Reviews
It's not durable.
When I bought a new motorcycle, the YAMAHAMotorcycle Cover I was using before was no longer available in terms of size, so I bought it instead.
It was quite good in terms of rain protection, but after a year of use with Blue empty parking, the surface coating was peeling to shreds and the fabric was ripped in places.
I think the product is supposed to be used outside due to its characteristics, so I would like it to withstand at least twice as much.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
Fits: YAMAHA ZEAL, YAMAHA TRZ250, YAMAHA SR400, YAMAHA BWS125, YAMAHA R1-Z, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI VanVan200, SUZUKI ST250, SUZUKI RGV-y250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, KAWASAKI Ninja250R, KAWASAKI Estrella, KAWASAKI BALIUS, KAWASAKI 250TR, HONDA JADE, HONDA HORNET, HONDA NSR250
Dissolves quickly.
I bought it for my 250TR and it melted just by touching the OEMExhaust System.
The fabric feels a bit better than the Daiso Bicycle Cover, very thin and light.
Scooter would work.
It would be good to take it to Touring and use it.
View detail
I want you to write down the Large size of Disc Lock.
The wire lock works normally, but the disc lock could not be used due to its large size.
REBEL250
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
A little difficult to use.
Used on MF17 with FORZABOX. There is no problem with the dimensions, but there is only one place on the back side to squeeze the hem strap, so it is difficult to squeeze the hem as desired. The other manufacturer (company name withheld) that I used to use on other motorcycles was very easy to use because it had both front and rear hem apertures. I bought this one because that manufacturer was expensive, but after about the fifth time I used it, the place where the string comes out was torn because I pulled it too much, so I ended up replacing it. It is too good to throw it away, so I will keep it for two sheets in case of stormy weather. I'm going to give up on it. View detail
Fits: YAMAHA ZEAL, YAMAHA TRZ250, YAMAHA SR400, YAMAHA R1-Z, YAMAHA BWS125, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI VanVan200, SUZUKI ST250, SUZUKI RGV-y250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, KAWASAKI Ninja250R, KAWASAKI Estrella, KAWASAKI BALIUS, KAWASAKI 250TR, HONDA HORNET, HONDA JADE, HONDA NSR250
I need size figures written down. (´-ω-`)
SYM's NHT125 (L/W/H:2,068×860×1,195), but I never imagined that it would be a pincushion with the whole bottom half exposed when covered.
At any rate, I've managed to replace the MT-10's cover with one that I think will be useful, although the MT-10's is now spick and span. (´-ω-`)
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
I'm hit.
I just received this from Webike? I opened the box and found what's this?
The box was like that but with cushioning material and a flattened bottom.
I didn't expect it to be vacuum packaged.
But so much for the face White….
Well, it's okay, because they seem to be that particular about not lowering the quality.
The texture is not bad, so I wonder if the much touted 300D will perform as well as it should.
So you open the package and hope for the best. And then I put it on my Motorcycle.
I got cheated again….
I'm a dick….
The ZX-6R is listed in the "Compatibility" section of the manual, and even though the size is the same as my old Doppelganger, I can't help but notice that the ZX-6R is a ZX-6R.
It's no different than Size. But when I actually put it on, it's just a little bit too small.
I really wish they would test it on a real car before claiming it as a compatible model….
This one is even worse. Even a certain Yamaha's F Type guy could have entered Beauty if he had folded LeftMirror.
This is not good at all! Even if you fold up both Mirror, you can see all the way down to the Rear tireRim which is very tight….
The hole for the security chain, which looked large in the picture, is slightly small and does not fit through at all.
I really want my Gold back. Otherwise, I want to change it even if I have to pay the chase Gold to one higher Size….
That's not how it works anyway, right?
I had a bad feeling because this Motorcycle has a big head. But a certain Mr. Doppel's and Size are not so much.
I believed in them and bought them because they didn't change. And now I'm being treated like this.
The quality is not that bad, just not so bad as to make it easy to apply Cover.
It's just a little easier to put on. That doesn't make it bad.
But it doesn't fit the size of the latest Kawasaki cars at all. Because I have a big head.
You know what, you need to measure the actual car properly before you put the name of the car model in the compatible car models. Seriously.
You can't even return it after you've opened and used it, can you? I really want you to stop this!
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, BMW G650 Crossmoto, BMW K-1 (Japanese kick-boxing promotion), BMW K1100SR, BMW K1300R, BMW K1300S, BMW K75, BMW R1200R, BMW R80, BMW S1000RR, DUCATI 1000, DUCATI 800, DUCATI 999S, DUCATI 999SS, DUCATI Monster1000, DUCATI Monster1100, DUCATI Monster1100S, DUCATI Monster800
There's some kind of seepage...
