Reviews
OEM so it can be pontooned.
In case of GSX1300R HAYABUSA, I think WhiteCoupler and BlueCoupler in RearSeat are free, so it is OK if you connect this, and it is a kind of easy handling. I think I can handle Cable's handling in roughly 30 minutes. I have no particular complaints about the operation, and I think it is a good cosmetic product.
I think the Wiring required is limited, so with a little knowledge (UniversalWaterproofCoupler and a specific WiringLine) I think it is something that can be used universally.
View detail
Fallen cannibals
Installation requires some knowledge of motorcycle tinkering, etc.
The alarm sound is perfectly Large. I think it is effective against theft. (I don't want to be in a situation where the alarm is actually sounded though…)
What I like most about this product is that it is Key less and easy to operate.
No more keys to mess around with and get in the way, and they can be turned off when not needed.
Quantity:I would have been happier if the sound when setting was smaller.
View detail
Anti-Theft Measures
The car is old, so there is not much space for installation, but the Body and Alarm were Compact, which was a big help.
Other anti-theft measures use a REMOTE CONTROLLER or a key, which increases the number of Included Parts:, but since it can be turned on and off only by operating the key on the Body, there is less stuff to carry around.
During the time lag after the operation, the Motorcycle Cover and other lock chains can be applied, and I felt that this was thoughtful of the user.
View detail
Anti-theft measures
The Body was also Small Type and fit well in an old car with little storage space.
Unlike other products, there is no need to replace batteries or use a separate remote controller.
View detail
To prevent theft.
Security On with Motorcycle key (A squeaky sound will be heard.) I think it is convenient to be able to off
Installation should not be difficult for someone with some experience.
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
HONDA original siren
My motorcycle is HONDA PCX150. My job is a delivery person. I often need to park the motorcycle outside, so I need an anti-theft device. I have seen the general style of other brands before. I don’t like it because it needs to be installed with broken wires. Webike The HONDA original alarm purchased on the website does not need to be broken and installed. The motorcycle has a reserved interface and can be plugged in. I am very satisfied with this purchase --------------- ---------------------------------------------- My motorcycle is HONDA PCX150. occupation is a takeaway. I often need to park the motorcycle outside, so I need a anti -theft device. I have seen the universal style of other brands before. I do n't like it because I need to break the line. Honda original Honda's alarm does not need to be installed by the line. The motorcycle has a reserved interface plug in. I am very satisfied with this shopping Powered by Google Translator View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300AS, YAMAHA FJR1300AS, YAMAHA FZ8, YAMAHA MT-07, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA SCR950, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Easy to use original burglar alarm
My motorcycle is YAMAHA MT07. I often need to park the car on the side of the road. In order to prevent the car from being stolen, I need to install an alarm. I have seen other brands on other websites before, but most of them need to be broken. Or punch holes for the vehicle, I don't like this installation method, so I bought this original alarm on webike, non-destructive installation, the motorcycle has a reserved interface, just plug it in directly, the sensor has three The three induction modes can be adjusted, the vehicle shakes, and a loud alarm will sound. -------------------------------------------------- -------- My motorcycle is YAMAHA MT07. Because the bike is often parked on the side of the road. In order to prevent the vehicle from being theft, I need to install an alarm. I have seen other brands on other websites before, but most of them need to break the line. Or punching the vehicle, I don't like this way of installation, so I bought this original alarm on the webike, which is not damaged, and the motorcycle has a reserved interface. The sponsor mode can be adjusted, the vehicle shakes, and a loud alarm will be made. Powered by Google Translator View detail
Fits: HONDA Rebel 250, HONDA CB250R, HONDA Rebel300, HONDA CB300R, HONDA CB250R, HONDA LEAD125, HONDA CBR250RR, HONDA CBR250RR, HONDA CL250, HONDA EM1 e:
Buy peace of mind even if you have to pay Gold!
It's OEM, so it's solidly built, no malfunctions.
It rings when you need it.
I was parked in the parking lot of a shopping mall when I returned from shopping and a stranger was standing in front of my Motorcycle.
first tone I didn't know you had Alarm on your phone. I was told
I don't know what kind of person he/she is, but I thought it would be a good preventive measure to prevent pranks etc.
In the case of REBEL, installation is probably easier, but if you are a beginner in maintenance, I think it would be safer to ask a store to install it for you.
View detail
Safe to use
It is installed on a PCX125.
Quantity when leaving Motorcycle at PetitTouring destination:It is safe to Set.
It is really reliable and responds well during TEST.
Sensitivity adjustment can also be easily performed by simply reconnecting the Wiring.
There is also a Type that can be adjusted by REMOTE CONTROLLER, but it is not possible to adjust it at the time of Setting.
This adjustment method is helpful because the sound is rather loud and I am very careful about it.
Furthermore, the type that adjusts sensitivity with the REMOTE CONTROLLER can be changed when batteries are replaced or when maintenance is performed.
If I remove it or something, I have to set the sensitivity all over again.
This is an Analog method, so there is no need for that.
View detail
Fits: HONDA Rebel 250, HONDA CB250R, HONDA Rebel300, HONDA CB300R, HONDA CB250R, HONDA LEAD125, HONDA CBR250RR, HONDA CBR250RR, HONDA CL250, HONDA EM1 e:
THE OEM
It was installed to prevent mischief.
I don't feel the effects yet, but I feel like I've purchased peace of mind.
View detail
It's not as good as a cheap Alarm lock.
It is a very good product with high cost performance. Ease of installation, sensitivity and volume are all good.
