Reviews
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Fits: HUSQVARNA TE300, SUZUKI RM125, SUZUKI RM250, KAWASAKI KX250, KAWASAKI KX125, HONDA CR250R, HONDA CR125R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX
Soft touch
Although the hand guard was still attached, the throttle tube was cracked and battered from the repeated impact of falls, so it was replaced.
Since I wanted to try a different grip on the Clutch Side than on the Normal side, I chose the Soft side.
I haven't driven far or on forest roads yet, but I expect it to reduce fatigue.
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ85, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
Fits: YAMAHA DT100, YAMAHA DT100B, YAMAHA DT100, YAMAHA DT100D, YAMAHA DT100E, YAMAHA DT100F, YAMAHA DT100G, YAMAHA DT100H, YAMAHA DT100J, YAMAHA DT100K, YAMAHA ENDURO, YAMAHA DT50L, YAMAHA DT50L, YAMAHA ENDURO, YAMAHA DT50L, YAMAHA ENDURO, YAMAHA DT50L, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85
Safe and Secure OEM Parts
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This product is Oil seal on Crankshaft/Alternator side. (Crank seal？) to
When this Seal comes loose, 2ndOil leaks from the Crank to the Alternator side.
Although there was no leakage during the O/H this time, it was replaced as a preventive measure.
How was your experience with it?
OEM Parts is the only choice for Engine parts.
There is no problem with quality. Since it is press-fitted, it requires a hang to pull it out of the crank. In my case, I lightly drilled a hole with a drill, screwed in the bolt, and pulled it out with pliers.
When hammering, the amount of hammering was carefully measured with Caliper using Socket.
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
Be careful not to hit too hard or too supple.
If it doesn't leak, it doesn't matter...
View detail
![SUPERNon-seal Chain 428NZ Gold&Black [Crimp(ZJ)Joint included].](https://img.webike-cdn.net/catalogue/images/8031/428NZ_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
I think it's a good Chain.
The chain on my TW200 was falling apart, so I bought this one.
I was also worried about the Seal chain, but I don't drive that far and I don't have a lot of distance to cover.
That I've used it on groms and haven't had any problems.
The rest is just price. lol
The churn that came with it so far was awful.
After the replacement, it feels great.
View detail
Fits: HONDA TL125, SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA CBR125R, HONDA CB125TZ, HONDA CB125TB, HONDA CB125TA, HONDA CB125T, HONDA CB125T, HONDA CB125R, HONDA CB125JX, HONDA CB125J, HONDA C100EX, HONDA C100 SUPER CUB 100, HONDA C100 SUPER CUB 100, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T
good price product
I purchased it for C125. The stock chain isn't bad, but I wanted a more durable chain.
Even if you look at it, the thickness is different. We expect overwhelming durability compared to the original product. Now I will die without holding C125.
It is a satisfactory choice at a good price. -------------------------------------------------- -------- I purchased it for C125. The stock chain isn't bad, but I wanted a more durable chain. Even if you look at it, the thickness is different. We expect overwhelming durability compared to the original product. Now I will die without holding C125. It is a satisfactory choice at a good price. Powered by Google Translator
View detail
Fits: YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA WR400F-450F, YAMAHA WR400F, YAMAHA YZ85, YAMAHA YZ65, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F
I'm too weak.
It was distorted when I fell and hit it.
With OEM, this didn't happen even if you hit it hard..,
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Best of Thin Grip
YZ125X (MY22) The first time I went out to Race, I installed it on a
Before this, ZETA's BaseGripSlim (ZE47-6021) used to use.
situation in which a person's hands are small and their face is partially concealed (esp. from behind the scenes) (Gloves are available in Men'sS Size or LadiesL Size) So, I am constantly looking for a thin Grip.
If you look at MAJOR, I think this ODI no-waffle or ZETA's BaseGrip would be the smallest diameter at 29mm. (Check yourself)
I feel that there is less vibration in my hand compared to my previous ZETA BaseGrip.
It may be a difference in Compound, since ZETA should obviously be thicker in Rubber thickness due to its structure.
Of course, the ease of installation that Lock on grip offers is very good.
