Reviews
Braque is …in JAPAN!
It's Brake related. There are made overseas at half the price, but …hey….
Rather than regretting it later, I chose something that I could use with peace of mind. I am satisfied & relieved. However, I thought that the cutting marks were rather conspicuous, as was the front support. I was not disappointed with the Objection. Maybe it is because it is a hard material.
View detail
Improved rigidity
It's been three days since I installed it.
I don't know if it has become easier to shift.
What is certain is that the long Shaft is compensated for and the rigidity is assured by the increased stiffness.
View detail
I am satisfied.
I installed the GEAR because it was difficult to get in after the car was delivered. After installation, it is no longer difficult to insert the GEAR and it works well. View detail
Looks good.
Installed on an 88cc MONKEY with a new head. I chose this oil cooler because the external oil cooler is too messy. The effect is still unknown, but it should be better than no oil cooler.
Also, the standard Plug socket is too long to fit in the Plug replacement, and the Manufacturer also specifies Glasses Wrench. Please refer to the short socket we found. Part number HPW-3B-16
View detail
คอไอดี สวยงาม คุณภาพสูง ใช้งานได้ดี View detail
Manifold
Variable Manifold Accuracy is also good View detail
Easy installation and effective
I installed it on my Circuit Running car and it works well as a shift guide.
The installation itself can be done without any problem by those who can perform simple maintenance if they read the Instruction Manual properly.
No special tools are required.
When shifting the rod, does the shift rod itself bend when shifting the rod before and after installation? Does it wobble? Does the force escape? The feeling of the shift rod itself bending or wobbling when shifting has disappeared.
GEAR is now going into Smooth, so it feels good to run on the Circuit.
The price seems a little high, but this can't be helped because there is not much of the car in circulation as a model.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Highly satisfactory!
From a certain company's thin Swing Arm until now.
Changed to GCraft.
First of all, it looks good!
The high price of this product is enough to give you a sense of ownership and satisfaction.
The installation requires a certain amount of skill since it is an undercarriage.
However, Special Tool is not required.
You can ride it, look at it, polish it, w
View detail
Replaced from non-bearing.
The shift guide from another company that I had installed a year ago was no longer effective due to wear, and it was time to replace it,
This time, we purchased and installed this product with built-in bearing.
Both other companies and this GCraft product have the same Fee Ring, which is a straightforward GEAR.
Both GCraft and other companies' Shift guides Top 3 Best Parts for CUB Series Installation of the two.
GCraft's products are about three times more expensive than other companies, but if they are machined or have built-in bearings, the price is reasonable, and they do not lose their effectiveness due to shaving.
The instruction manual says that the footpeg can be installed without removing the footpeg if only the shift pedal is removed, but the spring of the collapsible footpeg is in the way, so the footpeg must also be removed.
However, I think Torque wrench is essential since it is a part to be installed around the engine.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Now you can drink.
Anyway, Cool.
You can polish Motorcycle, look at it and have a drink.
The installation is routinely MONKEYRose and
Level is normal if you are a person who is doing Level.
Special Tool is also not required.
Well, I am satisfied visually.
View detail
Convenient to have
It is not necessary to have it, but it is convenient to have it!
Stylish and cool when present!
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Cast Variable Manifold Indicator
Motorcycle MONKEY
Exhaust System OUTEXExhaust System Up Type
Tank OEMGORILLA
carburetor YOSHIMURA Mikuni TM-MJN24 Carburetor
Manifold + YOSHIMURAAngle Spacer
I bought it because the cook of the Fuel Tank interferes with the carburetor in the above Spec.
The angle of the carburetor can be freely adjusted so it no longer interferes with the Cook.
The Manifold is a little longer than the one made by YOSHIMURA, but I am satisfied with it because it does not interfere with the cook.
View detail
When you are looking to Maximize Rigidity on the Grom
About quality and texture: I am happy with the quality of the engine reinforced plate from G-Craft. Made from aluminium and machined to allow for high strength and light weight. About the feeling of use: The engine reinforced plate allows for an addition connection between the engine and the frame which leads to a noticable reduced movement and vibration. Products to buy together: A set of steering stem stabilizers from Outex would also be desirable to purchase alongside the engine reinforced plate to also add some reinforcement to the steering. Difficulty of installation: The process to install takes about 20 minutes, position the engine reinforcment plate and install the 4 bolts into the engine followed by the 6 bolts that clamp the plate around the frame. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting a beauitfully designed product made from quality aluminium stock. With there being no other branded product like this there are non to compare. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking finely detail your Grom then go for it. View detail
Due to a change in position
I changed my seat to a Kitaco one before the season, but when I started riding...
I don't mind the footing, but when I run, I find myself leaning forward more than before.
I'm mainly a touring rider, so I like to ride in a relaxed position.
So I bought it.
It's not a particularly difficult process, since all you have to do is remove the handle and insert the product.
I bought the two centimeters up, and I think it was just right.
View detail
They Do Offer a Much More Stable Platform to Work on the Monkey 125
About quality and texture: I am happy with the quality of the suspension spools from G-Craft. The spool is made up of two parts that are secured together with the included fastener. The material used is aluminium with the black surface being anodized and the silver surface being a raw finish. About the feeling of use: I find these spools a useful addition when working on the Monkey 125 from cleaning and lubricating the chain to stabilizing the rear end to allow the front end to be lifted to remove the front wheel. Products to buy together: Some lifting hooks for your rear servicing stand would also be desirable to purchase alongside the suspension spools. Difficulty of installation: The process to install takes about 10 minutes. Remove the OEM Honda rear shock nut and install and torque down the silver part of the spool and then install align and tighten the black part with the included fastener. Repeat the process for the other side. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting quality materials and finishes with this product at a higher price as compared to the stainless steel option available on Webike and the even cheaper quality option available elsewhere. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You may think these suspension spools are not neccessary but they do offer a much more stable platform to work on the Monkey 125 then just using the platforms on the rear servicing stand. View detail
Cool!
I like this shape the best!
It is well made and I have no complaints!
View detail
Fits: Others for Φ30 Fork
for Brembo
I was worried about installing a Brembo caliper, but decided to buy this one.
I wanted to buy Black, but there seemed to be no sales? I wanted to buy the Black one, but there seemed to be no sales, so I bought the Silver one.
It does not look bad. The included Stainless taper bolt is a nice touch.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Texture is good!
KEIHIN PC20Exclusive Design, so it can be installed without any problem. The adjustable design allows for subtle angle adjustment. View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
The best
I put it on after processing and it is great.
I would like to see it sold with this Design from the original.
View detail
Nice Items
Perfect for dress-up!
I want it to be re-released!
View detail