![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
Circuit Running
I want to measure lap time in Circuit.
Purchased
I still need to know where to install the Sensor part and Wiring.
It was Large strange to pull it in.
We will verify if Time can actually be picked up properly.
View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
Circuit Running
I bought this for a Circuit run.
As others have written, the Sensor portion of the
I am at a loss to install it.
Installation location, installation bracket, etc. are time-consuming.
It will take
You must be able to tinker with Motorcycle in a certain way.
Installation may be tough.
View detail
![ZiiX TIME ATTACKER](https://img.webike-cdn.net/catalogue/18451/w-1369-001_TS.jpg)
(degree of) satisfaction
Used in Circuit.
It is good to see the Best lap updates in Lamp.
View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
Yoshi Yoshi
I bought this because the Knee Slider that came with my Leather suit was worn out.
I used it at Circuit and it was nice and thick with a smooth sliding feel.
For this price, I would repeat it again.
View detail
![ZiiX TIME ATTACKER](https://img.webike-cdn.net/catalogue/18451/w-1369-001_TS.jpg)
Indicator is good
The Lap time in the Circuit run is determined by the Indicator.
It would be useful to have more clarity due to its existence.
I'm not sure if the laps I just ran were good or bad, but I have a sense of what I'm talking about.
I can judge by the light without, so I can adjust how I run the next lap.
It is useful for
We replaced P-LA● for the above reasons.
It is not easy to improve just by running somehow.
Difficult, unnecessary falls, etc. by using good ITEMS,
I think we can reduce Risk.
View detail
![ZiiX TIME ATTACKER](https://img.webike-cdn.net/catalogue/18451/w-1369-001_TS.jpg)
It works for now, but ….
I repurchased this product because my previous purchase of the same product broke.
As it turns out, the malfunction was probably caused by the midsummer heat. After the malfunction, we rebooted the system, but could not solve the problem.
As a Lap timer for the time being, it may have some Advantage in terms of price, availability, etc., but it may not be a product that can be with us for a long time.
It would be better to use Awning in the summer or take other measures.
I was disappointed because this is a Manufacturer that has provided us with a relatively good product.
View detail
![ZiiX TIME ATTACKER](https://img.webike-cdn.net/catalogue/18451/w-1369-001_TS.jpg)
Failed 1 year and 3 months after purchase.
One year and three months after purchase, after about 10 times of use, a series of errors occurred and measurement became impossible.
I contacted Manufacturer and was told that it could be a Short in the internal infrastructure.
Unfortunately, it broke slightly past the one year warranty period, so we were unable to replace it under warranty.
The price of the Lap timer is not high, but considering that it will break down in a little over a year, I can't say I recommend it.
View detail
![ZiiX Tank Cap (HONDA)](https://img.webike-cdn.net/catalogue/18450/w-1369-740_TS.jpg)
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
The decrease was quite fast.
I used it at Circuit and it reduced 3 times faster than I expected.
It may not be suitable for those who thrash around to the fullest, but there is no Knee Slider that does not decrease, so there is a Cost performance that those who care about it may use it!
View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
COSPA
Anyway, it is a cosmetic product! It was a little bit fast to wear off. View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
No problem, it worked!
It worked fine at Twin link Motegi! View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
Repeat
Repeat Purchase
I appreciate the affordable price.
I will purchase again when it wears out.
View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
Used in Scooter race
Installed on a 4-stroke JOG.
After confirming that the Sensor responds to the magnet, it is brought into the Course, 10 cm above the mounting ground, and there is no response in Tokushima CartLand.
Next time I will ask CourseOwner if there is a magnetic bar and then try to adjust the Sensor position etc.
View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
magnetism
By Circuit
The magnetic strength that can be picked up seems to vary
If there are times when you don't pick it up at all and don't even Start.
Start, but by the time you've done three rounds, you've done three rounds.
You can also try to display a wrap.
Circuit is able to measure and display every lap without any problem.
The fact that it is there means that as long as it can pick up magnetism, it should be fine.
I think it depends on the Setting of the user.
View detail
![HID for Motorcycle CL-CA-H7-6000-BIKE](https://img.webike-cdn.net/catalogue/18450/cl-ca-1_TS.jpg)
Poorly maintained in close proximity:、、、、
Ballast broke down and White by until delivery.
I was so concerned, I was commuting to work on an alleyway.
Thank you for the earlier-than-expected arrival. (_ _) m
View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
Sensor installation is troublesome
[How is it used?
Circuit
Was the one you received as per Image?
Image Street
Was the installation difficult?
I want to remove the sensor when driving on the street, so I need to devise a way to install it.
How was your experience with it?
Sensor installation is troublesome
View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
Thick and dependable.
I use it to practice on Mini bike cart course.
We understand that the brand prioritizes cost, but we have been able to use this product without any particular problems.
They are so thick that my knees rub more than usual on the Mini bike.
I think this is a good choice for people who want to scrape their knees with CircuitEvents for Large type cars.
The scraping sound is high and a bit embarrassing, but some people seem to use this sound as a threat.
I like it as it stands, but I am embarrassed by the Brand logo.
View detail
![Knee Slider](https://img.webike-cdn.net/catalogue/images/9779/aaa_TS.jpg)
That was good!
It's cheap, it's thick, it doesn't wear off, and it's good! View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
It's still better to have it.
The one I used to use before was submerged in water, so I…d better have it so I can see how many seconds I'm lapsing, which will motivate me to keep going. View detail
![ZiiX Lap Timer](https://img.webike-cdn.net/catalogue/18450/laptimer_TS.jpg)
In Lap timer, the Popular
After all, it is difficult to find the Sensor's mounting position.
Use is fine.
Currently, I am using Button batteries, but when inserting the batteries, the lid is incredibly hard, and I was afraid that it would break if I put any more pressure on the claw.
Also, when I bent the BodyBracket, the paint peeled off ParaPara as shown in the photo (lol).
View detail