Reviews
Cospa best
[How is it used?
Helmet hung on Mirror and locked.
Was the one you received as per Image?
Street Image
Was the installation difficult?
In my case, it was a little troublesome because I had to remove the brake lever to install it, but it's easy to install if it's in an easy-to-mount location.
How was your experience with it?
Hang your helmet on Mirror for peace of mind when you leave your motorcycle
[Included Parts:were they on?
No
[Was there anything that disappointed you?
nothing special
With or without Instruction Manual
As an anti-theft measure, the mounting screw is hexagonal, so it can be easily removed with a tool.
View detail
Wrist is tight when putting it on.
I saw in the Review that it is 195mm from wrist to middle finger, so I decided to go with M Size.
It is Exactly if you fit it, but it is narrow when you fit it….
It's fine for OffRace, but for Touring it's a hassle every time.
So I stretched it with a water bottle as shown in the picture! I'm glad I was able to fit it a little easier.
Also, the fabric is quite thin, so it is cold when the temperature is a little low.
I use Soar SpectrumGloves, so I thought they would be the same, but they are totally thin.
Soar is peeling off the Rubber of Protect, but it is firmly attached as expected of Alpinestars!
View detail
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
GB Engine Guard
[How is it used?
24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image?
high
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
OK
[Was there anything that disappointed you?
Oil replacement has become a bit more difficult.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA BENLY50, HONDA CB250R, HONDA CT110 HUNTER CUB, HONDA DAX, HONDA glom, HONDA XELVIS, HONDA Night Hawk, HONDA JADE, HONDA HORNET, HONDA GB250 CLUBMAN, HONDA DREAM, HONDA CL250, HONDA VT400S, HONDA R100 ROADSTER, HONDA GB400, HONDA CB400, HONDA CB400SF, HONDA BROS, YAMAHA RENAISSA, YAMAHA SR250
It's very cost effective.
It is OEMMirror-like enough to be satisfactory for the price.
Plating is clean, mirrors are not distorted, and there is no blurring while driving, so rearward vision is good.
The difference between OEM and Large is that the ROD is shorter (lower) and the black parts that look like shock absorbers are just materials.:It means that it is a Plastic Cover. Of course, there is no way to add a shock absorber at this price, so it makes sense.
Overall, I think this is a good product with high cost performance.
View detail
Helmet and rain gear
I had been using a 26-liter round top case, but I felt that the round shape offered less storage space, so I purchased this 33-liter square top case.
Tour cross3 with Visor will fit enough +α to hold at least rain gear.
It is easy to lock the door without a key, but you have to be careful with the marker.
View detail
ease of use
Very easy to handle. View detail
Although there is a high degree of freedom
The flexibility is high, but the number of mechanisms is large, so it can be a bit of a challenge to install without thinking about it.
Texture was appropriate for the price, and visibility was not much different from OEM.
With a single cylinder, there is a certain amount of vibration.
The hardness of the moving parts can be adjusted by you, giving you peace of mind.
View detail
Very happy with PannierBody.
The OEM design of the vehicle is a good thing, as it matches the body of the vehicle and allows for a much larger load capacity.
I am very satisfied with the one key system and the discreetness of the bracket when it is removed.
However, I am not happy with the Gold amount, as it costs almost 150,000 for Rear Carrier + SupportBracket + PannierBody + Keys all together.
View detail
attachment (Removal before) is difficult, but worth the effort!
Spare parts for N60-6SPORT, a new model of 2024.
Purchased as it can be installed on N60-6.
Was the one you received as per Image?
This is the Spoiler of the image itself.
Was the installation difficult?
It was difficult to remove the existing Spoiler before installation.
[Included Parts:were they on?
No Instruction Manualetc.
[Was there anything that disappointed you?
NO
Points of installation and hang
Removal of existing Spoiler.
As you can see from the RASSpoiler, there are three Hooks.
First, lift and remove the Rear Hook,
Next, remove the top of the head by pulling it backwards,
Finally, remove both SIDES as if you were lowering them.
It all takes a lot of strength. It may not be possible for a girl to do it….
Please refer to the image.
Notes
After installation (Naturally it is) Inside the Spoiler you will find (Spoiler must be removed). unaffordable
Helmet, inside Spoiler should be Beauty.
Also, if you touch the inside side of the Spoiler during installation, fingerprints, etc. will be left behind (laugh).
Items to buy together
Interior removal spatula for 4-wheel (Material:Plastic) might make things easier.
View detail
Windproof effect + does not destroy Style + makes cleaning easier
I have an OEMHigh Windscreen, but when I replaced the Helmet, the Wind Cutting noise became worse.
The wind was now coming from the upper half of the helmet, but if the Adjuster is raised to the Largeest setting, the wind is no longer coming from the helmet at all.
It is easy to install, and if the adjuster is lowered, it hardly disturbs the style.
It was also good to have space between the Screen and Bracket, making it easier to clean.
The disadvantage is that it is not possible to put something like a Screen Mounting Bar Holder between the Screen and Bracket due to the installation, and the price...
View detail
For Day Trip Touring
[How is it used?
I purchased this bag to hold my baggage for a day touring when I took delivery of my Ninja 1000sx.
Was the one you received as per Image?
The Large size and texture were exactly as shown in the Image.
How was your experience with it?
It is about 1/3 capacity with Rain Suit, Touring net, simple tools and small things.
It can be expanded with a fastener, so there is no problem when storing souvenirs, shirts, etc.
The top lid area is glossy Black, so abrasions will be a concern in the future.
[Points to note]
KBelt is convenient, but I am concerned that it will gradually shift forward when driving.
How did it compare to other products?
I used to use Single side bag for my hand luggage, so I have to be careful when I straddle it when I ride.
The drawback is that it is not easy to use, but I like the simple look of the product.
[Installation hang].
The center belt for attaching the KBelt must be tightened firmly when driving.
Note that it will shift forward.
View detail
![[For Kids]SYNCRON CC MXJersey](https://img.webike-cdn.net/catalogue/images/108318/447524_01_TS.jpg)
Purchased for my 3rd grade Small School son.
Was the one you received as per Image?
Coloring was as per Image.
[How did you feel about the Fit?
When worn by a Small School 3rd grader (135cm tall, slender), the sleeves and body length were too long, though,
I think they can be worn for many years even after some growth.
How was your experience with it?
I have purchased ANSWER Jersey before, but it frayed while I was using it.
It was coming out. We hope that will not be the case this time.
[Was there anything that disappointed you?
No problem except that the Size is Large.
How did it compare to other products?
I expect that the sewing and texture is better than FOX's Jersey, so it will not deteriorate over time.
View detail
It was possible to install on VSTROM250SX.
It was possible to install on VSTROM250SX. View detail
Nice touch - but problems for yourself
Installation is a nightmare. You have to remove your whole tail assembly except you subframe. The new undertray comes with battery slot, but misses some of the grooves required to route wire harness. Putting back the tank had challenges. Fitment is ok. View detail
Great rigidity.
The pipe is thicker and has more fixed bolts than the OEM, so it is very rigid.:It comes with a Plastic Slider, so it will be cheaper in case of moss.
However, installation was a challenge. Since it is slightly gapped, I managed to install it by fine-tuning while loosening and temporarily fastening.
I thought it would take an hour to finish and started working on it at 15:00 and finished at 19:00. I think it was an individual difference.
The product is good and I am satisfied with the Large change.
View detail
Pants suitable for summer and lightweight.
I was looking for a cool and lightweight pant that is easy to move in. I like the shape of the hem, too, because I can easily slip them into my OffBoots. I choose "Just fitSize" because I wear my Knee guard on the outside. View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail