Reviews
Is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom
About quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a gold anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect. About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom with it's gold finish that matches the forks so well, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads. Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg. Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper. Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very limited. View detail
Offers a stunning new look over the factory red brake caliper while also improving braking performance
About quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a gold painted surface finish and includes brake pads, the quality from the overall fit and finish is perfect. About the feeling of use - The P2 rear brake caliper offers a stunning new look over the factory red brake caliper while also improving braking performance with it's larger piston diameter and higher quality brake pads. Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear braided brake hose. Difficulty of installation - The installation of the P2 rear brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper. Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail
brembo at a low price!
It is a cosy way to strengthen the brake of old cars.
It is an inexpensive brembo, but it has enough advantage for our needs!
Is it compatible with SUNSTAR's PremiumRotor? I wonder?
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX 14 R, KAWASAKI H2R, DUCATI 1103 V4 Panigale, TRIUMPH Street Triple RS 765, MV AGUSTA F4 1000 LH 44, MV AGUSTA F4 RR 998, KTM 1290 Superduke R, DUCATI X-Diavel S, HONDA CBR 1000 RR SP, DUCATI Multistrada 1200 S, DUCATI Monster 1200 S, DUCATI 1299 Panigale, DUCATI Monster 1200, DUCATI 1260 S Multistrada, DUCATI 1199 Panigale, DUCATI 1199 Panigale Superleggera, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100
Operability Up
Replacement from NisshinOEM.
From the initial touch, the softness of the touch is softer and the more you hold it in, the more it works, and I felt that the operability is much better than before.
I even regretted wearing it and wished I had changed it earlier.
View detail
For GALE SPEED
[How is it used?
I purchased this along with a replacement Clutch master from GALE SPEED.
Was the one you received as per Image?
Yes, it's brembo, so it's business as usual.
The quality is good and I feel like I have no other choice.
Was the installation difficult?
Some skill may be required. Air venting is important! If you can't do this yourself, you should still ask a Motorcycle shop to do it for you.
How was your experience with it?
I have been using it for many years and have never felt bad about it.
There are two different colors, though, [Color] Clear (White) My personal opinion is that Brown is relatively more luxurious.
[Included Parts:were they on?
Not particularly.
[Was there anything that disappointed you?
No, sir.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Clutch Side is a Small Tank and the Brake Side is a Large Tank, I didn't understand why at first, but recently I finally figured it out:the Brake Side changes the temperature of the Fluid as the Brake is used, so when it gets hot, the excess Fluid goes back into the Tank and keeps it working properly. When the Brake Side gets hot, the excess fluid is returned to the Tank to maintain normal operation. On the other hand, the Clutch Side has almost no temperature change, so the amount of fluid that returns to the tank is small!
View detail
RearBrakes custom
The control is outclassing with the way brembo is able to make it work. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
At first I was puzzled by the difference in Touch.
I was happy with the OEM Nisshin so far, but since the Caliper is brembo, I thought it would be better than what I have now. I bought it because I thought it would be better than what I have now.
I am not a fan of snaps and touches, so I was a bit confused at first, but I thought the Lever ratio 18 would be good for control. I would like to try various things with Winding when the road surface temperature rises a little more.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX 14 R, KAWASAKI H2R, DUCATI 1103 V4 Panigale, TRIUMPH Street Triple RS 765, MV AGUSTA F4 1000 LH 44, MV AGUSTA F4 RR 998, KTM 1290 Superduke R, DUCATI X-Diavel S, HONDA CBR 1000 RR SP, DUCATI Multistrada 1200 S, DUCATI Monster 1200 S, DUCATI 1299 Panigale, DUCATI Monster 1200, DUCATI 1260 S Multistrada, DUCATI 1199 Panigale, DUCATI 1199 Panigale Superleggera, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100
Genuine Brembo 17RCS Corsa Corta Master Cylinder
One of my customers is going to out this bike on the track so I went to work on the braking system. One of the first things I wanted to change was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decided on this one as it fitted with the specs of the bike in mind. Finding the correct master cylinder was not hard but there were a few choices but I went for this one, the 17RCS Corsa Corta in the end. It had all the requirements I needed so it went in my basket. I had a few other parts and the shipping was reasonable for what I had. EMS got my order to me in 5 days. The master cylinder came with the standard stock lever length which was perfect for my needs. It is the 18 x 20 one so works good with teh floating calipers on the bike anyway. It came in the Brembo box and also came with a few copper washers. I had already sourced the HEL line that would make this all work. The master cylinder is a real piece of kit and fitted really well with the bike and the instrument cluster I was leaving in situ. Not a hard job once you have all the parts together. This master cylinder is awesome and so much better than the stock one. Oh and by the way, looks the nuts. There are just so many adjustments that you can definitely find the right setting for your liking. I do like the 18 ratio and H pivot setting. Very pleased with this part. Thanks Webike for the great service you provide. View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Control outstanding!
