Reviews
Not usable, even COMPRyans in Manufacturer?
First of all, use iPhone for Navigation in Touring, Camera and other corruptions. (Mechanical anti-shake rather old iPhone) of
Purchased this product considering the possibility.
Image was purchased with the intention of being able to use Navigation on the iPhone instead of the Goo GRUMap and other devices.
First of all, as for the product packaging, etc., it is cheap with a Chinese flavor, the inner box with foil stamping but PeLePera, and the outer box is also difficult to understand the product description (This is true for HP as well.)
The quality of the product body is as follows:First of all, two LCD protective films are attached to the body.
The one with the Manufacturer logo is easily recognizable, but there is another one pasted below it.
Also, this QUALITY must be low.
It is very dusty in new condition and looks like a protective film on a smartphone that has been applied in a messy manner.
There are no instructions on how to install anti-theft brackets, etc. The Instruction Manual is almost completely silent, explaining only that you can use it by connecting ACC, Plus, and Earth.
So, what are my impressions of Body's use?
First, the screen size should be measured in advance.
The body size is almost the same as that of the iPhone 14, but like the old LCD Monitor, the bezel portion of the screen is large, so the display portion is much smaller than the body. (Design that feels old-fashioned)
It is also very thick. It is about the thickness of 2.3 cell phones stacked on top of each other, making it very bulky.
And when you use it. First, the Touch panel Response is
It's slow as shit.
It is useless. It's so bad that you can't operate it while driving, but it doesn't make you think about it.
I made the mistake of thinking it was going to be the same as an iPhone that costs about 150,000, but it's soooo bad.
And even if I operate it with my bare hands, it taps on different parts of the board.
Cheesy electronic sounds and Manufacturer logo displayed when powered on
No, you are not such a proud Manufacturer, Small one hour to see if you can't turn it off.
The most discouraging thing about this is that it doesn't connect to my phone very well.
And, due to the radio wave law, the connection cannot be established for 60 seconds after startup.
Now, do you leave your motorcycle in place for 60 seconds after starting the engine each time?
Is your neighborhood Large sturdy?
Or do I leave the Headlight on for 60 seconds without applying Engine?
Is BatteryLarge sturdy?
I contacted the Manufacturer about this.
It's on the website. (W52 indoor /W56 outdoor only; it does not say that it cannot be used for 60 seconds. Are you telling me to check the radio laws myself?)
If you make a W52, you don't have to wait. But it's illegal, so use your own judgment and do something illegal.
Huh, the Manufacturer recommends illegal activities to the User?
I bought it because it was reasonably priced and had just been released.
The website and product descriptions are appropriate. Packaging, quality control, and after sales are all appropriate and pokey.
This is the first time I have purchased from a Manufacturer, but I would not recommend a Manufacturer that is not well-known.
It's been a long time since I've had a chance to make an impression since the sale of the property was successfully finalized.
I wish that one less person would buy this product.
View detail
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
overdraft
I can't talk about it!
The price is right for all the Option products.
If you buy it separately, it's over 100,000. (Polish)
View detail
M’s Global Market M's GlobalMarket For Motorcycle
After purchasing new, I checked the front and rear Camera, up and down, before installation.
With the power on, about in the middle of the Monitor.
Green and Blue or Line was in there and I applied for an exchange.
The response was slow and it took about 2 weeks to get the Monitor to confirm.
Today, we checked the product and found that the LCD Panel was defective.
We will replace the Body and ship it to you.
I was contacted by the company, but the Monitor they sent me has scratches in it.
That sucks. ！！！！
I bought new, didn't I?
View detail
Camera abnormality immediately after opening the package.
After opening the package, I connected the battery and checked the operation, but the Camera error message kept blinking and I could not record. View detail
![Repair and Optional Parts] Spare Microphone, Sticker, Holder, Charging Cable Set for T-DRH-01](https://img.webike-cdn.net/catalogue/images/102849/t-drh-01-acset_TS.jpg)
Double-sided tape is peeling off,
Double-sided tape peeled off due to the weight of the IncomeBody for a long period of time, and the IncomeBody needed countermeasures against falling. View detail
A bit sorry
I tried to install a RAM Mount with this on a 12mm diameter bar.
When I tried to apply it, it was 13mm, so it was loose and turned.
I tried shaving the gap to accommodate 12mm, but no matter how much I tightened it, it still slipped and rotated and could not be fixed.
I tried to put double-sided tape on the Pipe to hold it in place, but the entire Tape kept spinning.
I gave up at this point. I'll think of another use for it; I wish the inside of the Spacer was a soft Material.
View detail
![RUSH RCF [on Sale Around June 2022].](https://img.webike-cdn.net/catalogue/images/103092/RUSH_RCF_slide01_TS.jpg)
Regret buying it.
Buy it and you will regret it. mesh connection unstable
The power supply has been turned off many times, and even after sending it in for repair, there has been no improvement at all.
Stress only
View detail
It interferes with the Fender Eliminator and is unusable.
