Reviews
Fits: HONDA APE 50, HONDA APE 100
Purchased with waist up
Purchased with the above-the-waist version.
TappetWrench, which is used to adjust Tappet, was purchased at the same time.
View detail
Fits: HONDA APE 50, HONDA APE 100
Purchased to understand how Vertical TypeEngine works, etc.
The APE I bought 20 years ago stopped running and I had the compression measured at the shop and it was below the standard value so I bought it to replace the cylinder and piston.
Twenty years ago, I built the Bore Up Kit myself, and now my oldest son will build the Bore Up Kit.
As simultaneous purchases, I also purchased the below-the-waist version and TappetWrench.
View detail
Fits: HONDA LITTLE CUB, HONDA MONKEY
A practical introduction to understanding the basics of 4-Stroke EngineCrank
Crank for 4-Stroke Engine (Under the waist) Purchased for basic understanding of maintenance. it is for MONKEY/SUPER CUB Horizontal TypeEngine, but the basic structure of 4-stroke EngineCrank is the same, so where does it go? What is the basic structure of 4-stroke EngineCrank, where is it necessary to insert oil, what is the procedure, what are the precautions? What is the procedure, what are the precautions, etc.? It is a good textbook to learn from practical basics, with explanations of detailed vital points and easy-to-understand pictures. I think it is a good book to learn from the practical basics, and from here, it is also good to actuallyose and maintain the engine and crank, and then move on to older cars such as 400cc and up. There are some specialized books on crank mechanism, but this book is an introductory book that you should read through because it starts from the basics. View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY
Practical Basics of 4-Stroke Engine Overhaul
4-Stroke Engine (above waist) Purchased for basic understanding of disassembly, assembly, and maintenance of MONKEY/SUPER CUB Horizontal TypeEngine, but the basic structure of 4-stroke engine is the same. Where do you need to oil, what are the precautions? You can understand what the procedure is. It is a good textbook for learning practical basics. From here, I think it would be good to actually start with the actual maintenance of the engine and crank, and then move on to older cars such as 400cc and up. There are some specialized books on engine mechanisms, but this is an introductory book that you should read through because you can learn from the basics. I think it is inexpensive at 900 yen per book. View detail
Difficult to install
First of all, the quality and design of the product are very good.
However, you have to remove the Honda emblem from the original key and reattach it, but it is not easy to remove the original emblem.
And the biggest problem is that you have to remove the black plastic from the original key cluster and install it. This process requires very powerful tools and forces.
I would not recommend it for purchase -------------------------------------------- -------------- First, the quality or design of the product is very good. However, the Honda emblem must be removed from the pure key part, but it is not easy to remove the genuine M Blum. And the biggest problem is to remove and mount the black plastics of the genuine key. In this process, very powerful tools and power are required. I don't want to recommend it for purchase Powered by Google Translator
View detail
Jc92 grom kitaco billet key
Kitaco billet key cover installed on my 2023 honda grom. Had to burn the plastic off the oem key for it to fit. Fitment was perfect, no wiggle room after billet key cover installed View detail
custom key
I thought it was long when I saw it in the picture, but it's really good when I actually received it. The finish and quality are good, and I also really like the way the connection and materials are made. It's a little disappointing that tools are not included. But even taking that into account, it's really good. Recommended if you want to create a special key. -------------------------------------------------- -------- From the picture, it was a long-awaited family, but it was really good to receive it. The finish and quality are fine, and I like the combination and materials very much. But it's a bit unfortunate that the tool is not included. But it is really good considering it. Recommended if you want to make a special key. Powered by Google Translator View detail
Ultra robot arm lockTDZ-09
the best part
It looks rugged and seems indestructible.
Rock Shaft Sponge kindly.
What's on my mind
As I said, it's heavy. (It's a good place, though.) 。
The key hole is bare, I wanted it to have a lid.
Does not bend freely like a wire lock (We need to check the direction of bending) 。
Personally, I wish the length was about 500mm longer.
The durability of the Cover is yet to be determined.
View detail
Ideal for pc20.
Colored and installed.
If it breaks, I can buy it again at a price I can afford.
I do not expect it to be durable.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA SUPER CUBC125, HONDA PCX125-E:HEV, HONDA ADV160
The price is ・・・・
Frankly, I think the price is tough for this product. View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY
It is important to be reliable as a source.
I bought Horizontal Type because I had never assembled it before.
