Reviews
Select Length
We selected this product to install Tire's wireless Air gauge Monitor.
The large handlebar may be difficult to tighten depending on the installation location and angle.
I chose the standard size without thinking, but the short size seemed to fit better.
You may choose Standard or Short by taking measurements of the mounting location.
View detail
racing (of an engine)
To install Tire's wireless Air gauge Monitor.
We chose this product, which uses Stem holes, because we did not want to increase the number of conspicuous Mounts.
I could not get the installation to work and when I repeated Cut, it went blank.
Instead of following the instruction manual, once the cut is made, the Stem hole should be filled to the Limit.
Tightening Bolt and expanding Body may work.
It will not come off, so it will be used as is.
View detail
I installed it myself.
I think the performance is perfect. But, the SDCard comes with 64G forcibly. Why can't we freely choose the card we think we need? 21Gα+128G Quantity:I was very confused with Set. View detail
Fits: Others
Safe and secure DRA RECORDINGS are a must from now on!
I installed it on a 2021 ninja 250.
The connection itself is easy because it is color-coded, but the wiring was quite large and strange.
Since it is a Motorcycle with Cowl, this is not a Minus rating, as it cannot be helped.
I was worried about taking out the ACC power supply and creating and connecting the Bullet Type Terminal, but managed to do so.
Picture quality is fine.
Using the smartphone app is easy once you get used to it.
You can check the video from your phone on the spot and download it to your phone.
Items purchased in addition to the above
Power Outlet Port Harness
Brand:KITACO:KITACO Item number:756-9000400
Terminal set
Brand:amon:Emon Item No.:E2
Camera Bracket for EDR
Brand:MITSUBA:Mistuba Sankowa Item number:EDR-P04
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
Just right for a driver's recorder.
For storing DriveRecorder data.
It is an ordinary small SDCard. It is inexpensive and 8GB is not so much of a problem.
A special case is also included to prevent accidental loss.
View detail
The highest quality DriveRecorder for Motorcycle at this time.
The price is the best at the moment, but I think it is the best quality DriveRecorder available at the moment.
I purchased the EDR-21Series because of its good reputation.
Was the one you received as per Image?
The outer box was Small clean and solid.
The body looks like Aluminum Alloy, so it seems to be high quality and heat dissipation is good enough.
I don't know if it was damaged when it arrived or during installation, but there was a small scratch on the Camera part that did not affect the Lens.
[How did you feel about the Fit?
Installation was done by myself.
The Body was converted to a Small Type and could be installed under the Seat without any problems.
It is located out of sight under the basic Seat, but I think the appearance is also Stylish and good.
Camera Bracket sold separately for both front and rear cameras (EDR-P05) The product was installed using the
The front camera is attached to the bolt on the front cowl with a commercially available bracket.
The camera was mounted with a commercially available bracket.
The length of the Cable is about right for the rear Camera, and about 20cm is left over for the front Camera.
The Switch and GPSAntennas sections also had about 20cm extra each.
How was your experience with it?
I think the images are beautiful enough to be used for checking images at the time of an accident. Traffic lights appear without any problems, and the blurring of the image has been suppressed to a great extent.
For those who do motoblogging, etc., the video will be a bit rough. Please use ActionCam separately.
The Microphone is attached to the Body and is placed under the Seat, so the Wind Cutting sound is barely audible. Sirens and Horns of emergency vehicles at railroad crossings and approaching vehicles were recorded without any problem. Melody sound of pedestrian signals was not heard. Basically, only the Engine sound of my car was recorded.
What are the specifications of the product?
I am very satisfied with the functional aspects of the Body itself.
The app for smartphones and the PC version of PuLayer are also fine for basic functionality.
It is sufficient for use as a video confirmation in the event of an accident.
It would be nice to have the ability to change the screen Layout for use as a travel log.
The PC version of PuLayer also has a GPS log output function, so you can use it in a more advanced way by editing it yourself, etc.
[Was there anything that disappointed you?
There is a gap between the microSDCard insertion area and the Body, and I have almost been unable to remove the SDCard due to accidental entry.
Particular attention should be paid to frequent insertion and removal.
How did it compare to other products?
DAYTONA's DriveRecorder has both GPSAntennas and Microphone functions in the switch section. I didn't want to do that, so I bought this product.
[Others]
Double-sided tape is included for fixing the body, but it is difficult to insert and remove the microSDCard while the body is fixed.
We recommend using a Surface Fastener to secure it.
View detail
For sudden rain
Navigation, forms, etc. are provided for rain protection.
It often rains suddenly while touring, so the bag can be quickly inserted for waterproofing.
It is durable and very convenient.
View detail
Fits: Others
I bought it thinking it was a good luck charm!
Recently I have been feeling the need for a driver's license recorder due to various problems. I decided to purchase one for my own protection. The installation itself is easy and the instruction manual is very helpful. The app for smartphone is also very easy to set up. The images are clear and I think I made a good purchase. (^O^) View detail
Fits: Others
For peace of mind
I put it on in case of emergency. I don't know how durable it is yet, as I haven't had it on long enough. View detail
I was able to install it on my Ninja 1000.
It was originally designed for the Ninja 1000SX, but I decided to install it on the Ninja 1000, hoping that it would work on the almost identical Ninja 1000.
I was able to install it with no problems at all, and since it's an Exclusive Design, it doesn't feel like an afterthought. The year is 2017.
In order to prevent the cowl from cracking when the screw is tightened, I put a collar and washer in the step of the hole. A KITACO collar with an outside diameter of 11mm went in nicely.
In order to remove the Mirror, you need to remove the Meter area.
If you can remove and install the Cowl by yourself, you will have no problem.
