PLOT Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

PLOT Clear all

PLOT

08 Mar 2023

Proto Brembo Offset Collar 4 Pcs

Japanese Webike user

5/5

For ZX-6R

What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had planned to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found a …Brembo caliper at a discount price, and I almost bought it on impulse. I was going to finish with the Brake line, but I happened to be browsing through Webig and found …Brembo caliper at a low price, so I bought it almost on impulse. PLOTbrembo Offset collar 9mm purchased

[How was the installation?
Before purchasing the Offset collar, I read the description section of the PLOT and found something I didn't understand… Brembo radial caliper is "CaliperA". "CaliperB fits." I have been trying to find out what it means on the Net, but I can't. I called the manufacturer to find out. They said that they could not guarantee the product because they had not confirmed that it was compatible with any other models than the ones listed.
So I checked my ZX-6R. 6ROEMFront Disc is 310mm. I checked the disc and pad contact surface and there was about 1-2mm of space under the pad, so I took a chance and bought a 9mm Offset collar. What a JUST MEET!

[As an aside.
The offset collar I purchased is listed as compatible MODELZ900RS and Universal. However, it was discovered that the offset collar cannot be installed on Smooth. (Sweat) I thought I would go to Smooth because we are both Kawasaki, but … the place that didn't go to Smooth was Where we reuse OEM dwell Pin." I checked if the Z900RS dwell pin and the ZX-6R dwell pin are different, but the OEM parts numbers are the same for both. So, I measured the dwell pin on the offset collar with a caliper and found that the difference was a few millimeters in comma, so I used a drill to grind the dwell pin with paper while rotating it and checked it with a caliper several times before I was able to install it. I do not know if my 6R dwell pin was special or not, but if the dwell pin did not fit, it was either due to grinding or thermal expansion. I was worried that thermal expansion would cause discoloration when the collar was heated, so I polished mine. (Please consider this for reference only.)

I found the GROM to be very informative and helpful when customizing, but unfortunately the ZX-6R has less information. If you have any questions, please feel free to contact us. View Service Manual I'll check with the Manufacturer and have various conversations with the person in charge." And before I know it, I'm killing it. I hope this information will be of help to owners who are planning to customize their ZX-6R! I will publish the information for your reference.

How was your experience with it?
RadialMonoblock caliper M4 on 6R OEMFront Disc 310mm sutra without incident. "CaliperB fits." has been installed. View detail

PLOT

06 Mar 2023

Stainless SteelCaliper Mounting Bolt

Fits: Others

Japanese Webike user

5/5

Security as well.

What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had envisioned this. Then, my first tinker of 2023 was to strengthen the Brake! Originally, I was going to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found …Brembo caliper at a discount price, so I almost bought it on impulse. In order to install this Brembo caliper that I bought on impulse without any worries. PLOTbrembo Stainless SteelCaliper Mount Bolt I chose and purchased a

[How was the installation?
To install Brembo caliper, Offset collar is required. So we prepared PLOTbrembo Offset collar Offset amount 9mm. In the explanation column, it says If the Z900RS is equipped with the CaliperB, the OEM Mount Bolt can be used. The OEM mount bolt length for the ZX-6R is approximately 62mm.
We chose PLOT because they are sold by other manufacturers, but we chose PLOT because they are the best choice for this Mount Bolt. The reason why we chose PLOT is that this Mount Bolt requires the T50SizeSocket for Hexalobular/Torque tool for tightening, so it cannot be easily removed. (Nothing can compare to PRO for theft, though …) We chose PLOT for its good design and security.

Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the

How was your experience with it?
I think the custom feel and security has been improved… but the functionality remains the same. View detail

PLOT

01 Mar 2023

Exhaust Guard (Track Punching)

Fits: Others

Japanese Webike user

5/5

Prevents clothing from burning

[How is it used?
When I stop and put my foot out to land on the ground, I would prefer to put my foot on the back side of the footpeg because it is more stable and supports the body of the vehicle, but if I put my foot on the back side of the footpeg, the Exhaust System and the Pants come in contact and burn or melt. So I had no choice but to put my foot on the front side of the footpeg. But! I found a product that looked just right! I immediately purchased it.

Was the one you received as per Image?
It was Exactly Size where I was planning to install it.

