Reviews
Use with Motorcycle
Purchased for use with DCR in Motorcycle
You will also need a PTT and a speaker microphoneCable.
It can also be used for HandyMicrophone!
View detail
![Repair Lever [VRC/VRE Series]](https://img.webike-cdn.net/catalogue/images/70124/VRC_POWER_TS.jpg)
Replace with Round
It is a replacement for the old Labor. I think the round shape reduces the attack on the fingers when gripping. View detail
![Lever for Repair [for Wire Clutch Holder]](https://img.webike-cdn.net/catalogue/images/70124/GALE_WIRE_TS.jpg)
Replace with Round
This is a replacement from the old TypeLever. View detail
Good
I put it on my 2001 BALIUS. The sound is good. View detail
I think it would look great on the GSX-S 125.
[How is it used?
This Mirror was originally purchased for a CUB and was lying dormant, but was installed on a GSX-S125. I replaced it because it bothered me very much when I was riding.
Was the one you received as per Image?
I think it lives up to its reputation.
Was the installation difficult?
It is a little difficult to loosen the moving parts, but if you take your time, you can get the firmness you like, so Large is strong.
How was your experience with it?
It is an inexpensive product, but it did not distort the mirror surface, so we were able to achieve our goal. I also think it fits GSX-S125. I searched for the product and found several other people who have installed it, so I am sure it is correct.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
As you say, the screws for mounting the mirror surface are prone to rust. If you clean the rust off frequently or replace it with Stainless Steeletc. It is noticeable, so I am concerned about it.
The visibility is a little poor when installed as is on the GSX-S125, so I installed it with the Napoleon OnOff-set Holder 30mm forward. In this condition, I personally have no problem with the visibility.
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA NMAX
Exhaust System with a palpable effect
I had installed JOSHO1 Japanese Government Approved Exhaust System, but it only changed the sound and did not lead to speed.
The exhaust system of the scooter is only the one that the performance doesn't change even if it exchanges it, or the one that the low speed becomes scuffed up by the exhaust system becoming good, but since I could feel the effect by using the product of SP Tadao in WR250R, I bought the exhaust system of CYGNUS Glyphus. I bought CYGNUS Glyphus Exhaust System, too, although it is expensive.
We recommend that the O2 Sensor be removed after the Helmet is removed.
I was wondering about the sound of SP Tadao's Youtube because it sounded SMALL,
After the replacement, the engine sounded good even though it was a recognized exhaust system, which was a pleasant miscalculation.
When I started to run, I obviously Torque up and grinned.
This is very helpful because it involves getting through one traffic light on the way to work.
The drivetrain is a JOSHO1 Pulley, WeightRoller 8g, from OEM.
Since it is a Spec. that rotates the RPMs, I think it would be even better to leave it in NORMAL to experience it further.
We are currently using OPRACING Clutch and Torque Camshaft.
View detail
If you are prepared ・・・・
Exhaust Guard is as the name suggests, but this time we purchased it to reduce damage to the Rear Sets.
I compared various companies' products and decided to go with World Walk's product. The deciding factor was its length of 135mm, which seemed to be heavy and resistant to impact.
In fact, the weight without Bolt is 340g and Firmly.
I like the solid construction, the beauty, and the subtle World Walk logo on the tip. I like the logo of World Walk on the tip of the bolt.
I would like to have a color on the part of the tip that can be replaced.
View detail
I like the wide range of adjustment.
CBR250RR I feel that the rear suspension is moving flexibly and not stiffly even with the recommended setting.
The range of adjustment is wide enough to make it softer.
I like that there is no more Shock from Gap when driving on the highway, which was a concern with the standard suspension.
The rest is Gold and Color.:Yellow will increase satisfaction.
The suspension had to be reassembled by removing not only the cowl and tank, but also the exhaust pipe (Other Brand Product).
Gasket should also be prepared.
View detail
Mounted on a replaced external Handlebar (SWCondor)
After replacing the handlebar, I noticed a slight continuous vibration that had not been there before, and I realized the importance of the weight that is inserted in the OEM bar. The problem was that the ZETA hand guard installed on the bar end had an M8 bolt. As a result, we prepared a 10mm longer bolt and used an M8→M6 conversion joint.
When we ran the actual run, the vibration disappeared, and the effect was outstanding.
View detail
Honda go OEMCustomized parts
I have a CB650R 2021 model with Standard Equipment and no helmet lock, but I think I need it for a short break when touring.
Handle mirror hanging is not a relief.
It can be installed by simply popping it on as shown in the OEMCustomized parts section of Honda go.
View detail
It is expensive and well made.
At any rate, even an amateur installer was able to install it in about an hour.
It looks like it could have come with the product from the beginning, as it is an exclusive product.
The price is good if you buy it together with the dedicated Plate and Box.
View detail
I know it's not allowed to drive on public roads, but lol.
I had no idea that BEET's Racing silencer was available on Webike.
