- Home
- Product reviews
- Motorcycle Parts
- Drive Parts
- Other Clutch Master Cylinder Options / Repair Parts
- Simple design and the best product.... (PLOT: Oil Tank Bracket Clutch for S15)
【PLOT】Oil Tank Bracket Clutch for S15 Review
Simple design and the best product.
[How is it used?
The Brake Side is also made by the same PLOT. Oil tank stay Brake S50 only introduced. Part numbers are. BPS001SB It is
The clutch master cylinder is of course brembo's 19RCS. The clutch master cylinder is of course brembo 19RCS.
I was looking for something simple, low height, and black, and PLOT's Bracket was right in the middle of my criteria.
Was the one you received as per Image?
The Mount will be exactly as shown in the second product image, Mount Image! It is perfect.
Black color is paint or cation, Material is probably Stainless Steel.
Included Parts:is also all in black, so it was Exactly the XJR around the Handlebar in pure black.
Was the installation difficult?
It is not difficult to do. It comes with an illustrated Instruction Manual, so you will know immediately what to put on where.
One point is the orientation of the Bracket, but since there is no indication of which is the Tank side and which is the Master side, I was a bit confused for a moment.
How was your experience with it?
I have included a picture of the installation and it turned out to be the best Mount.
But! There is one caveat. I'm sorry I overlooked it myself...
This Bracket is made by brembo. Oil tankS15B only." This is the case
S15 "B" This is important.
The oil tank I had installed was S15A. yes, the angle of the outlet is different.
S15A→ with angled outlet
S15B→ ejector Straight
As it turns out, it did not stick. I was able to cut and install the length optimally because I also bought a new Hose.
However, the Nipple on the Master Cylinder side has become a little overloaded, so the Oil tank was removed as soon as possible. "B" We plan to change the name of the company to the one in the following table.
[Included Parts:were they on?
It is as shown in the picture. The thinner Washer was described as being for interference prevention, but I think it is too thin and will not come into play.
[Was there anything that disappointed you?
As a note, I was a little concerned about the angle of the oil tank, so I bent the bracket and the paint cracked. It is not a defect of the product or anything, but it is unavoidable because of the excessive force applied.
การออกแบบที่เรียบง่ายและผลิตภัณฑ์ที่ดีที่สุด
[มันใช้ยังไง?
ด้านเบรคยังทำโดย PLOT เดียวกัน พักถังน้ำมันเบรค S50 เปิดตัวเท่านั้น หมายเลขชิ้นส่วนคือ BPS001SB มันคือ
แม่ปั๊มคลัตช์เป็นของ 19RCS ของ brembo แน่นอน แน่นอนว่าแม่ปั๊มคลัตช์นั้นเป็นของ brembo 19RCS
ฉันกำลังมองหาอะไรที่เรียบง่าย ความสูงต่ำ และสีดำ และวงเล็บของ PLOT ก็อยู่ในเกณฑ์กลางๆ ของฉัน
คุณได้รับตามภาพหรือไม่
Mount Image จะตรงตามที่แสดงในรูปภาพผลิตภัณฑ์ที่สอง Mount Image! มันสมบูรณ์แบบ.
สีดำคือสีหรือไอออนบวก วัสดุน่าจะเป็น Stainless Steel
ชิ้นส่วนที่รวมอยู่: ยังเป็นสีดำทั้งหมด ดังนั้น XJR รอบแฮนด์จึงเป็นสีดำล้วน
การติดตั้งยากไหม?
ไม่ใช่เรื่องยากที่จะทำ มันมาพร้อมกับคู่มือการใช้งานที่มีภาพประกอบ ดังนั้นคุณจะรู้ได้ทันทีว่าต้องใส่อะไรตรงไหน
จุดหนึ่งคือการวางแนวของวงเล็บ แต่เนื่องจากไม่มีการระบุว่าด้านใดคือถังและด้านใดคือมาสเตอร์ ฉันรู้สึกสับสนอยู่ครู่หนึ่ง
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
ฉันได้รวมรูปภาพของการติดตั้งและกลายเป็น Mount ที่ดีที่สุด
แต่! มีข้อแม้ประการหนึ่ง ขอโทษที่มองข้ามไปเอง...
ขายึดนี้ผลิตโดย brembo ถังน้ำมัน S15B เท่านั้น" เป็นเช่นนี้
S15 "B" นี่เป็นสิ่งสำคัญ
ถังน้ำมันที่ฉันติดตั้งคือ S15A ใช่ มุมของเต้าเสียบแตกต่างกัน
S15A→ พร้อมเต้าเสียบเข้ามุม
S15B→ อีเจ็คเตอร์แบบตรง
ปรากฎว่าไม่ติด ฉันสามารถตัดและติดตั้งความยาวได้อย่างเหมาะสมเพราะฉันซื้อท่ออ่อนใหม่ด้วย
อย่างไรก็ตาม หัวฉีดที่ด้านกระบอกสูบหลักได้รับภาระมากเกินไปเล็กน้อย ดังนั้นถังน้ำมันจึงถูกถอดออกโดยเร็วที่สุด "B" เราวางแผนที่จะเปลี่ยนชื่อบริษัทเป็นชื่อในตารางต่อไปนี้
[รวมชิ้นส่วน: พวกเขาเปิดอยู่หรือไม่
ดังแสดงในภาพ ทินเนอร์ Washer ถูกอธิบายว่ามีไว้สำหรับป้องกันการรบกวน แต่ฉันคิดว่ามันบางเกินไปและจะไม่มีประโยชน์
[มีอะไรที่ทำให้คุณผิดหวังไหม?
โปรดทราบว่าฉันกังวลเล็กน้อยเกี่ยวกับมุมของถังน้ำมัน ดังนั้นฉันจึงงอตัวยึดและสีก็แตก ไม่ใช่ข้อบกพร่องของผลิตภัณฑ์หรืออะไร แต่หลีกเลี่ยงไม่ได้เนื่องจากใช้แรงมากเกินไป