Reviews
Way better than rubber rim strip
This makes life so much easier when changing tires. I no longer have to worry about the rim strip moving on me when trying to put the tube in. I like this better than the rubber cover that wears and slides off the spoke ends. You have to clean the rim very well, I use brake cleaner. I change tires a lot and these have been working great. Rubber strips leak, some other strip tapes did not hole up as well. I'll use this again. Worth the extra money.i definetly recommened. View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Light Touch Clutch Kit
It feels much lighter to grip than the NORMAL! I had to take many breaks during long tours due to tendonitis! View detail
Easier to grip
I used to use Emon's Air gauge, but when I put it away, I accidentally closed it without removing the Air gauge and the gauge stuck and would not return to Zero. View detail
Thin, lightweight, compact, easy to carry, and safe to carry
It is thin, lightweight, and very compact when folded, making it a must-have when I go out. It is very useful from spring to fall when the temperature difference is very large, such as when it is cold in the morning but hot during the day, or in summer when you are in a high altitude and the temperature is low, or when you encounter chilly conditions such as fog. In winter, it is good to have one more layer when you don't want to be overdressed but are a little worried about warmth.
It is more of an Emergency product, and if you expect to wear it in the inner room, the texture and design are like this, but the performance is sufficient for your needs.
Actually, I have been using a collarless version called "YKM-212" by Yamashiro before I bought this one. I bought this one because it is more compact when folded up, and this one with a hood seems to have good windproofing properties around the neck.
On the other hand, this model with Hood is designed for outer wear as well.
The Level is not a good place to stay in Parenthesis, but it is not embarrassing to take off your jacket and walk around during a break.
There are many thin, windproof innerwear products of this type, but I think that Yamashiro's silayed Nylon is the thinnest, lightest, softest, and most compact. I think it is the thinnest, lightest, softest and most compact. It is a recommendation for those who want to keep their luggage to a minimum. However, the price of this Hooded bag is a bit expensive. (List price) I would not say that it is a bit cosy.
Sorry WeBig, but if it's the lowest price sold at another Site, the cosmetics are good.
View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Fits: YAMAHA WR155R
WR155R Full Exhaust System Comparison
I have tried three Full Exhaust System, PROLinerXR-1⇒DAYTONA(IndonesiaYamahaOption)⇒Yoshimura cyclone. As for the comparison of the three systems, my personal opinion is that overall they are 1st DAYTONA (IndonesiaYamahaOption), 2nd Yoshimura cyclone and 3rd XR-1. They all have their pros and cons...
XR-1 is really noisy enough to break your ears in Tunnel, and when VVA starts to work, it stalls (Gas is too thin), so it is obvious that Injection controller and fuel condition are necessary. YOSHIMURA's total balance is excellent and he is able to drive on public roads with confidence, and he is able to secure satisfactory torque and power from top to bottom. Lastly, DAYTONA is my favorite with YOSHIMURA's fee ring with higher volume. Also, it is the only one with a baffle, which allows for simple sound deadening, and the exhaust pipe is the longest of the three, which seems to secure the Torque. The difficulty level of installation is the same for all 3 Rings. However, only YOSHIMURA's Fender Eliminator has a blinker that interferes with the pipe, so it needs to be relocated. In addition, the Gasket of the middle pipe is required.
View detail
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
fender eliminator
I received the package in very good condition, both on the outside of the packaging and on the inside, well protected and on the agreed date. The bike takes on a better street style, since with this fender eliminator you can better see the rear rubber View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
steering wheel
This product has a lower weight than the stock steering wheel, which allows for greater motorcycle performance. The park received it in excellent condition, although the packaging was torn as if the piece had been unpacked before, although the product was in excellent condition. View detail
Nice windscreen..completes the look of the new katana
Good looking and proper fitting windscreen For the new katana. I think it looks way better than the small original screen. it even helps a bit at highway speeds Up to 120kmph.or 70mph. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
It looks like it will fit in the stated capacity.
2.The product is up to 5L, but it seemed like a Limit at about 2.3L.
It's in there with no problem, so it's supposed to be in there as described.
It's much easier to dispose of than the previous Dan Ball box was.
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZZR1100 C, KAWASAKI ZX-10, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ1100 , KAWASAKI GPZ1000 RX
Black will not fit without shaving due to the thickness of the surface treatment.
I cleaned up the cist Shaft with Paper but it was too tight to fit, so I had to rub the Bearing Inner Ring with Paperetc. a lot to get it in, although not enough to drop the Plating.
The reason may be the thickness of the plating, since I purchased it in black, but after inserting it into the Shift shaft, it turned smoothly, so it may be due to a slight thickening and deformation of the splined area near the shaft due to processing distortion.
The bearing was also reluctant to move, but after placing it in the shift shaft, it rotated smoothly, so I decided that the bearing would rarely rotate and assembled it as it was.
It would be nice if the price was a little lower.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA DRAG STAR250, YAMAHA MAXAM, YAMAHA SR400
I am satisfied with the design and price.
Installed on SR400Final edition.
I liked the design of the OEM Mirror, but I had trouble with the narrow field of view, the angle of the Mirror was difficult to adjust, and the installation screws were loose, causing the Mirror to rotate downward while driving. After installing this product, the screws no longer come loose and the angle can be adjusted in a wide range of motion, so I have good visibility.
I like the Square Type design, which looks like early SR.
One drawback is that while it is easy to adjust the angle, the angle changes with the weight of the cover, so it needs to be adjusted each time before running.
The price is reasonable and overall satisfaction is high.
View detail
It was just like the image.
I have just purchased a DDR−S100 with KAMUI3 for the purpose of fixing the Wiring to operate it as a HelmetCamera.
My DDR−S100 was modified to be able to cut the cord in the middle and connect it with Waterproof Coupler after the USB cord was disconnected. The third image shows the Helmet side. By connecting the other side of the cord connected to the Mobile Battery to this side, the cord does not get in the way when attaching and detaching the Helmet.
This time, when I use KAMUI3 for motorcycle commuting, I thought it would be better to have a DriveRecorder, so I decided to install DR−S100 on my helmet, and selected this product as just the right one to fix the Power Cord.
This 3mm TubeHolder was not bad looking and had just the right diameter to move it a bit against the thickness of the Wiring.
I have used 5mm diameter ones in the past, but they can also be cut and used, and I think they are quite user-friendly Parts. However, the adhesive strength is not very strong, so you need to be careful where you apply it. If it comes off, I will reapply with a stronger double-sided tape.
View detail
Fits: Others Universal, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA BENLY50, HONDA BENLY50110, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEADEX, HONDA APE 50, HONDA APE 100, HONDA DIOCesta, HONDA XR50 MOTARD, HONDA XR100MOTARD
Exactly to MONKEYGROM
It is Exactly for 125cc Minimoto. It is thick, waterproof, and will not fade. It is quick to hang, and the center clip prevents flapping, even in strong winds.
The holes for locks on the front and back are also well and not frayed.
The black color is inconspicuous at night and plays a role in security.
View detail
It seems to be more durable than OEM.
It was firmer than OEM and seemed more durable.
Since these are completely self-satisfied Parts, there is little need to replace them unless the OEM Mud Guard runs out or something, but I replaced them out of self-satisfaction.
View detail