Reviews
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
cc110 smart phone device
It is integrated with the windshield.
Good safety features as it is in an easy-to-see position.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
KIJIMA Handlebar Mount Bracke
I can use a small space efficienctly. I modified the Rixen Kaul adapter, combined it, and put on some kind of bicycle handle bag. View detail
Good to use with Windshield.
[How is it used?
SUPER CUB110 has a Handlebar covered by a Cover, so a Smartphone Holderretc. cannot be attached as it is, so it is used to make a place for the Handlebar.
(I guess you could put it on Mirror if you don't use Windshield)
Was the one you received as per Image?
The color and texture are as per Image. I thought it was quite heavy, but it is better than chubby.
Was the installation difficult?
Before installation, it was necessary to remove the body of the WindshieldCUB-F3, which was already attached to the Motorcycle. Also, the four screws originally attached to the Motorcycle were tightened so tightly that it was a little difficult to remove them. I bought my Motorcycle only four months ago, so it might be better.
When I first installed it, there was almost no gap between the lower part of the Windshield and the Shield (see the first photo), and I was worried that if I drove with the Shield in place, there would be contact between the two on bumps and noise would be heard. After changing the position of the Bolt and Bracket of the Shield, I was able to open a gap where there is no contact and there is no noise.
How was your experience with it?
The KaEdia KDR-M28 Smartphone Holder is attached. The thickness of the bar is 22.2mm, and the clamp of KaEdia is 22.0mm (when Attachment is attached), but I was able to attach it.
I used it for about a week and went touring twice during that time, about 2 hours each way, and had no problems with it coming loose.
[Included Parts:were they on?
You need to prepare your own tool to tighten the Hexagon Bolt. I used the one that came with the for Motorcycle portable tool.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Nothing in particular, since I wrote most of it above. If I had to say something, I would say that the price is too high for a Mount Bar Bracket, but I don't want the quality to be lowered, so maybe this is okay.
View detail
Just the right height
I bought this to hold my Driveman in place. The height is just right so the image Angle can be taken well. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Ideal for BOLDOR
CB400SB (2014) Unlike the Handlebar and Handlebar Brace, it is positioned above the Meter, which makes eye movement easier. The texture is firm and the paint job is satisfactory. The only caveat is that the Cowl mirror must be removed before installing the monitor. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000R, HONDA CBR1000R
For Attachment installation
I installed it for a phone mount and USB power supply.
I have no complaints about the Size feel or shape, but the texture of the product was a bit cheesier than I had expected.
The SC77 has a beautiful OEM handlebar area, so it is a little disappointing that it is hidden from view.
Considering the price, it is totally acceptable, and the purpose itself is accomplished, so I would give it 4 stars overall.
View detail
Excellent functionality, but seems to have a problem with mounting strength
Items that can reduce vibration Damage to Smartphone with Suspension function. I bought this product because it is highly rated by many users. The Suspension function seems to work well, and I think it is a sufficient vibration countermeasure. The problem is that the clamping part is loose against the handlebar, and even after using all the included rubber, it was still not enough. By the way, I used a CT125. I was able to clamp the handlebar by wrapping 3 more layers of Vinyl Tape around the supplied rubber. But this time, when I clamped it, it twisted in the right direction which is the torque direction...
I would like to see them sold with a spec. that is a little closer to just size for the Handlebar Pipe diameter.
View detail
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
Easy installation
It took less than 10 minutes to install. The texture matches the vehicle and does not look out of place.
I installed the Phone Holder and drove with the phone attached and had no problems with no Wobble.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
SmallEngine Displacement VolumeParts that are helpful for cars!
[How is it used?
I bought it because there was no Space for Handlebar in the additional Meteretc. and it was difficult to install ActionCamera.
Was the one you received as per Image?
Although it is called "Small size", it looks like a large size for CD50.
Was the installation difficult?
Installation can be done with a single bolt.
I installed it on a MeterAdapter.
How was your experience with it?
I think it looks lumpy, but you can't beat the convenience.
The range during touring has been expanded.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
Steel, so Wound will be noticeable.
It is inexpensive Parts, but it would have been nice if it had a more luxurious feel.
▼Various sizes are available in the Lineup, which is very nice because it can be used for different purposes.
View detail
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
Mount bar with a large range of motion
[How is it used?
