Reviews
The classic MRA MRA Screen Racing
Was the one you received as per Image?
as pictured
Was the installation difficult?
Installation is easy
The Instruction Manual is also very helpful, so if you read it properly, you won't have any problems.
Since the screen is made of resin, do not over-tighten the bolt as this may cause damage.
The molding around the Screen is first inserted from the Start position, and then the molding around the Screen is inserted from the Bottom position.
Insert it into the crack of the braid to hold it in place, and then to the other side.
The split collar for Crimp is included, so check for any misalignment of the braid and make sure that the braid is in place.
If there is no problem, lightly tighten and crush with pliersetc.
Be careful not to exert too much force unnecessarily at this time, as it may destroy the Screen.
The braid is required for Japanese Vehicle Inspection Correspondence.
How was your experience with it?
I used it on my previous ride, a 2019 MT-09SP, and nothing has changed.
I think it is safe to assume that it is almost ineffective as a windbreak.
The MT-09 itself has a near-perpendicular riding posture, so if you want to avoid wind, you need to lean forward considerably.
[Color] I bought a Smoke, so I'll raise a picture of what it looks like from the inside, but I doubt many people will be driving around peeking through this gap...
What we are looking for in this product is Design and insect repellent.
Insects, in particular, will scatter around the Meter if you are not wearing this product.
This product has helped us a lot.
Coating the screen surface makes it easy to remove insects when washing the car.
Recommendation.
Design is my favorite of Screen's.
[Included Parts:were they on?
Includes mounting parts and the well-known MRASticker.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Bikini cowl changes the atmosphere
It is a little longer than OEM and the atmosphere changes by a Large amount.
I like it, although it only looks the same, because it doesn't change the wind protection effect at all.
View detail
Japanese Vehicle Inspection Correspondence
I bought it because I was using MRA's Screen and didn't have a mall.
Without it, the vehicle will not pass inspection.
I use clips at both ends without using any adhesives, and so far they have not come off.
View detail
highly effective
I decided to buy it after experiencing the pain at high speeds, and it would have been even better if the design had been a little snappier. The design could have been a little more sharp, especially the bottom edge near the headlight.
The effect of the installation was outstanding, and the fear of the body being stripped by wind pressure was gone.
View detail
Windproof effect is possible.
I wish the design was a little more attention to detail, but it works great, so that's good. Overall, it is a good product. View detail
Race ish look
Wind resistance has been reduced.
Race ish finish in appearance
View detail
MRA cb400 super boldor
Very good material delivery was fast from Japan to Singapore via EMS tracking, first time buying from webike Japan will definitely buy again if need accessories. View detail
I was worried about Zero gravity's CORSA.
I like the Logo because it has a high quality feel to it. I like the Logo because it is high quality and fits Exactly without any adjustment. View detail
BMW F800GT MRA ExScreen
If you replace the entire screen, the height will be too high and you will have to buy a new body coverretc.
I decided to purchase the ExScreen, and as a result, I didn't have to spend any extra money, and it only took me about 30 minutes to install it.
I completed the installation and drove on the highway right away, and the results were better than I expected.
Cost performance was good, and I think I made a good purchase.
View detail
[Color] Smoke? [Color] Which is correct?
Product photos are [Color] Looks like Smoke to me. [Color] Clear arrived.
In the case of Smoo, it took me about 3 months to get an email saying it would take a long time to deliver the product. [Color] I thought Smoke would deliver, which is correct?
It seems to be slightly quieter at about 120/km/h.
View detail
Completion of VARIO imitation
[How is it used?
CRF250M with Universal Screen and parts purchased from Amazon.com
Was the one you received as per Image?
I found it at a special price, so I wondered if there would be scratches, etc., but I was relieved to see that it was a good quality product. [Color] Smoke is moderate, and the included Windscreen Mole is nicely installed and high quality.
Was the installation difficult?
I drilled 4 holes for M6 bolts and made the bracket myself using aluminum rods and crimp terminals at the home center. It took a lot of care to get the center just right, but I think it turned out beautifully.
How was your experience with it?
It is lightweight, thick, and strong. If you use only this product, the wind will blow around your neck area, which may be difficult in the winter, so we added a cheap Variable Screen from Axxon.
