Reviews
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Changed to LED Headlight
I bought this to use as a LED Headlight.
The position lamp can be attached, but I don't use it, so I have blinded it.
View detail
Fits: HONDA NSR250R(SE), HONDA NSR250R(SE), HONDA NSR250R(SP), HONDA NSR250R(SP), HONDA NSR250R(SE), HONDA NSR250R(SP)
The quintessential DMR.
Manufacturer is missing.
I replaced it after the Overhaul, though it's not a reduction.
View detail
Fits: HONDA NSR250R(SE), HONDA NSR250R(SE), HONDA NSR250R(SP), HONDA NSR250R(SP), HONDA NSR250R(SE), HONDA NSR250R(SP)
That's the DMR!
Manufacturer is missing.
It's not particularly diminishing.
This is a must have when changing from 89 dry clutch to Driven because the 89 Driven gear is made differently than the 90 Driven gear.
View detail
Thank you for all your help
It is quite helpful, especially since there are no problems and the price is low.
Thanks to DMR for all the Large changes.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Very nice
When I ordered related products for xr motard, I found that only one product can be ordered. For its appearance, the transparent part is very crystal clear, but I am also annoyed by it. I hope it will be better if there are more color choices. . View detail
Inexpensive but good quality.
I used it on my NSR Overhaul.
I was worried about T2RACING, but I decided to go with DMR.
Should I have gone with MechanicalSeal-less?
View detail
It's a must-have.
OEM was too expensive for me to afford!
You, DMR, are a strong NSROwner!
View detail
Thank you.
That's half the price of OEM!
I bought it without hesitation.
DMR is an NSR friendly Shop!
View detail
It's cosmetic.
I had a hard time with T2's, but I decided to go with DMR. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Press key ON to move to Hi.
With the key off, remove the RCValveMotor's coupler and set it to HI while Connect Mr. Smoosh. If you turn on the key, Pulley of Valve will move to HI side. But if Kill switch is OFF, it won't move to HI even if you turn ON the key. So be careful. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
I've moved on to HI
Purchased for WidePulleyfor Replacement
When I tried to make a full open adjustment, I turned on the Engine and confirmed that it was high, then turned off the Engine hand (of a clock)
Remove the Chamber and adjust the wire and turn on the Chamber and check the engine This is a process called
By using this product, you can work without hanging the Engine and without removing the Chamber Finish
I think it's going to be pretty quick
View detail
The Savior of NSR
We chose the DMR because OEMs are discontinued and therefore unavailable and other companies' products are more expensive
MechanicalSeal Quantity:Because the Set was also purchased, the parts necessary for the exchange of the water pump were able to be prepared
These parts are very helpful these days when OEM parts are no longer available
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Convenient
A complete set of what you will need is Quantity:The set comes as a set, so ordering is easy
And it's cheaper than OEM parts
If you want to order OEM Parts by looking up the number and ordering OEM Parts, I thought it would be much better to buy this one
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Definitely brighter
I used to be stunned by the darkness of the flashlight of a long time ago, but this product is definitely brighter The latest LED Headlight Standard However, the latest LED HeadlightStandard EquipmentMotorcycle is not far behind
XR100MOTARD does not have the same connector as the XR100MOTARD, so soldering and processing of the terminals are required It is
Moreover, a Position lamp is attached, but there is no use for it I blocked it with tape
I would have liked to see the Multi-reflector used as an OEM since I drive a moped at night
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
The look and brightness of the Headlight has been improved in the Large width
Results of installation
The historical Lens cutType was replaced by the Multi-reflector Motorcycle itself feels rejuvenated
The brightness that was thought to be reduced by Lens cut became the original brightness of Valve
(Valve uses DAYTONA's high efficiency Valve 25W, not the included Blue)
There are some points to be improved as follows, but it is an alternative to OEM parts that can be installed with almost no modification If you think about it, it's what you'd expect
The difference between the product photos on the web and those on the web
In the photo, the HeadlightBody and Bracket have a glossy platting look The paint is a solvent that is used to degrease the paint (for reasons to be explained later) Thin? It's thin?
