Reviews
The clutch switch is removed and installed.
I am satisfied with the texture, color and grip.
The Brake Side was easy, but the Clutch Side could not be installed with the OEM clutch switch in place.
I just can't get it to stick with my worksukill.
I thought I had to apply for a conformity warranty because I bought it thinking it would come with it, but I wanted to use it, so I didn't.
I removed the Clutch switch and the Lever was attached, but the Cell only rotates in N.
If the engine stalls in first gear, you cannot hold the clutch and start the engine, so you must put the clutch in N and restart the engine.
Clutch switch for Kawasaki 3-pole, Connector for Cancellation *Spec.
I would like to try this product because I found a product that is inexpensive and could be used to protect the Connector.
Maybe I should have made the Lever a Speedra too, to match the color of the Bar End of the Speedra exactly?
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R
Short Type.
Clutch and Brake lever of CB250ROEM are
Why is it so far away?
I have a rather large palm, but it was still too far away.
I'm super comfy with this thing in place!
It is adjustable in 6 levels, so you can also adjust it for winter gloves.
It can easily be slightly opened with the Dial adjustment.
View detail
Bought by color.
Bought it because it was closest to the OEM color Blue. It is easier to adjust than adjusting Wire because it allows for adjustment. View detail
Fits: HONDA CB400SF, HONDA CB400SF VTEC SpecificationsII, HONDA CB400SF VTEC SpecificationsIII, HONDA CB400SUPER BOLDOR
Aluminum Billet Lever
I bought this to change the color of the Brake and Clutch lever.
I liked the combination of Silver×Green Light and decided on Eukanaya.
I like the design and quality.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA MAXAM
Also fits New ModelTMAX560
I installed it on my 2022New ModelTMAX560 and it fits perfectly. The GP Type is a little bit shorter than the Touring Type, so I thought I should have chosen the Touring Type, but I am satisfied. View detail
Fits: HUSQVARNA SVARTPILEN250, HUSQVARNA SVARTPILEN125, HUSQVARNA SVARTPILEN401, HUSQVARNA VITPILEN401
Lever with high texture
The packaging is secure and reliable.
From the moment you open the box and look at it, you can feel the quality of the product.
Installation took some time with Motorcycle's Habit, but was completed without problems.
Adjustment of play is also easy.
Love the color.
Use a Large cutoff to avoid breaking it in a standstill.
View detail
Fits: Others
Makeover.
I had a red adjuster that had been in use for about 5 years and it had faded, but I thought it looked a little childish, so I chose the silver one and it was the right choice. I chose Silver because I thought it would be a little childish, but I was right. The attached socket is thin and can be easily broken if you tighten it too much, so be careful not to overtorque it. View detail
Fits: KAWASAKI Z650, KAWASAKI NINJA650R
High-grade matte finish and easy operation
The OEM lever of Z650 looked like OEM, so I bought a U-KANAYA lever which has a good reputation. There were several different shapes available, but I decided to go with the Touring shape after testing it at a motorcycle supply store. The replacement took less than an hour, but when turning the nut of the clutch, the wrench did not go in, and it was a little troublesome to remove the switches, but the replacement was completed without incident. The cutout on the LeverReverse side was a little painful for my ring and small fingers when I gripped the Clutch, but it was not that bad. I thought it might hurt a little, but it didn't. It looks fancy and unbalanced in a good sense, and it is a good custom for beginners to tinker with motorcycles, so please try it. View detail
Fits: TRIUMPH StreetTwin, TRIUMPH STREET CUP, TRIUMPH SPEED TWIN 900
The length is …….
I bought it because it looked good on my previous vehicle and on my C125.
I chose the Short Type, which looked good on the C125, but this made it a bit …… difficult for me to do the Clutch.
Brake is so much better now, so I thought it would be good.
It has been a while since it was installed, but Clutch is getting used to it.
But …Short Type cannot be Recommendation for STREETTWIN.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000
Brake lever side is quite far away.
I installed it on my ninja1000 2019.
In the setting of Brake Side, I wonder if it is an individual difference, but I set the Lever to near the full quantity.:Set
It is quite far away.
It may be hard for those with small hands.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Installed on 2021 CBR600RR
I was concerned about the BALI on the inside of the Lever, but I drive with Gloves on, so it's not a problem.
On the current CBR600RR, when the brake lever adjuster is set to 5 and the left side is fully open, it interferes with the chassis.
Stylish and I'm glad I bought it!
View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA CB650R, HONDA CBR650R
It is always UK-sanRepeat.
I have used many different manufacturer's levers, but UK's products are the most precise and have the best texture by far.
I use it because the touch feeling of Brake etc. is also Linear and very good.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI XANTHUS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX
Wide selection of colors
I purchased this bar end to replace the one I had originally installed. It took a little bit of time to install, but I was able to get it on without any problems. View detail
That's what I'm talking about!
I wanted to change from NORMAL to this product. There are about 4 different types, and there are many color combinations among them, so I was able to choose the one I liked best. The grip is comfortable and the texture is not cheap. (fits with cosmetics) There is no loss in purchase. View detail
Recommendations on Dress-up
There is no problem with NORMAL, but I installed it with a little dress-up.
There is no rattle, the texture is good, and the Grip area feels tighter. It feels a little stiffer than the NORMAL when you grip it, but it doesn't feel nippy all the time.... Well, it's just that when you get stuck in traffic, maybe it will seem tighter. If you are worried about it, it might be safer to choose Long lever or Touring type.
It looks good and is a recommendation for dress-up.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
Is it really for Z1000?
I bought this for my z1000 14 MODEL.
Mounting Pitch is not slightly aligned.
I was forced to put it on, but it turned out to be a cutthroat Breaking!
There is no drag, but it is doubtful that this Level is really for Z1000!
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX530
It is a good product with high quality.
I had used U-KANAYA's ClutchBrake Lever in the past. The handlebar end is also of good quality, and the installation instruction manual was carefully written, so I was able to install it without any problems. I am very satisfied with the product as it seems to have reduced the vibration of the MAX500 Type 3. View detail
Fits: HONDA CBR400R, HONDA CBR400R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
No discrepancies! Perfect compatibility!
Maintenance is all left to the dealer, but I was able to replace the lever by myself without difficulty. I feel no discomfort when I install it, and the compatibility with the motorcycle is perfect. View detail
Fits: Others Touring typeLever
Easy to grip!
I bought a Kanaya Lever Short in the past because I wanted to grip the Clutch lever with all four fingers except the Small finger, and the Brake lever did not need to be a Short.
Quantity there:I told myself that it was a Set product, but it still didn't feel right, so I bought the product in question this time.
The assembly itself is not difficult, but there are some minor parts, so be careful if you are thinking of replacing them!
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155
easy to grasp
The OEM Brake lever position was not quite right for my hand, so I went with Lever with Adjuster.
It's better than OEM because it can be adjusted in 6 steps and my finger is Fit to Lever.
View detail