Reviews
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Both Tank Bag attachment and Smartphone Holder attachment.
DAYTONA DAYTONA :Smartphone Holder Wide for Motorcycle
To
DAYTONA DAYTONA:Seismic Spacer for VibrationControlDevice Smartphone Holder3
The two are attached at right angles through the
If mounted on the Center of the Handlebar, it would interfere with GIVI's Tank Bag or hide the MeterScreen.
The perfect mounting angle prevents interference with both the GIVITank Bag and y’sGear's Middle Screen.
(GILLES TOOLING GILLES TOOLING:2DGT0215-BK)
Adjustable HandlebarRiser Mount Kit 2DGT
The Handlebar is brought to the front most at the Home center, and the 3mm thick round base of the Home center, Quantity:Pair (for Left and Right) (in high with 3 pieces each)
When going straight ahead, the phone is clearly visible; the ETCIndicator is also visible.
https://www.webike.net/sd/21956322/
https://www.webike.net/sd/24965608/
https://www.webike.net/sd/23218879/
https://www.webike.net/sd/24609240/
View detail
Wide and easy to use
It is wider than OEMOption and has Space for USB, phone and one more thing to attach. Solid construction. View detail
I think about it a lot.
[How is it used?
The shape of the handlebar makes it impossible to attach a camera or cell phone holder, but this product makes it possible to attach a camera or cell phone holder.
Was the one you received as per Image?
I bought one about a year ago and was happy with it, so I bought it again.:Pair (for Left and Right) Mounting on
How was your experience with it?
Purchased this in addition to a previous purchase that I was happy with.
[Points to note]
The photo appears to be made of Gold, but in reality it is Material.:I was worried at first because it is Plastic, but I used it without any problem.
How did it compare to other products?
This product only
View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel300
Additional bar, but it makes you feel at one with your Motorcycle.
When the Smartphone Holder was attached to the Handlebar, the position of the Smartphone Holder was restricted and difficult to see due to its shape, so the Multi Bar was attached.
The black spray paint is safe and matches the texture of the Rebel. The clutch lever is also tightened together with the clutch lever mounting part, which gives it a sense of unity and makes it less clumsy.
I can't find room for Attachment! This is the best first choice if you have no space for attachment!
View detail
It is easy to install.
I put it on to secure the Drink holder and power supply mounting location. View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Mount Kit and Quantity:Buy a Set and pimp it!
Installation is not possible with Single Item purchases.
Mount Kit and Quantity:Set purchase and ponting.
Installation takes only a few minutes and is convenient for multiple uses, including Smartphone Holder and USB.
View detail
This is soooo good.
I think it is a must-have item for Smartphone Holder installation.
I was wondering how to attach a Smartphone Holder to a Motorcycle with Separate handle, so this is a breakthrough.
There are many ways to attach it, but this product caught my eye quickly.
Installation was easy, so I am glad I purchased this one without any problems.
The Smartphone Holder is also in a good position.
View detail
For Navigation
I put it on to use the phone mount.
I am satisfied with the minimum required construction.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Not too expensive.
I purchased this product to attach a Smartphone Holder and USB power supply.
Install together with DAYTONA's Bolt for Stem installation.
It is recommended for those who want to make the Handlebar area more compact, since it is not tall and short in width.
I think USB port×2,Smartphone Holder×1 is the limit of what can be installed.
View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
It is easy to install.
As the Title says, It is easy to install.
Simply insert into the stem shaft and tighten.
The parts themselves are very easy to assemble.
However, there are likely to be individual differences.
Even if the hex on the mount bar side is tightened quite a bit, it rattles a little.
Easy to install and assemble.
Recommended
View detail
As if it were an OEM product.
FORZA required the installation of a Multi Bar because the Handlebar was not exposed.
Initially, we attempted to add an inexpensive Universal-type Multi Bar that would be installed using the Mirror hole.
However, when the Handlebar was turned off, it came in contact with the Screenetc. and was not oriented properly, so we decided to purchase this product.