Used for outdoor storage.
When I removed the Cover and checked the Motorcycle after it rained, there was some White Stain on it...
Apparently, every time it gets wet, this Cover's Waterproof (Fire protection?) The ingredients seem to be seeping out.
Fortunately, the stain is easily removed with water, but it is too much of a hassle to have to wipe it off each time, so I would not repurchase.
Also, it is pretty peLePera and has a lot of room in the Size, so it flops around a lot when a strong wind blows.
View detail
I feel like I need another 5-10cm of length.
I would like to have a little more length to use it through the chin of a full helmet or to prevent the Motorcycle Cover from rolling up, but the 900mm on this is too long and it is too close.
Padlock is just a common one with a Cover on it, so it might be better to buy it separately?
View detail
Fits: KAWASAKI W400, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA X11, HONDA X11, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000, HONDA CBR929RR, HONDA VFR800, HONDA VFR, HONDA CB750FA, HONDA CB750FZ, HONDA CB750FB
Price is reasonable. Heat resistant pad comes in a single piece.
Car models used:TRX850 Size:3L
I have been using Y's Gear Motorcycle Covers with Repeat for almost 20 years, but was attracted to the low price and decided to give it a try.
In conclusion, I should have chosen Y's Gear even if it was expensive. The material texture is cheap, but it looks reasonable from a distance because it is black. It is a pity because I would like to put it on the back. The heat resistant pad is only one piece and does not fit my car which has two Exhaust System. I looked at the product specs again, but the quantity of the heat resistant pad is not written. However, 3L is a Large type for Vehicle, so the standard is 2 pads, right? Also, they made me choose 3L because of the fitment guarantee, but it's too big. Too bad.
View detail
Fits: HONDA SPACY100, HONDA SPACY125, HONDA LEAD110, HONDA LEAD50, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, Vespa PESPA 125, YAMAHA AXIS 90, YAMAHA CYGNUS 125, YAMAHA CYGNUS 125SR, YAMAHA CYGNUS 125X
not very good
It is difficult to cover with PeLePera, and if it rains, the Motorcycle will be drenched, and I think it can only be used for dust protection in a place where it does not rain. View detail
A product that still has room for improvement.
The product is easy to install but still has room for improvement.
This is because it is possible to remove it from the handlebar depending on the car model. It is absolutely necessary to devise and improve it so that it cannot be shifted to the side.
A simple Immobilizer, which makes a noise when it detects vibration or something unusual and alerts a smartphone, would be much more useful in current products.
View detail
Fits: HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80LT, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI WOLF200, SUZUKI WOLF250, SUZUKI ST250, SUZUKI NZ250, KAWASAKI Z250FT, KAWASAKI Z250FT, KAWASAKI Z250LTD, KAWASAKI Z250LTD, KAWASAKI ZXR250
Too bad Large change. (This is my personal opinion.)
I bought a new Motorcycle to replace my old one, but the fabric is much thinner than I thought it would be!
My previous Cover in a similar price range was much more solid.
(○Mazon) I also had to apply the heat-resistant sheet of the Exhaust System by myself.
It takes a lot of time and effort. I ended up ordering the Cover I used before again.
Maybe things would be different if they were of a higher grade? It may be different for the higher grade, but the cost performance is not so good.
View detail
Fits: YAMAHA BWS100, YAMAHA Cygnus X, YAMAHA Grand Axis, YAMAHA Axis Street, YAMAHA YBR125, YAMAHA VOX, YAMAHA GEAR, YAMAHA BWS50, YAMAHA BWS125, Vespa Priavella 125, Vespa GTS300ie, Vespa GTS250ie, SUZUKI Vexter 150., SUZUKI Vexter 125, SUZUKI Address V110, KYMCO Racing King, KYMCO Racing 150, KYMCO Racing 125, KAWASAKI D Tracker 125, HONDA Lead EX
Seat is a good one.
It was covered with a PCX125, but it flew away during a typhoon!
It was also sunburned, so I gave up on it, but it seemed to deteriorate faster than the Seat over other vehicles!
Seat is a good buy, even if it's pricey!
View detail
instant killing
I did the destruction test at my own expense, and as a result, if you have a Nipper and Scissors, you can disconnect it in about a minute.
If it is only a Clipper system like a product image, it may be able to escape a little if it is only a blade system attack, but it cuts Wire with Nipper first, and it cuts it with Scissors from there, and it cuts it in a normal way.
If the wire is covered with fibers, it might still be hard to cut, but it's attached in a way that exposes the surface with 2-3 fibers, so it's instantaneous.