Since the assembly of the Engine itself does not have many special processes to begin with, there is no particular problem without this book.
Just Valve clearance, adjustment procedures, etc. Can the source of the information be trusted?" This is a good book to dispel concerns about
The information on this site is the kind of information that you can find on the Net, but in the end, the information on the Net is not a reliable source, and even if the information is correct, it is not a reliable source. I don't know if that was a good idea. It is Stress there to continue to have the anxiety of
If you don't want to have such Stress, you should buy this book.
Also, if you touch it while building the engine, it will get dirty, so I think it is better to copy the part you use and use it.
View detail
KITACO is heavy
The best. It feels secure. But it's too much fun and Wallet is too light. View detail
protect my calipers
My motorcycle is a brembo brake caliper. There have been a lot of thefts of the caliper recently. The caliper is usually only fixed with 2-3 screws, which is very easy to be stolen, so I bought this set of KITACO anti-theft screws on webike. This set of screws is for Developed to prevent theft of premium parts. It is used by replacing the mounting bolts and nuts of the part and cannot be handled with general tools or pliers. Various sizes are available to meet different application needs. -------------------------------------------------- -------- My motorcycle is a Brembo brake caliper. Recently, there are many things that have been stealing caliper. Generally, the calipers are only 2-3 screw fixing and it is very easy to be theft. Therefore, I bought this Kitaco anti-theft screw on Webike. Prevent high -quality parts from being stolen. It is used by replacing the installation bolts and nuts of the parts, and it cannot be treated with general tools or pliers. Products of various sizes can meet different application needs. Powered by Google Translator View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY
It's better to have it.
[How is it used?
For CUB Clutch replacement
Was the one you received as per Image?
Yes
How was your experience with it?
Various Horizontal TypeEngine Patterns are written.
If you have a MONKEY or CUB, you should always have it with you!
It is useful for engine overhaul and bore up.
Cheaper and easier to understand than poor service manuals
much better
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB110, HONDA SUPER CUB 50
Silver、Black
The product features are listed as Silver, Black...
All bar parts of the Body are Silver.
The information on the mail order site also says that the karaa is silver.
Normally, I think the bar is also Black. The difference is that the mounting parts are Silver or Black.
View detail
![[K・TOUR] Multipurpose Bar](https://img.webike-cdn.net/catalogue/images/105466/80-638-14560_1_TS.jpg)
It is easy to install.
I put it on to secure the Drink holder and power supply mounting location. View detail
Kitaco Billet Key Cover for OEM Key
Kitaco Key Cover is made of machined aluminum with an anodized aluminum finish of your choice. The selection for our order was Red and it looks vibrant with no damage or blemish to the finish. Installation was simple but required some effort to get the key blank down to fit the shell. The keys we have here in the US are coated in thick plastic/rubber so you must take a razor blade, grinding wheel or something sharp to cut along the wide edges of the key until you see the blank below the hard plastic coating. Cut or shave along both sides until you can open the key coating like a clam. There is a hole in the center of the key where the plastic has to be broken so when you open the oem shell you will feel resistance and hear an audiable 'pop' or 'snap' when you remove the coating in completion. ***It is important to note that you have to be cautious when removing the tiny honda logos from your key, which should be done BEFORE exposing the key blank on the inside. Some quick dry adhesive was added to the back of the logos when attaced to the Kitaco Billet Key Cover. This Kitaco key cover is pleasing to the eyes and feels of durablity and long life. Try one in a color of your choosing with your spare or damaged keys! View detail
![[K/TOUR] Drive Recorder Camera Bracket](https://img.webike-cdn.net/catalogue/images/78691/a_1_TS.jpg)
Very good!
Recommendation!
It's more stable than sticking a Camera on the Fender, and it prevents the Number from bending!
The Camera can be installed in 4 different positions, so it will fit any Large car model!
It is a great recommendation for motorcycles that don't have a place to put it!
View detail
It gives a sense of gravity.
I didn't want the Smart key to be scratched if it was left naked, so I bought the one from KITACO, which is now being sold by FOR JAPAN MODEL.
I was able to install it without difficulty, and I am satisfied that I made the right choice in selecting Gun meta, as the anodized peeling was not noticeable.
As I put in the picture, it is a bit of a hassle when replacing the battery.
View detail
It was used for PWK28. Looks and a price are O although it does not understand well efficiently.
It was used for PWK28.
Looks and a price are O although it does not understand well efficiently.
View detail