This product is Exclusive Design and does not violate the design of MotorcycleBody, thus satisfying the Large change.
The price is a bit high, but overall I am satisfied with the Large change.
IMPRESSION DETAILS
0Package
Very careful packaging with SpongeCushion as well.
0 Product quality
No welding or processing problems
Good paint job.
0 Installation
Easy even for amateurs without any problems
◯ Usability
It is good that the location study seems to be well done.
I personally think it's a good position, out of the way.
Processing of 0Cover
Endurance sells a special modified Cover, but I have modified the Body.
The instruction manual includes instructions for processing the body (size of the notch is indicated, etc.), and processing is possible using a nipper, cutter, and sandpaper.
I think it's better to start out small and then cut around the edges.
Because it was cut by Nipper, there is a white mark on the CoverBody, but it is not noticeable and I don't mind it.
Related to 0OthersCustom
ETCAntennas are installed in the Handlebar Center Cover with no problems.
Wiring with DAYTONAUSBCable and ETCAntennasCable attached to Multi Bar.
The product was installed by drilling a hole in the MotorcycleBody (plastic), which is not too difficult to process.
In this case, we took care to drill the smallest possible hole, as drilling too large a hole can cause strength problems.
Recommended Point
The large size and length of the bar is the smallest necessary, and it is a functional product that does not destroy the design of FORZABody.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Refreshing around Handlebar because of Short Type
[How is it used?
Purchased to attach Smartphone Holder in Touring
Was the one you received as per Image?
It's just like the image!
Was the installation difficult?
It's very simple, but requires a product sold separately.
How was your experience with it?
I am glad I went with the Short Type and the Handlebar area is more Refreshing than the one I had on before.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Easy installation, excellent effect, good cost performance, the only bad thing is the appearance?
I purchased and installed the Smartphone Holder and USB power supply.
Installation is completed by removing the Mirror and co-tightening it together with Mirror.
Installation is easy and cosmetic.
However, in theory, the Handlebar will be heavier and therefore less operable.
Refreshing appearance is also reduced.
This product is recommended for those who use Smartphone for city driving and touring.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
For effective use of Stem hole
DAYTONA DAYTONA:78412 Multi Bar Holder Purchased with Stem Clamp.
I purchased this Smartphone Holder to make effective use of the Smartphone Holder with Stem hole.
The installation itself is very easy and takes less than 30 minutes.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Required for fixing Smartphone Holder.
DAYTONA DAYTONA:I purchased this together with the 95444 Mount Kit Multi Bar Holder.
Or rather, it is installed in the Stem hole, so it cannot be installed unless purchased together.
The installation itself is very easy and can be completed in 30 minutes.
I installed the Smartphone Holder and had no problems at all.
View detail
If you want to Refreshing around Handlebar!
I was looking for something good for mirror installation because of the clutter, and I found this product. It is easy to install, and I use it with TaBrett as Navigation, and it does not cover the Meter, so it looks great! View detail
To ride Motorcycle for a day longer!
I really wanted to go a little higher, but Motorcycle these days is Wire, Cableetc.. I had no choice but to reach for this product because I could not extend it. The texture is quite good and the feel is better than I expected. The installation was just as described in the reviews. I think it is better to replace the entire handlebar for parenthesis, but I want to ride my motorcycle for a day longer than to hurt my body with unreasonable posture, so I think it is possible with good cost performance! View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Easy to install! Many uses!
Was the one you received as per Image?
As per Image
I own several Motorcycles and have installed them on all of them.
Was the installation difficult?
It's easy
How was your experience with it?
For mounting a camera, a smart phone, etc... It increases the convenience of the Handlebar and its surroundings.
The weight is not a concern. Wind and weight do not affect Handling.
View detail
Small pattern and perfect.
I believe it is Stainless Steel, so the gloss, texture and strength are as expected.
A separate purchase of Bolt to Mirror mount was required.
View detail