It may be effective against those who are just passing by with empty hands, but I think it is powerless against those who are approaching with a clear intention to steal.
View detail
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
This is a product that will not last long.
I've been using it for about a year and a half, and the material in it turns into a fine powder that falls on the car body.
It's also possible that it's because of the way the Cover was stored outdoors, but I felt that there was a problem with the durability that it would become so in one year.
View detail
Fits: KAWASAKI DevilHUNTER, HONDA APE50, HONDA JAZZ, HONDA SuperCUB110 , HONDA ZOOMER, HONDA DREAM , HONDA BROAD, HONDA MAGNA50, HONDA LEAD80, YAMAHA RZ50, YAMAHA TZM50, YAMAHA YB-1, YAMAHA YB50, YAMAHA GRANDAXIS , YAMAHA CYGNUS125, YAMAHA MATE70, SUZUKI ADDRESS100 , SUZUKI ADDRESSV125 , SUZUKI VECSTAR125, SUZUKI STREETMAGIC
SUPER CUB 50
I bought it because it was cheap
When it rains a lot, it seeps inside, but I think it's better than not applying it.
I think it is better to use it with WaterproofSpray on.
View detail
Fits: SUZUKI GSX-R1000R, APRILIA RSV1000mille, APRILIA RSV1000mille, SUZUKI GSX-250R, SUZUKI GSX-R1000, YAMAHA YZF-R15, TRIUMPH Thruxton R, YAMAHA YZF R-1, YAMAHA YZF R-6, SUZUKI GSX-R750, TRIUMPH Daytona 675, SUZUKI GSX-R600, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-400S KATANA, MV AGUSTA F4 1000, SUZUKI GSX-125R, KTM RC390, MV AGUSTA Brutale 800, KAWASAKI NINJA400
High-end Motorcycle Cover
outline
Motorcycle Cover with high protection performance.
Reason for purchase
I was looking for a Motorcycle Cover that would not scratch my Motorcycle and I found this product.
Appearance etc.
Included in the box is a Motorcycle Cover, a bag to hold the Motorcycle Cover, and a fixed Belt.
The inside was not a crumbly fabric, but a soft fabric was used for the parts that touch the Motorcycle, and it felt like a double layer with the outside fabric.
how to use
The basic method of hanging the cover would be the same as a regular Motorcycle Cover. Hang the cover from the rear side, and then hang the front side. After that, there is a front and rear drawstring, so pull the string and draw it down.
Impression used
I have been using it for about six months without any scratches on the Motorcycle, so I have the impression that the soft inner fabric is working well.
Compared to cheap Motorcycle Covers, the thickness and Material of the fabric is obviously different, so you can tell that they are made of good stuff.
I wonder if the fabric of the exhaust system part is heat resistant to some extent, since it does not melt due to the heat of the exhaust system even if it is applied immediately after use.
Since the size is just right, the front part of the Motorcycle Cover seems to be slightly caught on the Mirror when removing/attaching it, so it may require some hang to hang it.
When it rains, water leaks through the joints and the inside gets very wet and stuffy. It is better to put tape on the joints, etc. by yourself.
Durability is unknown, but the underside of the fabric looks a bit weathered, but not to the extent that it affects functionality.
Improvements
It is scratch-resistant, but leaks badly from the joints, so I don't think it is a good enough product to be called a masterpiece.
View detail
To Earth Rock.
I bought this for my earth lock.
The length, thickness, and construction are perfect, but
After using it for a while, the Cover became tattered.
I would have been more satisfied if the durability of the Cover was better.
View detail
Fits: YAMAHA Grand Majesty, YAMAHA majesty, YAMAHA T-MAX, SYM RY250, SYM RY250EFi, SYM RY180EFi, SYM RY200i, SUZUKI Sky Wave 400, SYM RY125i, KYMCO XCITING250, SUZUKI Sky Wave 250, KYMCO GD250Z, KYMCO GD250Z-125Z, KYMCO DINK 200, KYMCO GD125Z, HONDA forza, KYMCO DINK125, SYM RY250i, HONDA silver wing, HONDA foresight
It's okay (A little worse than...)
I bought this one because the one I had been using tore during a storm.
The fabric is PeLePera, and I'm worried about tearing it up as soon as possible;
The keyhole is only on the front wheel side.
I have a GIVI top case, but the rear wheel side looks a little tire. 。
Because the fastening of the middle part is String, it is difficult to tie up even if it is a gentle breeze.
I should have gone with the Buckle type.
Well, considering the price, I'm not sure if it's worth it, but
Now I think that I should have chosen something that I can use with confidence even if it costs a little more gold.
View detail