3. Installation
Because the KAWASAKIBracket interferes a little with the Cowl, a little in Pliers Connected to each other and removed with Gold genus fatigue to deal with it
Because the bracket for adjusting the optical axis interferes with the cowl, it is necessary to bend it slightly
Screw and spring for optical axis adjustment are included in the product Includes Parts:(Screw is thicker than the hole in the cowl but no problem (Screw is thicker than Cowl's hole, but no problem)
Wiring of the headlamp does not match (Male and Female of Bullet Terminal) Female is partly reversed), so if you process it is OK, but use the vehicle OriginalWiring
Position lamp
As mentioned in the other imprints, Material:Rubber's SocketPlug is scuffed and comes off with little force
The rubber plug is a soft material, so if you put on and off the plug several times, it may get cracked And then, the scum comes out
It would have been better if it was a solid and rigid rubber, but it was not reliable The SocketPlug was removed and the hole was covered with Aluminum Tape (Confirmed that the paint can be thinned with solvent by degreasing at this time (Confirmed that the paint is thinned with solvent by degreasing at this time)
Because the headlight is always lighting, if it is a position lamp of this degree, it is unnecessary It is good without original
5.Rubber cover of Headlight Bulb
The material of the rubber may deteriorate quickly, so we have to make sure that we can use it in the vehicle Installations
Installation is not a problem as long as you pull it on firmly
6.Others
The LampLens was scratched, even though it was supposed to be new
I was dissatisfied with the initial quality control (pride and love for the company's products), although I put up with the scratches as they would eventually appear
Because of the scratches, the Material (or surface treatment) of the lens itself is soft Maybe it is
View detail
Bulletin board street
I bought a reputable DMR made in Net reviews.
It is quiet and nice as described! It was cheap so I was a little worried but it seems good to make it solid.
The Gold genus made by a company that I used before was bothering meow and sounds, and the Coat which I expected was also torn off.
It seems to be higher quality than OEM? We are looking forward to the durability of MCNylon!
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
The effect was Large
I use it with XR 100 MOTARD, but it got brighter than I imagined. You can see clearly that OEM's light distribution is not good.
Installation is easy, but I think that some ingenuity is required. Socket and Waterproof Cover should better use OEM (It is usable normally). Apart from Reflector, it was made quite reasonable.
I think that it is inexpensive against the effect. LEDs and HID will also be brighter.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Coarse making in various places
I purchased the odor of OEMLens with Lens cut to manage it.
According to other reviews, Position lampWaterproofRubber is already loose at the time of arrival - The terminal of the contact part with the Valve of the PH7's Socket is disconnected, there is considerable difficulty in fitting etc. etc. , I decided not to buy it by paying 4000 yen.
As a result I bought Lens with a warehouse and OEM brand new item.
Compared to Lens which was blurred with Yellow for years, the new item is cheap as it is a little 2000 yen at Beauty to fluffy.. I wish I had made OEM brand new from the beginning.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Hi all, This headlight lamp is a great alternative to the OEM unit, great quality and finish, Fits perfectly. I would highly recommend this item.
Hi all, This headlight lamp is a great alternative to the OEM unit, great quality and finish, Fits perfectly. I would highly recommend this item. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Mounting on Friend's Full normal KSR
* I attached it to my friend's KSR. It is a representation of my friend.
【What made you decide the purchase?】
Light was quite dark
【How was it actually used?】
It got pretty bright
Use Valve included
【Was it difficult to install? (Hard parts case)】
I scraped a little light cowl
【Please tell me the point of installation and hang (in the case of Hard parts)】
If the drip-proof Cover? Is an OEM, a gap can be formed, so remove the LightConnector,
Set the attached Cover finally
Do not be afraid to do it carefully Large durable
[Is there anything I was disappointed about?]
When Position bulb socket wears on Multi-reflector, it goes through with a throat.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
Outside diameter of Position bulb socket? Precision of hole of Multi-reflector.
【Have you compared items?】 Required
LED Light
[Others] Any
I will add it if my friend says something.
View detail