The initial effect is a little strong and the controllability after gripping is great, but the wear is not so great, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I have received the product but it is in Stock condition. I will add a review after I use it. brembo will be Large sturdy! I'm hoping it looks the same as the SBS, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I haven't used it yet Stock I'll review it when I do. View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I have not used it yet. I bought it for Stock. I bought brembo's Sintered, but it looks the same as SBS's Sintered. If it runs out after 3000 km, it will be the same. View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
Not used yet Purchased for Stock View detail
functional beauty
I bought these to go with brembo's Brake master and they look great.
It seems to be larger than I expected, but the amount of Fluid is nice and easy to see.
View detail
Fits: KTM 690SMR R, HUSQVARNA SUPERMOTO701, KTM 690SMC R
Diversion to Husqvarna SVARTPILEN701 Spoke wheel
Since this is an OEM Equivalent Product, we give it 3 stars.
It can be attached to a spoke wheel, but cannot be used on a casting wheel.
View detail
Fits: HONDA CB400SF HYPER VTEC Revo, HONDA XL400 TRANSALPV, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SFHYPERSpecII, HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SB, HONDA CB400SF HYPER VTEC, HONDA CB400FOUR, HONDA CB400SB, HONDA XL650V TRANSALP, HONDA XL600V TRANSALP, HONDA Africa Twin650, HONDA HORNET900, HONDA CB750
Rear brake rotor
When I had my CB750 RC42 inspected, the clerk at Honda Mahaja Super JOGZr Wing Black told me that I should replace the rear brake pad and rear brake rotor because they were worn out, so I bought the parts and replaced them myself. It took a long time to replace them, but it was a much easier replacement than I thought it would be.
It was a very enjoyable holiday. I think the next step is to replace the front brake rotors.
View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
I understand it can handle up to sports driving...
Due to late delivery of my regular Pad.
The selection caught my eye because of how brembo's SACompound.
The product had a Level look and feel, which frankly is not good.
I thought at the time that it was okay because Red looks great when mounted on Caliper.
After the Circuit run, I looked at Caliper and saw that the Red, which had been so prominent, was missing.
I disassembled it and checked it and found that the painted parts were burnt and blackened after an hour's run.
The place used is Motegi, but this is with the body acclimated and not used harshly.
As for the appearance, a little Hard driving is a disappointment.
The performance of the Brake is in line with the price, the durability is not that great, and the cost performance is not so good.
I don't think there will be any problem if you are touring normally, but I don't think I will choose brembo pads in the future.
View detail
Fits: KAWASAKI Z800, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GLADIUS650400ABS, SUZUKI SV650, SUZUKI SV650X, SUZUKI SV650 S, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, KAWASAKI Z900, KAWASAKI Z900, HONDA X-ADV
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
Fits: HONDA CRF R 250, HONDA CRF R 450, HONDA CRF X 450, KTM EXC 125, KTM SX 125, KTM SXS 125, KTM EXC 250, KTM EXC F 250, KTM EXC G 250, KTM XC F 250, KTM EXC G 450, KTM SX 350, KTM SX F 350, KTM XC F 450, KTM SXS 450, KTM SXS F 450, HUSQVARNA TC 250, HUSQVARNA TC 450, HUSQVARNA TE 450, KAWASAKI KXF 250
Changed from BrakeTEC
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
Front brakes master of EC250 has a Brand's MASTER called BrakeTEC, though,
The Touch is surprisingly chica-chic and the Piston is like having a Large-sized one on it,
Even if you are riding Off-road, you will be up in arms in no time.
Then I found this product. I bought it and installed it.
As expected, the Touch is now the same as the Front brake on my previous TE250, which is an improvement and easier to ride.
However, at times I thought it was soft, and if it had a little more Snap and feel, it would have scored 100 points.
Maybe there is still a little air left (I TRYED to bleed the air about 3 times).
View detail
Installed on an EC250.
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The 2023 EC250 is equipped with a BrakeTEC Clutch master on the Clutch.
However, the semi-crab and the feel of the controls were not very good and I wanted to try this brembo product.
Touch is a bit heavier than BrakeTEC's in NORMAL.
However, with BrakeTEC, the Clutch was light, but if you put your finger on it even a little, the Clutch would become half-clutched, and you had to be very careful when operating the Clutch.
I am very satisfied with the brake master and brembo!
View detail