- Home
- Product reviews
- Motorcycle Parts
- Bodyworks
- Fairings
- Full Cowl / Exterior Set
- Very good complete set of plastic... (NBS JAPAN: Exterior (1 Set of 6-Items))
【NBS JAPAN】Exterior (1 Set of 6-Items) Review
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
เลี่ยมพลาสติกอย่างดีทั้งชุด
เกี่ยวกับคุณภาพและพื้นผิว
ชุดพลาสติกคุณภาพสูงสำหรับสกูตเตอร์ทั้งคันตัวยึดทั้งหมดนั้นเหมือนกับชิ้นส่วนดั้งเดิมทุกประการยกเว้นบางจุดจำเป็นต้องเจาะรูเพื่อติดตั้งจะงอยปากขนาดเล็กบนปากนกหลักรวมถึงรูสำหรับ เอาต์พุตของสายไฟไฟเบรกสปอยเลอร์ที่แก้มยางด้านขวา อย่างอื่นปกติดี ความเข้ากันได้อย่างสมบูรณ์และติดตั้งง่ายโดยไม่ต้องปรับแต่งและดัดแปลง
เกี่ยวกับความรู้สึกในการใช้งาน
หลังการติดตั้ง มีเพียงอารมณ์เชิงบวกเท่านั้น พลาสติกอย่างดี พอดีตัวและทาสีอย่างสวยงาม ไม่ผิดหวัง ในภาพคุณจะเห็นชุดนี้หลังจากแกะกล่อง เฉพาะฝาถังน้ำมันเท่านั้นที่ไม่รวมอยู่ในเฟรม
สินค้าที่ซื้อคู่กัน
พลาสติกทำสีครบชุดไม่ต้องซื้อเพิ่มทุกอย่างลงตัว
ความยากในการติดตั้ง
ติดตั้งง่าย แทนพลาสติกเก่า ตัวยึดเดิมทั้งหมดเข้ากันได้ 100%
ประสิทธิภาพด้านต้นทุนและการเปรียบเทียบกับผลิตภัณฑ์อื่น
ชุดพลาสติกต้นทุนต่ำ แต่ค่าขนส่งสูง เนื่องจากผลิตภัณฑ์นี้ใช้พื้นที่จำนวนมาก
เกี่ยวกับการจัดส่งและบรรจุภัณฑ์
บรรจุภัณฑ์ที่วางใจได้ในกล่องและวัสดุที่อ่อนนุ่มซึ่งไม่ทำให้การเคลือบพลาสติกเป็นรอย
ข้อกังวล ข้อควรระวัง หรือคำแนะนำใดๆ เมื่อซื้อ
โปรดทราบว่ามีรูขาดหายไปในผลิตภัณฑ์นี้ ต้องเจาะ 3 รู ------------------------------ --------------------------- เกี่ยวกับคุณภาพและพื้นผิว ชุดพลาสติกคุณภาพสูงสำหรับสกูตเตอร์ทั้งคัน ตัวยึดทั้งหมดเหมือนของแท้ รายละเอียดยกเว้นหลายจุดจำเป็นต้องเจาะรูเพื่อติดตั้งจะงอยปากขนาดเล็กบนจะงอยปากหลักรวมถึงรูสำหรับเอาต์พุตของ Stopsignal ของสปอยเลอร์ที่แก้มยางด้านขวา ส่วนอื่น ๆ ไม่เป็นไรเข้ากันได้อย่างสมบูรณ์ และติดตั้งง่ายโดยไม่ต้องฟิตติ้งและดัดแปลงความรู้สึกในการใช้งานหลังการติดตั้งมีเพียงอารมณ์เชิงบวกพลาสติกอย่างดีเหมาะอย่างสมบูรณ์และทาสีอย่างสวยงามไม่ผิดหวังในภาพคุณจะเห็นชุดนี้หลังจากแกะกล่องมีเพียงฝาปิดถังแก๊สเท่านั้น เข้ากรอบ ผลิตภัณฑ์ที่จะซื้อด้วยกัน ช่องพลาสติกทาสีเต็มช่อง ไม่ต้องซื้อเพิ่มเติม ทุกอย่างสมบูรณ์แบบ ความยากลำบากในการติดตั้ง ติดตั้งไฟแทนพลาสติกเก่า ตัวยึดเดิมทั้งหมดเข้ากันได้ ประสิทธิภาพต้นทุน 100% และการเปรียบเทียบกับผลิตภัณฑ์อื่นต่ำ ต้นทุนชุดพลาสติกแต่ค่าส่งสูง TC ผลิตภัณฑ์นี้ใช้พื้นที่จำนวนมาก เกี่ยวกับการจัดส่งและบรรจุภัณฑ์ บรรจุภัณฑ์ที่เชื่อถือได้ในกล่องและวัสดุที่อ่อนนุ่มซึ่งไม่ทำให้การเคลือบพลาสติกเป็นรอย ข้อกังวล ข้อควรปฏิบัติ หรือคำแนะนำใดๆ เมื่อซื้อ โปรดทราบว่าจำเป็นต้องมีการปรับแต่งในรูปแบบของรูที่ไม่เพียงพอสำหรับผลิตภัณฑ์นี้ ต้องเจาะ 3 รู สนับสนุนโดย Google Translator