Reviews
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
View detail
Seat NBS JAPAN
My Honda monkey did not have the original seat when I bought it. Outwardly, it looked great, but the ride was somewhat uncomfortable. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of the materials, over time everything will be clear, while everything is fine. By design, everything is fine, soundly, there were no problems during installation. On my Honda monkey, when I bought it, there was not an original seat. Outwardly, it looked great, but it was somewhat uncomfortable to drive. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of materials, over time everything will be clear, while it is normal. By design, everything is fine, soundly, there were no problems during installation. View detail
Fits: YAMAHA jog, YAMAHA vino, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA LIVE DIO
Mounted on VINOsa-26j
I installed it on my VINOsa-26j, but I thought it would be easy to get dirty, so I went with Black.
I thought it would be easier to clean with Brown if it were this hard.
View detail
prompt return
The product arrived but Mirror back and front Wound in several places.
I don't want to buy and use a product full of Wound.
Returned immediately.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
APE100 footpeg replacement
I used it to replace the footpeg on my APE100. It looks much better now. The screws that hold it in place seemed to come off easily, so I applied Screw lock and installed it. Installation was easy. View detail
I've had it for 8 years.
I installed it with Small machining and … what a surprise, I've had it for 8 years in its current state.
I've kept most of them covered with Cover, but even so, they've lasted surprisingly long; if they were OEM, they would be a shadow of their former selves.
As expected, recently it has become difficult to remove dirt and Black Mold grows under the Cover, but each time I put Dustcloth soaked in kitchen bleach and bleach it. This is a very good way to revive it.
For persistent stains, such as those from shoe hits, use Micro compound. In moderation." Taking.
I know it's cheap, so I should buy a new one, but I'm using it after modifying it a bit, so it's a hassle to replace it and modify it again, and I'm quite attached to it.
What's a bit of a surface white is the color loss and the decrease in transparency.
I recently noticed that it was originally Beige-ish. That cheesy color. was nearly bright White from sun exposure & fading over time.
The transparency is much less and no longer shows through to the Levels close to OEM.
The surface also remains smooth without any MicroCracks.
This made it even harder to replace them.
I heard that some lots of this product have a round BALI in the Center section (← did they change factories along the way?). I heard that some lots of this product have a round BALI in the Center part (did they change the factory in the process?), but perhaps the current distributed product has been solved by eliminating the BALI.
I can recommend it quite strongly because it is semi-durable and becomes more luxurious with each use (laughs).
View detail
Fits: SUZUKI birdie, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA Cygnus, YAMAHA Cygnus, HONDA APE 50, HONDA GORILLA, HONDA SUPER CUB 50 (AA04), KAWASAKI KDX125/SR, KAWASAKI KDX250SR, SUZUKI LETSG, SUZUKI LETS4, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESS V100
bulb-out replacement
I was looking for a product that was out of bulbs and the same etc. as the installed product, found this one and purchased it.
The price is reasonable and I hope it has some longevity.
Brightness and other aspects of the Level are fine for normal use.
View detail
It's just cheap
Price suitable
I would like to see the products inspected properly at a reasonable price.
View detail
Fits: HONDA Today, HONDA Today, HONDA Giorno, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
How durable is it?
Restore TODAY after many years of neglect, 4 years.
Will the Fork Boots break off from age?
I couldn't cut it out of my mind…
I noticed a tear and replaced it.
I thought OEM would be better in terms of texture. I thought so.
How long do you think it will last as a consumable?
I would like to verify this.
The protrusion for fixing the drum brake on the LeftFork was quite fiddly.
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
Used in Wheel refurbishment
SEROW225 (1KH) for two different uses:off-road racing and everyday use such as touring.
It is troublesome to change tires every time, so I used BRONCO's Wheel which was given to me by someone else. (F-19,R-18) Quantities that also used:I am using 2 sets of BRONCOWheels. The BRONCOWheel I received did not have a disc plate, so I bought this one. Since I had just changed the SEROW side, there is not much difference in the degree of wear, so I can use it without worrying about it.
The performance is perfectly fine. It looks almost OEM, a bit tacky in a good way, which is great for older Motorcycles.
In addition, SEROWheel (F-21,R-18) is equipped with Enduro tires, which are not allowed on public roads, and BRONCOWheel is equipped with Calame rub lock tie rear, which is for public roads.
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
neither too much nor too little
SEROW225 WE (5MP) Purchased as a front brake disc for
I wondered how it would be at half the price of OEM, but the installation, dimensions, Material, Brake effectiveness, Brake Touch, everything was the same as OEM.
Originally, the OEM disc itself was just a cheap-looking piece of stainless steel plate that was cut out and beveled, so the appearance of this product feels perfectly fine.
It is really helpful to have out-of-print Motorcycle Parts at affordable prices.
I would use it again.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It's a crisp sound.
Disc Grinder/Impactetc., Footpeg Drill and other preparations.
If you are familiar with consolidated Gold objects, this is a great deal.
I chose it for the best adjustment of Material quality, price and piping routing.
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
SEROWDisc Plate
After installation, I did a FrBraketest and it was no different from the Normal plate&NormalPad, so it can be used.
Here is a comparison with this Disc Plate&DAYTONARed Pad
Braking distance and Brake Fee Ring are the same.
I am looking forward to seeing how it fares on the durability OffRoad course!
View detail
License bolt Green color
Beautiful. I like the color.
It was easy to install.
View detail
The price
Tucker required as a Large premise. not just a product to be covered.
Good fabric look and feel.
I'm not sure about the durability of this product.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100
Cheap and great.
Cheap!
Very good considering the price.
View detail
So so
I guess it's okay…
The hole position is different or…
Fitting is subtle des…
It is good if you are not particular.
View detail
Fits: HONDA SUPER CUB110, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50, SUZUKI LETS4, SUZUKI LETS4
Blue color is cool!
Because the color of the valve part is blue, if the light is not turned on when the car is parked, the entire car will be slightly blue.
It's so cool, it gives a futuristic look! Of course, it is a normal color when lit.
It's affordable and good looking, so it's a RECOMMENDATION! It's cheap, but it works!
View detail
Fits: HONDA LEAD110(EX), SUZUKI LETS(4Cycle), SUZUKI LETS4Basket, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50
Purchased with another Valve
It was too cheap. "Ha Gap. I bought a blue Valve for when I had a cold …
It's well made and I keep it as Spare after I'm done with it lol.
View detail
Normal is
This is a Universal Type Air Filter that you can cut yourself with Scissors or Cutter.
No particular problem. Normal The product is a product of Naturally, there is a time-consuming process to cut, so those who have trouble with this process
It is not possible to Recommendation to the
View detail