Reviews
No functional problems, but ….
No functional problems, but the paint started cracking and peeling about a year after installation. There is a problem with the quality of the paint or the painting method. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Processing is necessary for installation
The bolt that came with the kit did not fit the screw holes, so I extended the holes in the bracket with a drill to M7, but could not install the bolt.
I installed it with an OEM bolt and it fits the screw hole. (I think the upper side of the OEMBolt was thicker, so it fit better and had a Screw hole.)
I put it at 2 because it needed processing even though it was an exclusive product.
2019 CB400SB (2BL-NC42) is
View detail
It's fine …
It's fine, but …I think it's going to have a Daytona Attachment Bar on the BURGMAN 200.
I have the impression that it is very expensive, and I regret that I should have bought the cheaper Universal.
The product itself is solid, so it's not a failure, but I can't shake the feeling that it's not quite right.
I think you can wait until the Other Brand Product comes out, or you can use the Universal Product that attaches to one of the Mirrors. Not recommended.
View detail
Fits: KAWASAKI Ninja ZX-6R ABS, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R ABS KRT Edition, KAWASAKI Ninja ZX-6R KRT Edition, KAWASAKI ZX-6R
I didn't use the key side.
Purchased to mount SP CONNECTO's Smartphone Holder.
The key side is not used because the operability of frequently used keys deteriorates significantly.
The paint on the Black is also weak and has partially peeled off due to slippage.
I would like to replace it if there is another option.
View detail
Smartphone Holder Installation
I bought this one for mounting Smartphone Holder.
It was possible to install the handlebar not by attaching it to the handlebar, but by attaching it to the Mirror Fixing Section of the Cowl Bracket.
It seems to be possible to install it in the mounting position and Bracket's orientation to protrude in the front, or in the back, depending on your preference.
The object itself is coated in SteelBlack, so it is a bit heavy, although it would be lighter with MaterialAluminumBlack surface treatment.
Also, it would be better if the included screws, etc., were also integrated in black so that they would not stand out, but we plan to replace the screws with black ones at a later date.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Mmm.
I put it on my current NINJA400, but the angle is not level because it is installed in the mirror hall of Handlebar, and the inside is facing up, so when I install a smartphone or Beeline Moto, the screen is facing outward and I can't see it unless I look into it. The design and color are good, but from a functional standpoint, I'm not happy with it. View detail
Not available
Maybe it's because the OEM and Bolt materials are different
It felt like a bite in the middle
No more torquing
There's a chance it won't come off again
I gave up on it because it is there
Individual differences?
Screw Pitch and members fit
I think there is..
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
You can't use it as is
The dimensions of Mounting Hardware, with the OEM's Long Screen, and The shape does not match
I think Short Screen would be a good choice
I'll try to process it when I have time
View detail
I'm shaking too much
It shakes when this product is installed. Especially for models with vibration, the navigation will shake and shake. when mounted. Especially with models with vibration, the navigation will be shaken even more. It is real. It is wobbling and wobbling .. Hiking .. I bought it. translated by Google Translator View detail
It's broken
It broke after less than a year, and the shaking due to vibration was also large I found out when the piece snapped off
After four Spot welds, I thought it was natural for this to break off, and thanks to that, my phone flew off the whole stick I went
The stick situation is also too light and shakes very well
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, YAMAHA NMAX155, YAMAHA NMAX155
Strength less than Plastic model
I feel uneasy about the moving part of the lid from the beginning of purchase, trying to hold down the root and slowly remove it will not be removed by Solidly.
Pura Quantity of the same thickness as the toothpick with respect to its hardness : It is strange that 2 pc, not to break
Products that make you decide not to buy the DAYTONA product again nor buy it in yourself unless you can guarantee the labor costs.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
It can not be used for Dorareko
Although I was using Stem Mount, I did not want to change the direction every time I cut the Handlebar and changed it to here. There is a terrible blur because the board that supports Mount is thin. Although it can be used except for dorareko, I think that there is a possibility that Nut may bend because of blur, but now I am wearing another company's Bracket. Those of other companies have diverted this because Size of Nut does not match, but there is almost no blurring. View detail
Fits: Others , HONDA PCX160, HONDA PCX125, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CB650R, YAMAHA MT-09, SUZUKI V STROM 1050, SUZUKI V STROM 650
Bolt hole does not fit
By Lever holder, there was a Motorcycle whose Bolt holes do not fit, and that was it for myself.
(Since it is less than 1 mm, you can omit it with File)
However, Color that takes Clearance with Holder did not delicately match and was finally attached with hand-held parts.
You should list the corresponding models..
View detail
Rust comes out
Rust has occurred from the installed position.
Probably, it seems to be from Bracket side
I think that it is a part that interferes with Handlebar Clamp, so I think that it is a part related to life, so I think that it is better not to buy worried one
View detail
Fits: Others , HONDA PCX160, HONDA PCX125, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CB650R, YAMAHA MT-09, SUZUKI V STROM 1050, SUZUKI V STROM 650
Was it awful? - -
I attached it to the Brake side..
However, attached color is not included in the original diameter of the Cap bolt seat diameter. (Flange bolt problem pear if tightening Type)
So, we prepared Washer for Color and Color entering there to prevent the fall into Body..
* When trying to change to Clutch side, hole position does not match ?? (LeverBracket is too close to the SWBox so the center of the hole does not reach?)
If it says about Color, there is a saw eye and finish ... Also feel something ....
Will Color included for Cap bolt be included?. (Small the outer diameter by 1 mm or so)
Conclusion, Universal installation is still thought .... But things are satisfactory.
View detail