hook, so it is difficult to hang a belt on it, but it looks good. However, I think the price is too high for a loading hook only. View detail
Analog GPS..
I took a risk with this item as the only place to put it was on a non-magnetic metal instrument screen, and quite close to the instrumentation too. Unfortunately this does mean it does get occasional interference from magnetic fields on the bike. This isn't a big deal for me as I mainly just want to know which general direction my bike is travelling when in unfamiliar territory. If there was one thing this compass lacks, that would be a glow in the dark feature; which it doesn't have..hence it's useless when on the move at night. View detail
Loading Hook
A Loading Hook has been added for easy use of the Net to supplement the capacity of the Small TypeTank Bag. On the back side, a Loop is threaded through the Club bar.
I used the same Posh face colored Spool M8x30mm and Stainless bolt M8x120mm as the Loading Hook without any modification. I think a M8 x 25mm colored spool or a 1cm short Loading Hook would have been fine. However, in the case of the Short Hook, the inner diameter is too large to interfere with the Club bar, and a thin Hook made of gold might be better suited for this purpose.
View detail
DAYTONA Touring Net
The quality and texture information are elastic, so it is not very elastic I think it's perfect for a helmet. I think it' Configure design information to net Information Size Chart 400 mm x 400 mm Cost performance and comparable price and good product Webike packaging is always good. Delivery and packaging will arrive in a week It is a good product for people with a lot of luggage, but I recommend a helmet because you can move a little if you drive with a little View detail
![Grip Heater 115 [Grip Heater: Repair Parts]](https://img.webike-cdn.net/catalogue/images/31601/08t50hane01_01_TS.jpg)
I'm ashamed to admit...
I'm ashamed to admit that I put the Grip on before I put the Controller on, and now it's too late.
It is impossible to remove it again with reusable Level, so I had to buy a new one at Repair Parts.
The result was expensive, but the Quantity:I'm glad it's still better than buying 2 Set. (;^ω^)
View detail
Use as a cargo hook Size is also unobtrusive and fashionable dress-up!
Quantity attached to the Main pipeCover of CROSS CUB110 (JA60):Pair (for Left and Right) Remove the screws at three locations each,
I changed to License bolt to use it for Carco Hook.
The size is just right for hooking Cargo Net or Elastic band.
I am concerned that the Center cover may be damaged, but I would like to find something to protect it.
Main pipeCover Screws are available in M5 and M6.
M5 screws have a gap of about 10mm, while M6 screws have a gap of about 5mm,
NylonSpacer and NylonBush are available.
This will hold it firmly in place without any rattling.
View detail
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
Screw goes missing.
It is used with Pillion Bar.
Quality as a Holder is perfect!
It is well made and highly satisfactory.
However, the screws for adjusting the Large size may be prone to falling off.
If you don't squeeze it properly and drive with it loose, it will fall off before you know it.
Once it is lost, it is even more likely to fall off with other nut, etc. Therefore, it may be necessary to first apply Screw lock to the tip of the Bolt to prevent it from falling off.
View detail
I wanted something Small and cheap.
I was looking for a Small size.
Hook's Parts is a simple construction compared to the more expensive ones, but the price is low, so I am happy with it.
View detail
Stable
The CT110 HUNTER CUB had a Seat that was too Flat, causing the body to fall backwards during acceleration, and my back would ache if I rode it for a long time.
The backrest supports my waist, which stabilizes my body and reduces the burden on my back, and the footpeg and backrest help stabilize the car body when turning.
The construction is solid and seems to be strong enough, and it is possible to sit lightly on the backrest when standing.
As a Demerit, I can't sit deeper in Seat, so my buttocks hurt a little faster because I can't distribute my weight with my thighs.
If you are taller than 180, your legs may feel cramped.
View detail
Even a sudden rain is better than Net
It is not Completely Waterproof since it is only covered from the top, but it is better than Net even in a sudden rain. View detail
Great replacement for Convenient Hook
Installed on XForce.
Since YAMAHA's Option product costs more than 20,000 yen for the Base and Hook, I was stupidly waiting for the Other Brand Product to be released.
The price is more than double the market price if you consider it to be just a Convenient Hook, but it is bearable compared to the Option product.
To install, simply remove the Screw and replace it with the OEM Product.
A little difficulty when tightening (The short end of the Hexagonal Wrench does not fit) It is easy to the extent that we did.
There is no Large problem with the product....
I wanted to be able to hang something a little thicker.
Because you only need one Hook, (like Carabiner). I wanted the structure to be such that it would not come off even with vibration.
View detail
It's not bad, but there's no outstanding ingenuity or functional beauty.
I think this is a dead feature, although it is mentioned that it can be adjusted according to the Bottle width.
The construction of the Screw part seems to loosen easily if it is tightened frequently and repeatedly, so it cannot be used extensively.
The holder is recommended to be semi-fixed with a width that allows a 500ml bottle to fit in the limit.
If possible, I would have liked to see consideration such as a strong Spring type to make it easier to adjust the width.
Also, when installing a Short Screen on a car body or near the Grip, the Tumbler of ConvenienceCoffee, for example, must be careful because the container, which has lost its contents and become light, can easily be blown away by the driving wind, effectively littering the area.
I must say that if the Holder is not able to hold it securely until you throw it in the trash yourself, it is not a very good drink holder.
I would like to see a mechanism to keep Hold on the Bottle.
Also, if the Handlebar is installed as is, it will scratch the paint on the Handlebar, so I think it should at least come with a weather-resistant rubber plate.
After about three years of use, there has been almost no deterioration, and the product seems to be made to be resistant to rust and deterioration, so the durability aspect is promising.
View detail
Used for Motorcycle Drink holder.
I bought this to replace the drink holder I had made for my KSR2 and to install on another motorcycle. (Inner？) I ran 60km without Sponge, but Plastic bottle did not fall off and I was able to use it safely.
I don't know if all of them are compatible with Plastic bottle.:The color of the Sponge is Blue in the Site description when I purchased it, but it is Black in the current Catalogue, so naturally I received the Black color.
View detail
Super simple and can be used anywhere
I wanted one rope-like loading tool, so I bought it.
This may be a little out of the original application, but I used it for on-board bicycle use.
Hang it on Anchor inside the car and secure it so that the body of the car does not sway or move.
It is not as dependable as a vehicle mounted in a Tie Down, but since it is basically loaded sideways, even this much served the purpose well.
It is easy to handle as it can be secured simply by pulling the Rubber rope and hooking it to the fixture.
Since they don't come loose, I can concentrate on driving because there is no more rattling behind me when accelerating or decelerating.
It would be a fun alternative to a little Accent hanging in the car.
View detail