View detail
The REBEL250 SEdition came with a Large
I bought this for my REBEL 250 SEdition to attach the FrontCamera drrorecorder to it.
of the same product before purchasing this one. "Φ40-Φ45" I bought the Size, but the Size was just a little short, so I bought this additional one.
As a result, this one was too large.
This is "Φ49-Φ54" So I thought I could make it work, but it seems that the middle Φ47 or so is Just fit.
If you are concerned about installation, etc. "Φ40-Φ45" I've also reviewed the Size, so please check it out.
The Bolt could not be installed there, so I used the Tie Band.
This one is too loose, so I put Seat in between.
I can't decide which is better yet, but I don't think there will be a large change if I buy either size, since it doesn't shake that much.
View detail
It was a little short for the REBEL 250 SEdition.
I bought this product because it is compatible with the REBEL 250, but it was not long enough for the SEdition with Fork Boots.
I thought it might be a little loose, but it feels fine for use on regular roads.
Since the Dr-Recorder is made in China, I can't use Bolt, so I use Double-sided Tape to attach it to Bracket.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
just right
I bought this product because I replaced the Handlebar and the Mount I was using before could not be installed anymore.
Installation was easy with the Mirror bolt.
I was able to place it in just the right spot so I could easily see my phone.
The product itself looks cheap, but the plastic part is thick enough to resist cracking.
View detail
Fits: Others
It's as good as I expected.
As for the durability, I am not sure since I just started using it. Installation was not a problem, as the instruction manual was easy to understand. If I were to ask for more, I would appreciate it if the thickness of the body were a little thinner, as it is difficult to find a good place to install it on the Z250. View detail
I wanted this.
In the case of a normal Arm, the direction in which the Arm moves in relation to the Base and the direction in which the phone moves in relation to the Arm are the same, so if you want to point the phone at yourself, even though it can swivel slightly, the mounting location is limited. However, if you want to connect two short arms with a ball, it will be very large.
I used to ride a Valkyries that had a large handlebar and windshield, so I was able to get away with it, but I switched to a Bolt that had a small handlebar and windshield, so I found this product when I was wondering where to install the Base. If not for this, I would have only been able to mount it in a way that would have made my phone stand out quite a bit.
The purchase price was 2530 yen. It has more parts than the usual two short arms (1320 yen), so I think it's pretty inexpensive.
View detail
Fits: Others
It's as good as I expected.
As for durability, I don't know yet since I just installed it, but I am fully satisfied. View detail
Fits: Others
Unique Camera Bracket made by Genus Gold
I installed it on the Scooter that I use for shopping, etc.
At the time, I bought it at a supply store instead of Webike because they offered a Large capacity SDCard in the store as part of a campaign.
At the time of purchase, I had a DAYTONA DDR-S100 attached to the front of another motorcycle, but I chose this Scooter because I can fit the body in the helmet, and there are also ones with GPS, but since I run around the neighborhood, I don't have GPS. I chose this one because it can be used as a front and rear 2 cameras.
The body is attached to the inside side of the helmet with double-sided tape.
The GSensor is oriented so that the SDCard slot is on the bottom of the Helmet in, which makes it difficult to remove the SDCard, but unlike the DDR-100, the video is overwritten on this Dramera, so I can replace the SDCard and use the smartphone app to format it. However, unlike the DDR-100, the video is overwritten, so I can change the SD card or use the smartphone app to format it, so I think it's okay to leave the card in.
Also, since the recording microphone is on this body, if you put it on the Scooter Helmet in, you may not be able to record anything, or you may only be able to hear the engine sound. I decided that it would be better if I could get video.
I installed the front camera on the bottom of the front cowl and the rear camera on the bottom of the rear box.
As a result, the Cable of the rear Camera was not long enough due to its handling.
The EDR α is the same as other Dr-Recorders (I only know about DAYTONA DDR-100 and MiVue M777D), but the bracket is attached with double-sided tape, but the others are not Material:The good thing is that unlike the Plastic Bracket, the Camera Bracket that comes with the camera from the beginning is made of Gold.
Since it belongs to the Gold family, you can use Pliers, etc. to create angles and curves on the glued surface of the bracket, so you can attach the camera to not only flat surfaces, but also to the folds of the cowl, etc.
I don't know about the valley-fold part, but I was actually able to mount the Camera on the front cowl at the center of the vehicle.
It is also good to be able to check Camera images on the phone app, but unfortunately this app is not compatible with iPod touch, although it is compatible with iPad.
View detail
As a matter of fact.
The tank cover is floating a little too much.
I bought it to physically hold it down (laughs).
Just the front part of the Cap.
But if I'm going to buy one, I'd prefer a Ram Mount product (laughs).
You can mount it in many ways. It's very promising.
In. I think.
Small size is marked for Honda.
It's definitely Large Size.
I don't know why it's happening, but...
Considering the size of the tank cap.
I know it's obvious.
That's the trap (laughs).
So. Of course it's not the M5 cap bolt.
I use the M6 and M4.
And if it's M6, you might want to widen the hole a bit.
That part of it is strange.
View detail
Purchase Repeat
I have been using it on my Ninja 1000 and found it to be sturdy and stable, so I decided to install it on my CUB as well.
Since the Meter visor with Bracket has already been installed on the CUB, the Quantity visor is installed on the Bracket part of the CUB.:Set
The U-shaped clamp came with two sizes, Large and Small, but the Small one was just right.
Quantity of all Arm and Mount (sold separately):When set, it is a little too large and tough for the CUB, but you can drive without worrying about it coming off!
Impressions of the Ram Mount purchase & darr;
https://imp.webike.net/article/453185/
Meter visor is this! ↓
https://www.webike.net/sd/24105239/
Meter visor imprints & darr;
https://imp.webike.net/article/505612/
View detail