USB charging, for mobile Holder installation
Was the one you received as per Image?
Exactly the same as the photo shown
Was the installation difficult?
The installation itself is not difficult, assuming that there is a hole in the CenterPost of the Top Bridge.
Also note the hole diameter.
By tightening the screw, the Ring expands in the CenterPost and is fixed in place.
It tries to move somewhat even when it is fully tightened. This is unfortunate. However, it is a playful part like BacCrash.
Screw Lock (medium strength) must be used for the screw part.
How was your experience with it?
Very stable and very easy to use due to the wide range of motion.
No vibration, etc. is produced.
Pipe thickness is also common, making it highly Universal.
It depends on what you are going to install, if you are going to install a portable Holder, USB power supply,
I think 100mm is too short.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
CenterPost holes are not well fixed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Very happy rider
I got this to mount Ottocast C5 carplay screen. Space is great so you can mount other things. Instructions were ok and had to spend sometime assembling. View detail
Fits: HONDA NC750X, HONDA NC750X DCT, HONDA NC750X TypeLD, HONDA NC750X, HONDA NC750X, HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X TypeLD, HONDA NC750X TypeLD DCT, HONDA NC750X TypeLD DCT
For smartphones!
I have seen many NC750X riders installing this screen mount bar. Most of them are using it for their smartphone, so I joined them. The work is quick and easy, and it takes more time to think about where to mount the phone. lol If you are using a smartphone vertically, a large type screen may be more suitable than a normal screen. View detail
Change the position of the Quad lock
I like that it is made of Aluminum, looks sturdy and Simple! View detail
Mount bar
Easy to install and nice atmosphere
Not sure if it affects writing.
View detail
Fits: SUZUKI GSX-R1000, HONDA CBR500R, SUZUKI GSX-R1000, HONDA VFR1200F DualClutchTransmission, HONDA VFR1200F DualClutchTransmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-)
For fixing Multi Bar Holder
[How is it used?
I purchased a Multi Bar Holder for Touring to secure it to the Stem Mount.
TZr250R (3XV) I wondered if I should use another SizeSmallest one, but I found a blog where this one was installed, so I decided to use it as a reference.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
I think another SizeSmaller one would be better for TZr250R.
Since the vehicle is old, the inside of the stem is uneven due to rust, so it does not go in easily.
Finally, this product was scraped off with a sandpaper and then lightly tapped in with a plahan.
How was your experience with it?
It is perfect for use with the Multi Bar Holder.
There is no sign of loosening at all, and it is firmly fixed.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I thought it would be nice if Bolt was Black as it is not a particularly treated item.
【Review】
Essential items for fixing the Multi Bar Holder to the Stem.
It is inexpensive and good for a variety of vehicles.
However, as mentioned above, I think that for the TZr250R, it is better to use a size up to φ17mm.
View detail
HONDA LEAD125
The fit is perfect and perfect.
However, I am a little disappointed that Hexagonal Wrench is not included.
Those who do not have it need to prepare it separately.
Also, depending on how the bar is installed, it may be difficult to see the Meter device if it is placed in front of the bar, which may cause some inconvenience.
However, Smartphone HolderQuantity:Pair (for Left and Right) I am satisfied that there is quite a bit of room even when fixed at both ends.
I'm glad I bought it!
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I am glad I bought it. It is long and can be installed in many ways.
[How is it used?
I installed this on a 2019 NMAX 155.
I have a small Mirror mount that I had on my motorcycle in the past, but I was interested in purchasing this product after seeing other motorcycles with this product installed.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to remove and install OEMMirror.
The Instruction Manual is also minimal, but I could work by feel without looking at it.
After installing it, I thought that the bar comes surprisingly close to the front.
How was your experience with it?
I immediately attached the Smartphone Holder and the wide mounting location makes it very easy to adjust the location.
It is nice to be able to make fine adjustments, such as making it in front of you or shifting it slightly to the side.
Also, even with the Smartphone Holder installed, there is still plenty of room for a USB or HelmetHook.
This depends on the shape of the Smartphone Mount, but the one I have pops out quite far forward, so Navigation is not in view in my normal riding position.
Obviously, you have to move your eyes, so that is the only part that is a little difficult to see.
[Was there anything that disappointed you?
Nothing in particular, but I'm sure it will rust soon after being exposed to rain for a while.
View detail