Reviews
I lost it, so...
22.I lost my ClampSpacer for 2mm, so I bought Repair Parts.
Only Repair Parts can be purchased for fragile parts, so they can be used for a long time.
View detail
Touch screen is slow to respond. Instruction Manual is too easy.
The instruction manual only describes it roughly, so you have to learn how to use it by hand. Except for disassembling the bike, wiring is not difficult with color-coded connectors. However, since the connectors for the front and rear cameras are the same color, it is recommended to temporarily turn on the power in the middle of the installation (since the rear camera has a reversing function). If you are concerned about the dark current, the instructions say to connect both ACC and constant power to ACC, but I connected ACC and constant separately because I was concerned about the inability to use the parking monitoring function and the time gap. If you use your motorcycle infrequently and are concerned about battery drain, it is better to use only the ACC connection for constant and ACC. As mentioned in the title, the response of the touch screen is sluggish. It is frustrating with gloves on. There is no automatic screen illumination adjustment (I always use max except at night). The smartphone app is supposed to be able to connect to the driver's recorder, but I don't know the password, so I still can't use it. The home button on the map screen is annoying. View detail
It's not durable.
When I bought a new motorcycle, the YAMAHAMotorcycle Cover I was using before was no longer available in terms of size, so I bought it instead.
It was quite good in terms of rain protection, but after a year of use with Blue empty parking, the surface coating was peeling to shreds and the fabric was ripped in places.
I think the product is supposed to be used outside due to its characteristics, so I would like it to withstand at least twice as much.
View detail
No functional problems, but ….
No functional problems, but the paint started cracking and peeling about a year after installation. There is a problem with the quality of the paint or the painting method. View detail
It slips and moves.
Used to attach the Smartphone Holder to the Pipe behind the Screen on the Honda 400X (2019) (with an additional Spacer that comes with the Smartphone Holder).
The size itself is just right, but the hard rubber makes it slippery, and even when the bolt is tightly tightened, it slips and moves. Therefore, I wrapped a thin double-sided tape around the pipe on the body side before installing the bolt, but it is not completely fixed because the outer side of the bolt also slides.
I'm considering replacing the Arm of the Holder with an aluminum spacer only for the type that is tightened with ZETA Bolt.
View detail
Higher height.
I bought this when the Autofocus on my previous iPhone 11Pro Camera broke.
Type VibrationControlDevice to be attached to existing Smartphone Holder3
Just Smartphone Holder3+ IH2100Rigid (25077) The pull-pull mechanism is about 20mm higher than that of the "M" and it shakes more when a smartphone is attached.
I think it can absorb a certain amount of vibration, but the increased height makes it look bad.
If I were to purchase an expensive SMARTMonitoretc. without a phone attached, I would be willing to purchase a used Android phone and use it with TetherRing.
View detail
Unexpectedly cheap
The face is large, the design of the letters is good, and the brand logo is not bad looking. However, it is only when you hold the actual product in your hand that you will understand. "Chutzpah." The resin band is like a thick rubber. The resin band is like a thick rubber, and the gold sound is like a toy bell, perhaps because the quality of the band's bracket is low and too light. I think I can understand why the used ones were sold at a low price on the flea market site. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-R1100, SUZUKI GSF1200, SUZUKI GSX-R1100, SUZUKI B-KING, SUZUKI GSX1400, YAMAHA YZF-R25, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
It was impossible to install on CF4EA without modification
I installed it on a CF4EA, but it interfered with the WireGuide that unlocks the Seat and could not be installed without modification.
We responded by sanding the interfering parts.
View detail
Fits: YAMAHA ZEAL, YAMAHA TRZ250, YAMAHA SR400, YAMAHA BWS125, YAMAHA R1-Z, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI VanVan200, SUZUKI ST250, SUZUKI RGV-y250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, KAWASAKI Ninja250R, KAWASAKI Estrella, KAWASAKI BALIUS, KAWASAKI 250TR, HONDA JADE, HONDA HORNET, HONDA NSR250
Dissolves quickly.
I bought it for my 250TR and it melted just by touching the OEMExhaust System.
The fabric feels a bit better than the Daiso Bicycle Cover, very thin and light.
