Reviews
Purchased with interim implications.
The plastic ones are a bit weakly made, even if they are convincing.
It is difficult to understand the fit between Case and Bracket, and Case flew once. (Fall Prevention Strap is required.)
Don't put too much pressure on it.
Cost is good for both price and work, maybe enough for people who don't have a lot of pressure to run.
View detail
After contacting the distributor
I installed it because of the high ratings on reviews here and there, but it was disappointing.
It's still a Compact, grippy and good looking Holder, but the vibration of the phone when it's running makes it feel like a Quantity:Pair (for Left and Right) to rotate and slant.
I tried it on a sample from a mass merchant to see if there was any difference in quantity:Pair (for Left and Right) It turns into a
I contacted PLOT, the distributor, and I knew that
If you don't have an object in the XGrip, it won't work, but if you have an object in the XGrip, such as a smartphone, it will not work.:Pair (for Left and Right) The answer is that it is the original product spec. that goes around to
What do you think? Do the people who are giving it high marks here and there just not care?
I've never seen a Spec. smartphone holder that rotates and tilts the phone at an angle due to vibration.
I don't think it's possible as a product.
View detail
At first I thought it was a good idea, but then...
It may be individual difference, but the non-slip Silicon of the foundation was not covered firmly, and a part of the bottom aluminum plate was exposed.
It's not a cheap product, and that alone is uncomfortable.
Also, the manufacturer and purchaser were very unresponsive and I ended up using them as is.
On the iPhone 7, if you pinch it with the XGrip, it will interfere with the volume buttons, so the fixing position is limited.
Also a stick that's gripping even when fixed? It is quite wobbly. Even if I try various things, it does not improve.
If this is another individual, I think they sold me a defective product.
I'm disappointed in this product, as it doesn't have a bad reputation.
View detail
It needs a lot of work, but it's a good cosmetic. (I wonder?)
First, I had to cutters to fit the optional Smartphone Holder. In addition, when I used it for several months, Button of Holder release did not work, so I Rose and Grease up. It is necessary to work on various things, but the cosmetic is not bad. View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
You don't look as pretty as your picture.
When I arrived, I was surprised to see that his appearance is different from the photo. It's dirty, to say the least.
It became the appearance of the picture if it was processed by Paper processing for the first time from File hanging and polished by PIKAL.
The problem with this is that the smartphone holder cannot be tightened with a tool even though it has 10mm screw, and even if it is tightened with a finger, the smartphone holder starts to turn by vibration. It will fall off before it is stolen.
The solution is either machining it so that it can be turned with a tool or gluing it in place that won't come off forever. I'm the former.
I recommend it because it makes effective use of the Mirror Hall, which was only blocked up until now.
processing plan
? I'm going to punch a hole in it like I did.
Because the diameter of the root of the screw has become Large, shave 2 sides with File so that the Spanner may enter.
Firmly grab and turn it with ?Pliers. You need to be prepared to get a lot of scratches on the shaft.
? Solidify with high strength screw lock agent
View detail
I used it and it wasn't much.
Quantity:I bought this set because I thought it would be convenient, but it is not a good idea to use it to attach the mobile phone to the body of the Since the part is not fixed, the angle can change easily. I thought it was a bad idea to use it with it on. If it's another type, you can fasten the body and arm part with bolts. If you're going to use it on a Motorcycle or bike, buy the Type sold at RoseRose. Recommendation. View detail
Not available
Maybe it's because the OEM and Bolt materials are different
It felt like a bite in the middle
No more torquing
There's a chance it won't come off again
I gave up on it because it is there
Individual differences?
Screw Pitch and members fit
I think there is..
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
You can't use it as is
The dimensions of Mounting Hardware, with the OEM's Long Screen, and The shape does not match
I think Short Screen would be a good choice
I'll try to process it when I have time
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
Poor product quality!
The first Case I received has some dents and the Bracket has an uneven paint job that makes it hard to get a color on your hand It was
The one I got to replace is better than the first one, but it has minor scratches and it's a product that's being offered as I've never heard of the company called WorldWalk And I think most of the products are of pretty poor quality
I really want a Case with Key! You should think about it, except for those who think it's a good idea
This ShoppingSite webike was very quick to respond and asked for a replacement I did it on the night of the 30th and then received it on the night of the 2nd
I can shop with peace of mind when Support is strong, so I hope you keep up the good work I think so!