It's much more reliable than the mysterious AlarmDisc Lock or REMOTE CONTROLLERAlarm sold by mail order, which can be more problematic after a while of use.
View detail
Good stuff
The SEA BASS OEM Option didn't have one for the GSX-R1000R, so this is the product for you I chose the
There is no child device and the operation is Simple, same as Yamaha's OEM Alarm
Sensitivity is good due to the tilt sensor system
I'm sure this is how loud the Buzzer is, but like the YamahaOEMAlarm It would be even better if the Buzzer could be added to the Buzzer to make it Large volume
View detail
Easy to use
I'm installing it on my son's HORNET 250 tail cowl
It's also very sensitive
It's easy to install, just connect it to the Battery
You can also adjust the sensitivity, so you can set it according to your parking conditions
If you turn it on when you enter Convenience or a restaurant in a touring destination, you can hear the sound of it working
You can Appeal around it, so you can be assured of that
View detail
It is the best cospa.
I was suffering from the choice of type of security device installed in the vehicle.
Net I tried to compare a lot but I bought it because it is easiest to install and is functionally superior.
Installation completed in about 30 minutes!
REMOTE CONTROLLER operation is unnecessary, it is convenient as Main key 1 pc completes.
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
After 16 years to Grom!
- Decision of purchase
I went to Honda DREAM for 6 month check this month and if I was talking about Security, from a clerk "It is necessary if Custom has done so far!" It was a word of. As expected, Parts that can be easily removed easily come to a lot, so I bought it for Security Enhancement.
- Impression after using it
Handling after installation Looking at the Instruction Manual Setting method - I checked how to release at refueling. I can not describe detailed contents for Security, but I can understand it as soon as I try it several times. Since there is also a balance with the Dirts Japan OP Top Indicator also for cancellation at the time of refueling, it was necessary to adjust the TopIndicator side slightly. After setting, I checked to sound an alarm sound for operation confirmation. Here too, because of Security, it is impossible to post what warning sounds will sound in what movement, but you can protect your favorite car Grom firmly!
- Mounting difficulty
Installation method is also Security, detailed contents can not be posted, but individuals are also possible. Just maintenance Kill is necessary because it is necessary! Afterwards SpeakerWiring is slightly longer so I installed it by processing original. By the way, although handling Instruction Manual is included in the product, installation Instruction Manual is not enclosed on Security, so it is caution. If you have maintenance service Kill you can understand even without installation Instruction Manual!
- Others
Although the posted image is only AlarmBody and Speaker's publication, once you open the item you received AlarmBody - Speaker - Double-sided Tape - Tying Band - Security sticker(Large - Small) - Handling Instruction Manual - A warranty card was enclosed. When installing on Grom, Honda : Alarm and Honda : Can be installed if Indicator Lamp is available. By the way, it is posted in the number 08E70-HAC-000 of this person in Grom Accessories described in Honda's Homepage. For reference → http : / / www. honda. co. jp / bike-accessories / GROM / security / index. html
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA MT03, YAMAHA MT-25, YAMAHA MT-03 (2015-)
feel well.
Can be attached to MAJESTYS. OEM may feel safe!
Alarm will not work unless you pick up Bike Cover very roughly if it is boxing sensitivity.
You can adjust the sensitivity so you can set it as you like.
Since it is necessary to remove around the Front for installation, it is better to ask the Motorcycle shop for those who can not remove it.
View detail
A compatible size guy!
Antitheft Alarm has few things that can set the sensitivity if it is a cheap item, but I purchased this Alarm because it was set up.
Alarm used before, before the vehicle etc etc. To Truck and outside the company Exhaust System cars and Motorcycleetc. But it caused only inconvenience to the residents of the area by reporting only by passing, so it is saved Large that you can set sensitivity like this product.
The alarm sound is sufficient for repelling Prank.
Dissatisfied, I thought that sensitivity setting method is simpler if it can be done with Body instead of REMOTE CONTROLLER. Because I thought that setting will not change so much once I decide ...
Also, since Body has Speaker, I wanted it to be Waterproof Specification.
Although I am somewhat dissatisfied, I think that this function is good at this price.
View detail
Easy installation Easy operation
Body is first compact.
If so, you can install it on various models.
Just connect Battery's Plus, Minus and Attachment power supply to Body's Wiring.
After that I connect Speaker and LED Pilot lamp to Body.
Speaking of Demerit in Security alarm, power consumption and malfunction.
This product consumes less power, it is safe for those who ride only occasionally.
Also, since it is only tilted Sensor, there is no malfunction in wind etc..
It is cheap and easy to install.
The operation is linked with the Main key, consumes less power and has no malfunction.
I did a very good shopping..
View detail
Installation of the second unit
I purchased it before and it is the installation of the second one.
Set can also be set with Main key, so key does not increase and it is good. Recently it is safe to leave Motorcycle for about a little because of Prank and theft worry. This alone does not make perfect crime prevention, but there is nothing if there is There is no doubt that one who had had.
View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300AS, YAMAHA FJR1300AS, YAMAHA FZ8, YAMAHA MT-07, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA SCR950, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Easy installation
The installation time was 30 minutes, but it took around 1 hour to remove the Cover etc, remove the Battery cable, etc.. Connection and installation of Body is very easy. There is already a Harness in the Side cover and only connects, but since there is no connection Wiring diagram together, it was a bit difficult but it is nothing if it ends. I think that it is better that you go to Shop such as YSP and confirm the installation place and direction of Sensor by confirming it.
Because it is only handling Instruction Manual on packaging.
View detail