Reviews
Strong and secure
There are also mounting holes to safely secure your motorcycle. View detail
Wide range of support
Mini bike to Transporter ~ Motocross ~ On road
Wheel chock that enables a wide range of loading.
Selected by Function and Design.
Can be mounted with M8 bolts at 4 locations.
View detail
Convenient for Motorcycle parking!
I use it to park and place my Motorcycle. Even if it shakes a little, it doesn't kick. View detail
Convenient
I use it when I mount my Motorcycle in my car.
The front and rear can be fixed, so all that is needed is to fix it with Tie Down and it will not move.
It's weight, strength, and portability are perfect.
It is easy to use.
The receiving part can be variable depending on the car model, so it can be used even if the car model changes.
View detail
Not for my purposes.
I bought gsx-r1000r with High ace because I was worried about Tie Down only.
I thought it would be a little better, but it was no different than Tie Down only.
After all, it seems to be suitable for diagonal loading of Off cars.
View detail
For Version up of Cutting Board Trailer
I bought this for loading three Off cars on a common Chinese cutting board Trailer.
If you load everything in front, the Handlebar will hit the handlebar or the shrouds will be overlapped, so I use it to hold it in place while shifting it.
The construction is crude. The Pipe is crushed when you tighten the Bolt through the fixed hole, and the texture is pricey.
View detail
For Transporter
I bought it for my Transporter.
DRC is an image for off-road motorcycles, but I use it for road motorcycles.
You can use it folded or stretched out, but it's always folded.
I use it with a wooden board because it moves quite a bit if it is a Single Body when I put it in the car.
Finally, I don't get much out of it now because I feel like I'm loading the Tire into the Seat of the car now, which is like bumping the Tire into the Seat of the car.
When I load MOTARDs, I use the Handlebar because it may not be able to be applied to the Seat when I load them.
View detail
Simple Stopper
Basically, you can use it by fixing it to something I remove the Center console from my car and make my own stand for fixing it
I think it was originally intended for off-road vehicles, but it can also be used for 250cc 17in. on-road vehicles It was available
However, the tire width is going to be a little tougher as it gets thicker
Also, if the tire width is narrow, be careful not to interfere with the Brake Disc when the vehicle is tilted It seems to be necessary
It's a good product to use after understanding the various caveats
View detail
Suppresses movement of Front wheel
When carrying Motorcycle on a Transporter, this product is unnecessary if you can cut the Handlebar and press the Front tire against the corner and fix it.
It is necessary for those who want to straighten Motorcycle and straight down.
If the Front wheel can not be fixed, it may move during transportation, the Tie Down may loosen and the Motorcycle may collapse.
Even when carrying a Front tire against a foldable Second seat such as High ace, the Front tire is Quantity : Pair (for Left and Right) It is safe to use this product because it may move to.
I have KX 450 F on Nissan's NV 200, but I removed the Drink holder at the back of the Center console, attached the Aluminum board and fixed this product on it. I install it between the driver's seat and the passenger's seat, but I can install it without particularly difficult processing.
Please install for the protection of Motorcycle and Transporter
View detail
Simple design's Tire stopper
I bought it as a stopper of Front tire when loading off-road motorcycle in Transporter.
The photo shows the Front tire of WR 250 R (80 / It is like seeing 100-21).
This product "Stopper to keep Motorcycle from moving forward" , "Can stand on its own without using Side Stand" Please note that it is not a kind of item.
This product is a hole for fixing Bolt to the floor (Φ 8. 5 × 4 places) are free. I think that it depends on the material of the floor, but there is a feeling of uneasiness that it is likely to move if it is not fixed.
In my case I wanted to change the place to load freely, so I bought Aluminum board to replace the floor and made it like a photo. The place where I pasted the same FlooringMatte as the floor of Transporter is really Oshanti (Actually, Matte was just surplus). I cut and pasted the Rubber board as a nonslip on the back.
The width of Pipe is delicately distorted, Penetrating to Pipe and free Φ 8. The hole of 5 is bent, the welding of the bottom plate is subtle, the board is oblique - - And the solid I bought was bad accuracy.