In the picture it looked like it was attached to a Fender Eliminator on a Z900RS, so I bought it thinking I could attach it without any problem.
However, in reality, as shown in the photo, the angles do not match and there is too much interference, making it unusable.
There are a wide variety of Fender Eliminators for the Z900RS, but mine is an Active product.
Active's Fender Eliminator differs from other Manufacturers in the number angle and the distance between the Lamp and Number.
I think it's because of the proximity. But Active's Fender Eliminator is the most beautiful because there are no weird gaps.
I'm not sure if I should return it.
If you are a Fender Eliminator and the Lamp and License Plate are close to each other, please be careful.
View detail
Don't buy it.
I understand that this is Chinese, but this is definitely not the way to go! I don't even know if it works properly. I don't even know if it's working properly. I don't even know if it's broken or not, and I can't return it because it's already installed, and it sucks. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Not suitable for CB400SB!
I am on NC42Second Type Model (2BL-NC42).
Although there were scattered reviews that said it could not be installed, I bought it because I believed it was compatible with the product.
As a result, it was no good.
Even if you can get to a temporary fixation on one Screw, you can't reach Limit in place on the other side.
The Level is not possible to install unless the Cowl side is bent by force (probably to the point of breaking) or the Bracket side is bent or shaved.
During the trial and error process, the other Screw and Washer were dropped deep inside the body Frame and became missing, so we gave up on the installation.
Since the work was done the day after the new car was purchased, defects such as distortion on the body side are unlikely.
Some reviews say that it could not be installed even on the early NC42 (EBL-NC42), and I think it is not compatible with CB400SB in general.
It says that it is compatible with both KIJIMA and Webike, but was the CB1300 used as the basis for determining compatibility?
I would like to see it properly verified.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB110, HONDA SUPER CUB 50
Silver、Black
The product features are listed as Silver, Black...
All bar parts of the Body are Silver.
The information on the mail order site also says that the karaa is silver.
Normally, I think the bar is also Black. The difference is that the mounting parts are Silver or Black.
View detail
Defective product?
When I extended the Rubber to attach the product I received to my phone, it snapped.
I was totally unused, so I'm Bigly surprised at this result.
Is it due to the aging of the Rubber or the Rubber Material itself?
Anyway, I am sorry.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It's only a millimeter, but it's a millimeter
I can compromise at worst that there is BALI or it is messy looking, but the one I have has a BallSize of 1 inch as shown in the picture. (2.54cm) It is not
It is only 1mm as per Title, but I gave up using it because it is slightly loose whether I squeeze the Arm or not.
I'm sorry
View detail
I can't charge my iPhone13pro
Although it claims to be compatible with iPhone, it does not charge the battery at all. (It becomes unchargable immediately.) If you look into it, iPhones don't support 15w charging. (up to 7, 5w) Pattern. On top of that, the Bolt that fixes the orientation of the phone does not work at all.
I checked and it is Solidly in Screw lock. (Bolt broke when I forced it to move) The battery is not rechargeable after tightening it up with a different Bolt and getting it to stay in place. This is the worst product I have ever used.
KaEdia's iPhone compatible MODEL KDR−M22A is a much better and cheaper product.
View detail
Unavailable. I think I'll throw it away.
I bought it, and when I tried to install it, I couldn't connect the Case to the Clamp. It is not fixed. I can't use it. Should I glue it or tape it? Even if I do that, I have to open the Fastener every time I take out my phone and put it in. It's a hassle. It was a product worth the price.
I will never purchase from this Manufacturer again.
View detail
It's not working
I bought it because I was worried about the phone malfunctioning, but it is obviously too soft and I think it shakes a lot while driving.
In my case, I did not install it because it is located close to the tank and it might shake and hit the tank.
It was too expensive to purchase as it was not usable.
View detail
Disappointment
I used it on my iPhone 11, but after a few dozen kilometers the image stabilizer malfunctioned and was damaged.
Maybe it was a problem with the 11 unit, but it was too fast for any number of reasons, so I will give it one star.
I have been waiting for this product for about 3 months, but just before it was released, Holder and Quantity:I was very disappointed to find out that Set's Compact Type was going to be released.
View detail
The sound quality is beyond anything I could have imagined!
The sound quality was beyond my expectations.
The control button is also large, so it can be operated instantly without mishandling, even while driving.
It was the right decision to replace it with this one.
However, Speaker's One Side broke after one year.
I haven't handled it roughly, of course, and I haven't driven it in the rain, but I wonder if the durability is like this.
View detail
![EDR α Series [Drrorecorder] Driving Recorder For Motorcycles](https://img.webike-cdn.net/catalogue/images/91097/aff_TS.jpg)
Fits: Others
Garbage
WiFI connection does not work properly.
Works properly to begin with. (Recorded) local
...I found out it was broken.
I connected it as per the manual and the battery went up.
Dishonest response when contacted by Support.
Not worth buying.
View detail