Was the installation difficult?
The bracket welded to the reverse side of the Guard was bent into a trapezoidal shape with radio pliers and then attached with the included Gold Attachment Band so that there would be a certain gap between the Exhaust System and the Guard when installed.

How was your experience with it?
Now that the Exhaust System and Pants are no longer in direct contact, I can safely put my foot on the back of the footpeg, and I can support the body more firmly and stably than before, which doubles my sense of security!

[Included Parts:were they on?
Two Gold Attribute Band are included. Phillips Screwdriver is required to tighten these bands.

[Was there anything that disappointed you?
Not really!

Other items that would be helpful
Points and hang of installation:In the case of the FZS600 exhaust system, there was a lot of excess band left when the Gold band was tightened, so we cut off the excess band with a cutter wire, leaving about 10mm of excess white space. View detail

PLOT

28 Dec 2022

Oil Tank Bracket Clutch for S15

Fits: Others

Japanese Webike user

4/5

Simple design and the best product.

[How is it used?
The Brake Side is also made by the same PLOT. Oil tank stay Brake S50 only introduced. Part numbers are. BPS001SB It is
The clutch master cylinder is of course brembo's 19RCS. The clutch master cylinder is of course brembo 19RCS.
I was looking for something simple, low height, and black, and PLOT's Bracket was right in the middle of my criteria.

Was the one you received as per Image?
The Mount will be exactly as shown in the second product image, Mount Image! It is perfect.
Black color is paint or cation, Material is probably Stainless Steel.
Included Parts:is also all in black, so it was Exactly the XJR around the Handlebar in pure black.

Was the installation difficult?
It is not difficult to do. It comes with an illustrated Instruction Manual, so you will know immediately what to put on where.
One point is the orientation of the Bracket, but since there is no indication of which is the Tank side and which is the Master side, I was a bit confused for a moment.

How was your experience with it?
I have included a picture of the installation and it turned out to be the best Mount.
But! There is one caveat. I'm sorry I overlooked it myself...
This Bracket is made by brembo. Oil tankS15B only." This is the case
S15 "B" This is important.

The oil tank I had installed was S15A. yes, the angle of the outlet is different.
S15A→ with angled outlet
S15B→ ejector Straight

As it turns out, it did not stick. I was able to cut and install the length optimally because I also bought a new Hose.
However, the Nipple on the Master Cylinder side has become a little overloaded, so the Oil tank was removed as soon as possible. "B" We plan to change the name of the company to the one in the following table.

[Included Parts:were they on?
It is as shown in the picture. The thinner Washer was described as being for interference prevention, but I think it is too thin and will not come into play.

[Was there anything that disappointed you?
As a note, I was a little concerned about the angle of the oil tank, so I bent the bracket and the paint cracked. It is not a defect of the product or anything, but it is unavoidable because of the excessive force applied. View detail

PLOT

28 Dec 2022

Oil Tank Bracket Brake S50

Fits: Others

Japanese Webike user

4/5

Very good that it's exclusive!

[How is it used?
Brake master cylinder is brembo's 19RCS.
I was looking for a new bracket, and I was surprised to see that PLOT had a special bracket for this purpose, so I bought it.

Was the one you received as per Image?
The image shown in the product image was exactly as shown in the product image!

Was the installation difficult?
It's that easy! The illustrated Instruction Manual is also included, so there are no mistakes in assembly.
It was not clear from the Instruction Manual under what circumstances the ultra-thin Washer in the Spacer-like role would be used.
I did not use it because I was instructed to use it when there was interference, not necessarily to put it on.

How was your experience with it?
Very nice! Very Compact and nice texture! I was also happy to see that the Rubber Bush that attaches to the Oil tank also comes with an exclusive item.
The tank is mounted low because the height of the mount is the minimum required, and all the missing items are unified in black color, which looks very nice and tight.

[Included Parts:were they on?
It looks just like the first picture of the product. In any case, it would be convenient if Oil hose and Clip are also included.

[Was there anything that disappointed you?
Oil hose and hose clip are not included in the kit, so you need to prepare them separately.
As another point to note, if a handlebar with a slightly special shape, such as Condor Handle or Swallow Handle, is installed, the tank may not be tilted correctly.
This Bracket is probably Material:It is Stainless Steel, so it is not impossible to bend, but it is quite hard, so it is Material for Handlebar with hanging angle.:It may be better to use Aluminum flexible Bracket. View detail