The ease of removal is very appreciated when you want to switch between multiple Handlebars for a test run.
Also, in the case of YZ125X, it can be installed with the supplied Cam.
There are two caveats.
One is with the hand guard.
Since this grip has only a closed end, it is necessary to drill a hole in the grip end to attach a closed hand guard.
Unlike ordinary grips, the inside is made of a plastic tube, so it is necessary to use a Footpeg Drill or similar.
The other is with Handlebar.
If the Knurl on the Clutch Side of the Handlebar is Large, it will not fit unless the Knurl is cut away to some extent.
I put it on a Pro taper Konzer and it scraped off quite a bit of Knurl.
I had a ClosedHand guard + Konzer, so it took me about 30 minutes to install it.
I will have to use it more in the future to see how it works, but I feel this is fine unless you are very Muddy.
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
pretty...
I haven't used it yet, but Monkey 125's 420 chain deforms very quickly. Since it was converted to 428, I expect powerful drive transmission and durability to have improved. Because it is a gold colored chain, it goes very well with the yellow monkey. View detail
![STD Series Chain 428HD Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428HD_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, YAMAHA WR125X, YAMAHA V80N MATE, YAMAHA V50N MATE NEWS, YAMAHA V50N MATE NEWS, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, HONDA CB150R, KTM 85 SX, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX125
street riding
It rusted right after the Muddy run. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
The XG250 TRICKER has a slightly smaller take-up diameter than the OEM.
Purchased for installation of hand guard to be fixed to Bar End.
I installed it on my XG250 TRICKER and the take-up diameter is a little smaller than OEM.
I felt no discomfort when I rode it.
It was easy to open end for now, so that was helpful.
View detail
Fits: HONDA CR125R, HONDA CR250R, HUSQVARNA TE300, SUZUKI RM250, SUZUKI RM125, KAWASAKI KX250, KAWASAKI KX125, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250, KAWASAKI KX450F, KAWASAKI KX250F, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW225WE
fictitious advertisement
Since lastOrder
I was informed that it was discontinued and then the listing was also discontinued.
I give up.
I ordered it, but they said they could not accept my order because the product was discontinued!
Please don't put anything on the site that I can't afford.
Please be aware of this, everyone!
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, SUZUKI RV90, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM80, SUZUKI RM80, SUZUKI RG80, SUZUKI RG125 γ, SUZUKI RG125 γ, SUZUKI RG125E, SUZUKI RC50, SUZUKI RA125, SUZUKI MARAUDER125, SUZUKI LT80, SUZUKI K90, SUZUKI K125, SUZUKI GSX-S125
I think it is just fine for CUB.
I think it is just right for CUB. It's also inexpensive! View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, SUZUKI RM80, SUZUKI RG80, SUZUKI RG125 γ, SUZUKI RG125 γ, SUZUKI RG125E, SUZUKI RC50, SUZUKI RA125, SUZUKI MARAUDER125, SUZUKI LT80, SUZUKI K90, SUZUKI K125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GS125E, SUZUKI GN125E, SUZUKI GIXXER GIXXER 150
Cheap and good
Used on SUPER CUB110 (JA44). Please purchase 100LINK for use with this Motorcycle.
Since it is non-seal, it requires frequent chain adjustments, but since it is replaced every 10,000 km, we use this inexpensive one.
I struggled to remove the Clip. （I had a hard time removing the Clip.)
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Quite soft.
Compound is quite soft.
The Grip is soft enough to be squishy when pushing and carrying Motorcycle. However, because the grips are thicker, it is easier to raise the arms. It is also a little harder to use intuitive controls.
Both the Clutch Side and Brake Side can be easily replaced because they can be installed without glue, but I am a little concerned that the Clutch Side may come loose.
View detail
Fits: HONDA CRF150R, YAMAHA YZ85, HONDA CR85
Replacement from NORMAL
I am new to On road only,
I am satisfied with the Large position and appearance, although the Top Bridge was also replaced at the same time. I think it was good for me, who has short arms, to have a comfortable posture. I can't say for sure because there are differences in body shape among individuals, but I am glad I bought it.
View detail