Reviews
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Easy to install! Many uses!
Was the one you received as per Image?
As per Image
I own several Motorcycles and have installed them on all of them.
Was the installation difficult?
It's easy
How was your experience with it?
For mounting a camera, a smart phone, etc... It increases the convenience of the Handlebar and its surroundings.
The weight is not a concern. Wind and weight do not affect Handling.
View detail
Standard
The Mount Bracket is a part that could have been included in the OEM.
KIJIMA and DAYTONA are the only two choices available.
The advantage of KIJIMA is that you don't have to worry about loosening because it is welded.
We also chose this one because it seems to have a wider effective mounting range and greater flexibility.
The Bracket itself is heavy and feels quite prone to vibration.
The OEM CRF250Rally had the same vibration.
As with other KIJIMA products, paint and other materials tend to crack (or rust) when tightened with a weak feeling, so this is a point of caution.
KIJIMA is good because it produces products that can scratch this kind of itch well.
View detail
Small pattern and perfect.
I believe it is Stainless Steel, so the gloss, texture and strength are as expected.
A separate purchase of Bolt to Mirror mount was required.
View detail
RIDEA RIDEA Flexible Bracket
Quantity:Pair (for Left and Right) In replacing the Master Cylinder of the Tank, the Bracket of the Tank was replaced with a new Master Cylinder.
I was thinking about it a lot and found this product.
I wanted something a little different and colored at first.
I was thinking of a Dimotiv Flexible Bracket, but the color I want is
It was hard to find one, so I went with this one.
I didn't have a Review or picture of it installed, so I just bought one.
See and confirm the actual product.
It looked good, so I bought another one and installed it.
The installation was left to Shop when the MASTER was replaced.
However, as far as this alone is concerned, the work is not difficult.
But if you think about Tank's position and adjusting the angle accordingly, it's a little bit.
The level of difficulty is expected to increase.
My impression of the installation is that I am quite satisfied.
When I received the product, I thought it was better than I expected.
Quantity:Pair (for Left and Right) I put it on my Bracket and when I look at the whole thing, it fits me very well and honestly better than any other Bracket.
I also feel that the "I" is the best fit for the "I".
I think it is better than what I had in mind for Image.
Minus, or not so minus, the Right Side Meter is a little harder to see.
However, this is compared to OEMs.
Besides, this is the part that will be the same for other Brackets as long as the MASTER and Tank are exchanged.
Of course, there is no such thing as being invisible when riding.
The texture is not cheap and the degree of freedom is quite high, so those who want to be a little particular about it.
is a Recommendation.
View detail
A necessity if you use Navigation on your phone.
The instruction manual was inadequate and I had to think a lot before I could install it.
It is long enough to attach at least 3 different types.
View detail
For OEMMirror
The mirror is secured by co-tightening, but since the hole for the mirror is 8mm, the hole needs to be enlarged by drilling if 10mm mirrors from other brand products are to be attached. View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel300
It seems to hit on some types of cars.
It is likely to hit Tank depending on the type of car.
It would be better to operate in earnest after Fitting.
View detail
If I have trouble with Space, I will put it on.
If I have trouble with Space, I will put it on.
The Handlebar area of the revolver often has trouble with Space, which interferes with Handlebar navigation, so I'm going to solve this problem by adding this to the revolver.
View detail
Mounted face down.
[How is it used?
I use it on my Z900.
We replaced it because the other company's product we had been using was outside of the Screen, which made us uneasy while driving, and it interfered with the Screen when we fixed the phone.
Was the one you received as per Image?
It was just as shown in the Image. I thought it didn't look too cheap.
Was the installation difficult?
The installation itself is easy, but in my case, when I installed it as usual, it still interfered with the Screen itself, so I installed it upside down.
As a result, this was the right choice, and the mounted phone is now easier to see and Smooth to wear.
How was your experience with it?
It has only been running for a short time after installation, but it looks quite good with no blurring.
I will use the same product in the future in case of deterioration or accidental damage.
Attached to the bar itself is a SP Conecto Smartphone Mount and a USB×2.
If you pack it up, you could probably fit at least a WearLOVE LeCamera.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Combined installation with Valter Moto's AxleProtectionAdapter.
I wanted to install Valter Moto's Axle Protection Adapter on my YZF-R6, but the shaft hole diameter was too wide and even after widening the hole, it still didn't meet the diameter of the hole. The slides have a wider range of movement, and the expansion is extended. It is now possible to install the M6 bolt.
I installed it at my own risk because it is not how it is supposed to be used, but at any rate, I am glad that the Parts I purchased did not go to waste.
View detail
I like that you can change the length.
Mirror mount was the right choice because it is difficult to install Bracket around Handlebar.
The height makes it easy to see your phone.
I was concerned about the fixation force because it moved no matter how hard I squeezed it, but it seems to be Large sturdy for normal driving.
bar to theQuantity:Pair (for Left and Right) It would be nice to be able to change the length by moving it to
View detail
No complaints
Compact and easy to install without interfering with driving View detail
After all it is convenient
The installation was easy, just as shown in the picture, and I think it is a convenient item to have. View detail
I was looking for something Compact and Simple.
If you put a Switch on the Handlebar...
The mounting location of the Smartphone Holder is
It was installed in a delicate position.
Look for something less conspicuous.
We arrived at this product.
Very Compact
This in itself is not assertive in a good way.
I just hide behind my phone while driving.
I understand that the Material is hard resin.
Screw holes are reinforced with steel 。
The thickness of the part to be inserted into Mirror is 7 to 8mm, so
The length of Bolt should be noted.
You will need something about 10mm longer.
I found a good one.
View detail
That's enough.
If you only need a Smartphone Holder, this product is suitable for you, not something that straddles the Fork. Torque wrench may be necessary, but only two Rose Screws are needed. View detail
having good feel for quality
Black powder coating, decorative colors, etc., good finish and texture.
Personally, I would have preferred the price over the quality, as the 250SL itself is cheap, and a bit expensive.
According to the Instruction Manual, the top bridge is co-tightened, but in order to reduce the height, it was co-tightened on the handlebar clamp.
When attached to the bottom side, the distance between the Top Bridge and the bar is only about 16mm, so depending on the item, it may be necessary to pass the bar through the Top Bridge beforehand to install it.
Rigidity and fixation are not a problem.
View detail
Fits: その他 , その他 , その他 , その他
Handlebar Post is also included.:I appreciate the Set.
This product also comes with a Handlebar Post.:Set, which is Exactly for Motorcycle with narrow Separate handle and Handlebar area! View detail
After much deliberation, I decided to go with DAYTONA...
We had a hard time deciding which one to go with, but in the end we went with the Multi Bar made by DAYTONA.
The deciding factor was that the DAYTONA-made one has a bar that comes to the front.
The other company's meter is so close to the bar that it might be difficult to see the meter if a Smartphone Holder is attached....
I can't say for sure because I haven't tried the other company's product, but the price is about the same, and I chose the one that I didn't have any concerns about.
View detail
I still need … Smartphone Navigation!
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.
View detail
Smartphone Holder Installation
I bought this one for mounting Smartphone Holder.
It was possible to install the handlebar not by attaching it to the handlebar, but by attaching it to the Mirror Fixing Section of the Cowl Bracket.
It seems to be possible to install it in the mounting position and Bracket's orientation to protrude in the front, or in the back, depending on your preference.
The object itself is coated in SteelBlack, so it is a bit heavy, although it would be lighter with MaterialAluminumBlack surface treatment.
Also, it would be better if the included screws, etc., were also integrated in black so that they would not stand out, but we plan to replace the screws with black ones at a later date.
View detail