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
I think it's something like this
I purchased this to install my phone
I was able to install it without any problems, but the part that attaches to the multi-bar The Center of the PenetratingBolt receiver is confusing! There are such things as
I understand the same color Black, but I can change it
View detail
Did you check the Body for operation?
When I opened the new package and checked the operation, I could not hear any sound from SpeakerOne Side The manufacturer and the store where I bought it were also closed due to GW, so I couldn't do anything I don't have one, but I don't know what I'm buying this for View detail
Easy to use, but the quality is not so good
Crack enters immediately around the Fixing Screw area
Even if it's lightly tightened up, it still vibrates after a day of running? When I got home to check on the Crack at
I bought it again 3 times and it cracked again, so I gave up and Repaired it and am using it
Material or shape should be improved
View detail
It's not ideal
As a product, I don't have any problems with it at all I feel that the product is a bit cumbersome to put on and take off the phone because it does not come off easily The product is stable and in good condition when installed View detail
It's broken
It broke after less than a year, and the shaking due to vibration was also large I found out when the piece snapped off
After four Spot welds, I thought it was natural for this to break off, and thanks to that, my phone flew off the whole stick I went
The stick situation is also too light and shakes very well
View detail
I'm shaking too much
It shakes when this product is installed. Especially for models with vibration, the navigation will shake and shake. when mounted. Especially with models with vibration, the navigation will be shaken even more. It is real. It is wobbling and wobbling .. Hiking .. I bought it. translated by Google Translator View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, YAMAHA NMAX155, YAMAHA NMAX155
Strength less than Plastic model
I feel uneasy about the moving part of the lid from the beginning of purchase, trying to hold down the root and slowly remove it will not be removed by Solidly.
Pura Quantity of the same thickness as the toothpick with respect to its hardness : It is strange that 2 pc, not to break
Products that make you decide not to buy the DAYTONA product again nor buy it in yourself unless you can guarantee the labor costs.
View detail
I'm considering buying a different Doreco
Added to SecondMotorcycle.
I am using Niriddora 1 at FirstMotorcycle and the picture at the time of confirmation is Small, but it records the surrounding images, the running data by GPS, and the sound, so it's better than not having anything on it, Niridora I tried to attach 1, but since Niriddora 2 was released by MODEL change, I attached two persons.
good point
The image at confirmation became Large.
A bad point
Frequently it does not turn on.
GPS sensitivity is very bad.
Compared to Niridora 1, Body became the first time in Small, but when inserting the cord, the Connector part pops out and eventually takes the installation space.
Body is non waterproof.
General review
As a DriveRecorder, it is fatal, when it is noticed, there are many cases where the power supply is dropped, and it is worried whether it records at the time of emergency.
Even if you contact Manufacturer "Please format SDCard" And the poor sensitivity of GPS "It's less sensitive than Niridora 1" And.
Regrettable though things are sorry for Manufacturer's response.
Nilidora 1 is better because malfunction is less.
View detail
For price ...
Before and after Waterproof 2 Camera, constantly recording formula.
Previously, as there were few models that fulfilled this condition, I was able to use Sokosoko using Nirildra's initial MODEL
I bought Niriddora without hesitation, but I am worsening. What's more, the data of the front and back 2 Camera is File 1 pc. So I can open it with Windows Media Player, but it is only before or behind by File.
I am also using Dora Ray of 10,000 yen at the time of simultaneous recording before and after CHINA, but its usability is better.
For exclusive Soft, it is possible to play back and forth at the same time, but it can only be played partly on uninstalled PC. In Manufacturer's Homepage "Tool to assert self-validity" Although it is stated, notebook PC is indispensable as it becomes an assertion bringing in a PC that contains Soft. I asked about this matter by e-mail, but it's automatic reply "Reception completed" There is no tone even after one week from e-mail. The support system is also a doubt.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
It can not be used for Dorareko
Although I was using Stem Mount, I did not want to change the direction every time I cut the Handlebar and changed it to here. There is a terrible blur because the board that supports Mount is thin. Although it can be used except for dorareko, I think that there is a possibility that Nut may bend because of blur, but now I am wearing another company's Bracket. Those of other companies have diverted this because Size of Nut does not match, but there is almost no blurring. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
I also broke up..
I purchased it again because I purchased it before but it used 3 months not to use It was hung from the center just like before. I think that vibration countermeasure is insufficient rather than tightening Torque is it? Although I want to put in Objection this time, I think that there is no choice but to give up if there is a defect in the product. This item is not recommended. View detail