Reviews
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
Don't leak.
Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS 660, APRILIA RS 660 LIMITED EDITION, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA SHIVER 900, APRILIA TUAREG 660, APRILIA TUONO 125, APRILIA TUONO 660, APRILIA TUONO 660 FACTORY, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
be too much
I would like more room.
Sure, you can get in, but it will be tight-fitting with no room at all.
Recommendation to others is not possible at all.
It's a shame because I had high hopes for it
View detail
Fits: HONDA CBR1000RR-R, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB250R, HONDA CB1300, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1000R , HONDA 400X, HONDA 400X, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR1000RR, HONDA CBR250R, HONDA CBR250R
So bad
I purchased this product because the color seemed to match. The texture and color were good, but unfortunately, the size of the Bolt part was different and could not be installed. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Fits: YAMAHA MT-07, HONDA CBR250R, KAWASAKI GPZ900R, YAMAHA YZF-R25, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA YZF-R3
They're not the same color
I bought this because I thought it was the only way to get the Setting out of MT-07's NORMAL front suspension.
The suspension was originally small and did not absorb impact at all, so using this suspension only made it stiffer.
At some point, I noticed that One Side was missing and ordered the same thing from the Manufacturer.
But the item received was not at all the same color as the original.
Manufacturer is selling this as Gold, but it was so far off the mark that they are now dealing with Objection.
I tried to upload the photos, but for some reason an error prevented me from doing so, so I'm sorry I can't show you the details.
View detail
Fits: HONDA GROM, HONDA CB125R, HONDA VTR250, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA CB300R, HONDA CB150R, HONDA HORNET250, HONDA CBR250RR, HONDA CBR250R, HONDA CB250R, HONDA CB250F, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA CB1300SF
It is too dangerous to use.
Bolt of Footpeg is loose.
Footpeg Plate and Footpeg Connection
Screw Stopper (with screw stopper) The driver is in the car, but it loosens while driving.
The bar itself rotates ROUND and ROUND.
Use is not recommended for people who frequently change the position of their feet.
I've tried three different types of Screw stoppers, including the one that came with it. (after 24 hours of curing) The fact that all of them loosened and almost fell off while running suggests that there may be a structural problem...
Foldable recommends integrated type.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
Weatherability
It is used outdoors
Color from Black to Color with ultraviolet light after one year.:It will change to Gray.
Color:The fabric is so thin when it's grays? The fabric is thin enough to be used for gray, but it tears when it is slightly caught!
Gold amount is also high and should last at least 2 years for outdoor use.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Is it malfunctioning?
Even though the power supply is connected from 5A for YamahaOEMHarnessGrip warmer, it is still slightly warm to the touch with bare hands?
(stopped) is about
Maybe you pulled a HaGap.
I also use YamahaOEM with nmax and DINK with Endurance's Grip heater and it warms up well.
It's rather hot with bare hands.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Small
I purchased this to prevent bending the License Plate by catching clothes or Motorcycle Covers.
This product is simple, sturdy, inexpensive, and good, but the four corners are cut to a large size, so the license plate protrudes.
For this reason, it was not able to meet my requirements and was put in storage.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It's only a millimeter, but it's a millimeter
I can compromise at worst that there is BALI or it is messy looking, but the one I have has a BallSize of 1 inch as shown in the picture. (2.54cm) It is not
It is only 1mm as per Title, but I gave up using it because it is slightly loose whether I squeeze the Arm or not.
I'm sorry
View detail
Fits: HONDA XL250, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBF250 04/05, HONDA CB250F, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XL250
XAM (Formerly a fake AF*M) is badly made.
First of all, BALI is terrible.
Webig's product image shows a hole for the meat removal, but in reality, it is not there.
And some modifications are required for PackageLabel. (Lol)
Well, I don't really care because I'm a Manufacturer who buys without any expectations.
It's not that much different from the more shabby $2,000 kiosks in terms of material.
View detail
It didn't work.
I bought this Reverse Side for my CBR250R (MC41, 2011) at the same time as the pull/return, but this Reverse Side is different from the OEM and does not work.
The screw diameter on the Throttle side is so small that it is completely useless.
Why is this for a CBR250R (MC41)? I have no idea.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
I do not recommend it much
The replacement of the Halogen bulb was very easy and took about 5 minutes to install.
However, when actually illuminated, the light was not evenly distributed, making it sparse and very difficult to see.
In the end, we purchased another company's LED Light (DeltaDirect) and are happy with that one, which is cleaner and very easy to see.
Adapter?-like thing got unusually hot, so I'm a little cautious when placing it behind Headlight.
There was some concern about Harness and whether it would melt.
View detail
Fits: HONDA CB650R, HONDA CBR1000RR, HONDA CBR650R, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja400, Others , YAMAHA MT-09, YAMAHA MT-09TRACER, KAWASAKI Ninja ZX-25R SE, DUCATI Streetfighter V4S, DUCATI Streetfighter V4, YAMAHA XSR900, YAMAHA MT-09 SP, HONDA CBR250R, HONDA CRF250L, HONDA CBR250RR, HONDA CBR1000RR SP, HONDA CB1100 RS, KAWASAKI Ninja ZX-25R SE KRT
StrikerOil Filler Cap Gun meta
Unlike the color of the Gun meta in the picture, it is almost silver and does not match my motorcycle, so I do not have it on.
It's a shame, because it was well made and looked good.
View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
I want to cancel an order, but I don't know how.
I want to cancel an order, but I don't know how.
I don't know where to inquire, so I am writing here, even though it is out of place.
I want to Cancel the order before it is shipped, but I am having trouble doing so.
View detail
Fits: HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA Rebel500, HONDA Rebel250ABS, HONDA Rebel250, HONDA Rebel250 S Edition, HONDA 400X, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Ver R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R
Maybe there's a chemistry.
I replaced OEMPad→Metallica→brembo in that order, and the controllability etc. is fine, but the Brake squeal just before stopping. (Noise Level) The "A" was so unusual that it could not be used for town riding.
In the meantime, I drove about 200 km with Caliper OH, Rotor polishing and Pad chamfering, but there was no improvement, so I went back to Metallica Pad and no problem.
Maybe it was incompatible with the WR250X Rotor, but this brembo pad was a disappointment.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F
Don't buy MC41
Blinker cannot be fixed.
Normal fender not to move up and down.
Mounting holes for fixation are Small size?
This product is
The car is not designed to look up or down after driving.
Needs to be corrected. 。 The blinker side is a rubber mount, so it cannot be completely fixed.
We recommend that you buy one from a different Manufacturer.
View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
I just wish it would last a little longer.
It didn't last two years and started to tear.
It was in a place with direct sunlight, so the environment for use would be harsh.
The fabric began to tear at the crease and ended.
I wanted it to last a little longer.
View detail