Scooter would work.
It would be good to take it to Touring and use it.
View detail
Commonly usable
I've only used it once, but it works for a change. The air injection type took some time and effort.
In terms of texture, my sleeping posture may not be good, but I had a sore neck the next morning.
Since it is so cheap there, it is not bad from a cosmetic standpoint.
View detail
I want you to write down the Large size of Disc Lock.
The wire lock works normally, but the disc lock could not be used due to its large size.
REBEL250
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Processing is necessary for installation
The bolt that came with the kit did not fit the screw holes, so I extended the holes in the bracket with a drill to M7, but could not install the bolt.
I installed it with an OEM bolt and it fits the screw hole. (I think the upper side of the OEMBolt was thicker, so it fit better and had a Screw hole.)
I put it at 2 because it needed processing even though it was an exclusive product.
2019 CB400SB (2BL-NC42) is
View detail
Not so good.
I replaced it from DRC, but unfortunately it was unstable and unusable on my Machine.
Instruction Manual is also difficult to understand whether the description of the product is slightly different from the actual product.
With dr-z400sm, it is too heavy and difficult to Lift up.
In this price range, DRC comes with Damper, and I don't think it is of particularly good quality.
I expected "Made in Japan" but it is ha Gap.
View detail
Installation is a pain in the ass
The bag does not come with an Adapter to attach to Easy Lock, so you have to attach it yourself. Moreover, there is not even a hole for processing, and you have to drill a hole by Drilletc. before installing it. It is extremely unfriendly. The price is also high. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
A little difficult to use.
Used on MF17 with FORZABOX. There is no problem with the dimensions, but there is only one place on the back side to squeeze the hem strap, so it is difficult to squeeze the hem as desired. The other manufacturer (company name withheld) that I used to use on other motorcycles was very easy to use because it had both front and rear hem apertures. I bought this one because that manufacturer was expensive, but after about the fifth time I used it, the place where the string comes out was torn because I pulled it too much, so I ended up replacing it. It is too good to throw it away, so I will keep it for two sheets in case of stormy weather. I'm going to give up on it. View detail
Quality is not bad, but expensive.
The quality and texture are fine, but there is not enough room for the lighter and other camping gear.
"Multi" I'd like to put a little more in since it's a Case….
And most of all, it is too expensive at any price! It's a shame because the quality is good.
View detail
RearCarrierQuantity:Pair (for Left and Right) The bracket does not align with the base mounting holes on the top case.
I purchased this product to install GIVI's Mono-lock case 47 on my F900XR. I would like to comment on the installation process and the state of use.
(1) RearCarrier's Bracket is LeftOnly Right and Quantity:Pair (for Left and Right) Since there is no Bracket to link the Quantity:Pair (for Left and Right) There is some difficulty in determining the horizontal state of the Bracket.
The ?Instruction Manual is somewhat confusing.Quantity:Pair (for Left and Right) It would be good if the distinction between Bracket and the reverse side is clearly indicated.
(3) Base plate hole and quantity on the bottom of Top case:Pair (for Left and Right) Bracket holes are FrontQuantity:Pair (for Left and Right) Two of them fit, but not the Rear. However, the Rear hole was not inserted, and since the Bolt hole was shifted from the normal position, I am not sure about its strength.
Also, the position cannot be adjusted back and forth.
?There are no strength or other problems so far in using Top case, but the position of Top case is quite high.
I would like to see the Bracket extending to the rear of the vehicle reshaped so that it is lower. Also, the Top case is slightly further rearward than the rear wheels.
View detail
PC application compatibility complaint
I used to use CHINA.
There were a lot of glitches.
I am replacing it with Mistuba Sankowa product.
I am satisfied with the product, but
Data import to PC application is unsatisfactory.
About half of the data recorded on the SDCard cannot be imported.
I have contacted Manufacturer, but there has been no response, so I am dissatisfied.
View detail
It's hard to close.
If the handle is not intentionally hooked inward when closing, it may not be properly tightened and locked.
Quantity Lever to occupy the lid:It is often frustrating because it often doesn't Set and lock instantly.
The capacity is sufficient to hold a full face in Size XL and +α to hold other things.
View detail