I am wondering what to put on my New ModelGSX1300R HAYABUSA, and I think it is almost all Japanese Vehicle Inspection Correspondence stuff, so it is like changing it or not. So, I keep looking for the It does not correspond to Japanese Vehicle Inspection. but there are not many Manufacturers that only offer Silencer.
One day a friend told me that BEET was offering a racing silencer, so I immediately checked it out, and being attracted by the sound and look, I immediately purchased it on Webike, but the delivery time was about 2-3 months, which I thought was quite long, but I received an e-mail saying it had been shipped in 1.5 months.
I installed it right away
Sounds great
However, Kawasaki users have installed many brand exhaust systems, so I don't think they are very rare.
Anyway, I am satisfied, the sound is good and the Power is there, so I will enjoy it.
Incidentally, the exhaust pipe is from Earls Gear, so the holes in the silencer band do not match the holes in the tandem footpeg, so I had to make my own bracket.
View detail
Beauty, good sound, lightweight, Simple!
Installed on a last model NC40 CB400SF.
Since it is a Slip-on Silencer, replacement is a quick and easy 20 minutes.
Gasket for connection to exhaust pipe is included.
The band and silencer bolt connecting to the exhaust pipe are NORMAL.
The purpose is Sound and looks lol.
It is not for Power purpose, but I don't think there is much change in substance. However, the high RPM extension is powering up in my mood with the change of sound.
I can't comment on the sound or the …, since personal tastes vary, but I personally felt that there was no muddiness or chatter, and that the bass was powerful.
The car is also safe for inspection because it comes with Gas Repo, and since I didn't like the flashy Emblem and coloring, it is refreshing and cool!
Material:Since the Aluminum Emblem is included in the package, it may be possible to choose not to apply it.
The RivetBand that holds both ends of the silencer shell in place has the manufacturer's logo or a subtle logo on it, which is also nice.
View detail
KITACO:High flasher measures for Unbreakable lens
I am posting a Review after about 2 years of implementation.
I introduced this as a countermeasure against high flasher when I change the blinker of KLX125 to unbreakable lens.
It is easy to install and works perfectly.
Note that the harness is a bit longer than the OEM Relay, so the waterproof cover on the body side will not fit properly.
However, if each waterproof cover is wrapped with Self Fuser Tape, it is large and durable.
It has been driven about 5,000 km in 2 years, has been caught in large rainstorms while touring, has been igotting in a vomit muddy Enduro race on a rainy day, etc., etc. Water resistance test of a reasonable strength. (?) I have been through the following and to this day have had no problems.
High flasher is illegal and must be addressed.
This product is an easy one-shot solution, and we recommend it!
View detail
I bought it because it is more affordable than ActionCamera.
I bought it to take beautiful videos when we went out as well as Touring.
I have been interested in ActionCamera for a long time, but I had many concerns about the price and whether I would be able to handle the functions.
When I learned about this flow, the most attractive point was that it could be done on a smartphone.
I am new to this kind of equipment, and my impression is that I need to practice to really be able to use it, but there are tutorial videos for each Situation, so I can do it while imitating them.
Trigger function, recognized even at a distance.
but Motorcycle did not follow due to its speed.
Maybe it was a bad setting.
Stick is also attractive because it stretches and can be used as a tripod.
There is also an app to support the operation.
View detail
Cannot be installed on the EURO5 compatible 2024 TENERE700
The 2024 TENERE 700 could not be fitted.
I am angry when I think of the time I spent working on it, thinking it was something I could install, and the damage to the Frame caused by some overwork.
For those who have already installed the OEM Center Stand, the Bolt cannot be installed unless the Center Stand is removed because the LINK part interferes with the Bolt.
View detail
![Cotton Cargo Pants [Subject to buy together campaign].](https://img.webike-cdn.net/catalogue/images/58619/25_0SYEX-12D_02_TS.jpg)
HondaRidingGEAR Cotton Cargo Pants
I am 171 cm tall, 61-62 cm heavy, and have a 78 cm waist, and I bought the SS size.
The length is about the same as my usual pants (76cm), but this one is about the same without shoes.
I thought it would be perfect if the hem width was just a little wider.
I posted this in the hope that it will be helpful.
View detail
A little bit
It looks slightly better.
I think the choice of GROM letter color is a bit of a Large thing.
View detail
Perfect size for wrs jmca
Im using honda hornet 250 with wrs jmca silencer .Even with hight rev i feel sound too high.Because of country public requlation its prohibited. Simply insert to the outer mouth.This the perfect size for wrs .Made with fully stenless steel along with mount hole.(even no need to fixed with nut and bolt it will go to inside fermly) After fixed sound db reduce while high rpm. Exhaust out mouth i feal little smaller,any way I'm satisfied with product. fast shipping .Thanks for webike recomended for those who loking inner buffel for wrs View detail
Looks good and functional
İ dont know.i think so manufacturing tolerances are no good . In order to get it to spin in a crash or tip-over it needs to be loose so that it spins but then it makes the perch loose and that jiggles and wiggles and makes the whole perch move and subjects that to even more crash damage. Plus it moves when landing from jumps.Despite this, it's a great looking part at a good price, I'll give it another shot. View detail