Pipe's Penetrating hole was bent a bit.. Bolt does not get straight in (Tears)
Because it is only a thing that stops Tire, I think whether it is good or not, and even though it is a ready-made product, I have not failed puncturing and welding like this. Do your best.. I also thought that I was honest. (Lol)
■ Dimensions (mm)
Outer width of Pipe touching the floor : About 170
Pipe diameter : Φ22. About 4?
From the end of the bottom plate to the edge of Pipe : About 200
Hole for fixing Bolt on the floor : Φ8. 5 X 4 places (Holes on the bottom plate are Φ 8. 5 and Φ 14. 5 holes are overlapping and vacant. It seems that M8 ~ M14 can be used)
View detail
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (i
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (it is --, although reason is not known but it is still wonderful).Since paint application can be easily deleted by contact of metal, the direction to worry considers that it is better to stop. View detail
Since I went out for the expedition of a Motorcycle well, this product purchased this product. When loading the Motorcycle into vehicles and moving, it could carry, where it fixed this product to vehicles and the Motorcycle is stabilized ve
Since I went out for the expedition of a Motorcycle well, this product purchased this product.
When loading the
Motorcycle into vehicles and moving, it could carry, where it fixed this product to vehicles and the
Motorcycle is stabilized very much.
Since the
products are also firmly made very much to details, it can use for a long time.
How about trying [ you ] once, since I will think with
that it is convenient if there is this product in migration in the
Enduro race, a Transporter, etc.?
View detail
Although I participated in the Mini bike race or the Enduro race well, only by the Tiedown, I was somewhat worried and purchased this product. If there is this, a Motorcycle will be stabilized very much. I think that they are very good goods since
Although I participated in the Mini bike race or the Enduro race well, only by the Tiedown, I was somewhat worried and purchased this product.
If there is this, a Motorcycle will be stabilized very much.
I think that they are very good goods since it can attach easily.
Corresponding also to a 21-inch Motocross Motorcycle from the Mini bike at it, this finds it useful.
I think that you may buy it since it can be satisfied although an honest price is high!!
View detail
being stabilized -- a Motorcycle -- in-vehicle する -- since things are made, it stacks since it can stack in a similar manner each time, and doubling is decided, it is easy.
being stabilized -- a Motorcycle -- in-vehicle する -- since things are made, it stacks since it can stack in a similar manner each time, and doubling is decided, it is easy. View detail
Only by the tiedown, since it was uneasy although a motorcycle is put on a transporter, it attached to it. If it is, is sense of stability completely different?
Only by the tiedown, since it was uneasy although a motorcycle is put on a transporter, it attached to it.
If it is, is sense of stability completely different?
View detail
Although a motorcycle is loaded into a trailer in the case of expedition touring and I go, since my trailer is mulched Lehrer with not the object for motorcycles but a flat loading platform, stability has some uneasiness only by fixing a motorcycle by a t
Although a motorcycle is loaded into a trailer in the case of expedition touring and I go, since my trailer is mulched Lehrer with not the object for motorcycles but a flat loading platform, stability has some uneasiness only by fixing a motorcycle by a tiedown belt.
Then, since a motorcycle was fixed firmly, the wheel chock 2 standard here was attached to the trailer.
Only with a one point's sticker, although appearance is modest to black paint, since the loading platform of a trailer is also black, it matches it comfortable.
Since the bolt of attaching was not attached, it prepared two about 6-mm bolts separately, and it made and installed the hole in the loading platform with the drill.
Since a front wheel can be firmly held at the time of loading, when a motorcycle does not move forward and backward at the time of acceleration and slowdown of a transporter and the loading platform has got wet with rain etc., there is also no fear of a tire sliding on a cross direction by vibration, and a motorcycle falling.
Although it is actually used at the time of an expedition, since loading more positive than the time of borrowing the truck by rental car can be performed before purchasing a trailer, it can move in comfort.
Although the attachment and detachment and high-class type wheel stopper with easy folding of a direction which makes a transporter 1BOX car used also for home use may be good, if it is the trailer and transporter only for a motorcycle, I will also regard products here enough also in an engine-performance side as all right.
View detail