View detail
Fits: YAMAHA Tricity155, YAMAHA TRICITY125 (BirdCity125), YAMAHA TRICITY155 (BirdCity155)
I wouldn't say it's an Extremely Large, but it's not bad.
I happened to find Screen Touring for BirdCity in stock, so I bought it and installed the gradation type in Smoked color on the Initial Model BirdCity125.
Bolt longer than the OEM bolt supplied with the product is used to raise the mounting position. NeoPlane Washer. Spacer of Sponge rubber called "Spacer" is inserted between the Bracket and the Screen.
Instruction Manual with 8mm height is Quantity:2pc. Set, 10mm is Quantity:2pc. It says that the set comes with different mounting holes at the top and bottom, but the one I received contained 1 pc. of 8mm and 3 pcs. of 10mm.
If it is too long, just shorten it, but I don't think it matters much because where there is a 2mm difference, the actual item looks like it is only a 1mm error, and in the end it will be crushed when the Bolt is tightened during installation.
The attached molding to the screen edge was not installed because the molding itself was hard and positioning it was troublesome.
Screen's [Color] Smoke, but you can see the road surface in front of the vehicle through the Screen.
In BirdCity's Riding position, there is no problem to choose Black if you are a Scooter, because you will not see through the Screen with your body face down.
The OEMScreen felt like it was snugly attached to the cowl, but with the use of the above mentioned Spacer, it was mounted to create a gap, and it seemed as if a draft might get in while driving, but this was not the case.
However, it is not longer than other external screens, so the windproof range is from the neck down.
I wear a full face helmet, but right after the Screen was installed, I felt the wind only under my chin and thought that the OEMScreen was just a Meter visor.
The rest interfered with the previously installed Hand guard.
Even with interference, Screen's Quantities:Pair (for Left and Right) The handlebar is thin only at the part where the handlebar is cut, and the hand guard itself is soft, so the handlebar can be cut into a quantity.:Pair (for Left and Right) It does not interfere with driving as the Guard only deflects slightly when turned fully off.
I think the other brand product of BirdCity that does not seem to interfere with the hand guard is this Screen or Asahi Windshield, but if I had to choose by design, it would be this one.
View detail
Mounted with MRA windscreen
About quality and texture I think it's bad because the price is cheap, but it's thicker than I thought and it's good. About the feeling of use It includes an auxiliary screen, so it's good to have windproof performance without position control. Products to buy together Difficulty of installation The installation is very easy, but the washer product is plastic, so I ordered a separate rubber washer. Cost performance and comparison with other products The design and cost-effectiveness are good compared to other products. About shipping and packaging The packaging is very well done. Any concerns, cautions, or advice when purchasing View detail
Short on the belt, that's good.
I also had a sitting height of 1m and an anchorage on Seat, so I was almost at Shield in NORMAL. Meter visor." Condition.
But you'd want to take it off in the middle of summer. Precipice. I am also a bit resistant to....
I decided to go with MRAScreen/Touring, which is a more modest number than GIVI and Pooh.
Personally, it was the right decision.
There is no gurgling wind cutting noise or wind entrapment, as was the case with the LongShield installed on other vehicles.
Wind pressure on the upper body is sufficiently reduced.
Since it is the same height as the OEMBack Mirror, it will probably pass inspection without modification.
However, if you are a tourer and want comfort on the highway, GIVIetc. with a higher height and a sloping back at the top end would be suitable for you.
Please note that the OEMHand guard is likely to interfere when fully locked.
View detail
Screen Mounting
Since it is black, it is naturally invisible when face down.
It is a little confusing because it is not a detailed instruction manual, but I was able to install it successfully.
I thought the with Rubber Nut on the OEM was easy to put on when new.
I applied silicon spray to the rubber part and screwed it in, but it may not be possible due to deterioration of the rubber, so it is recommended to prepare OEM in advance.
View detail
Parenthesis is good
Originally, the original Screen was halfway high, and because of my high seat height, it didn't make much sense to me.
I suppose I should use a taller Screen, but I don't want to look like an old man, and if I ride NAKED, I will be exposed to the wind.
That's how we ended up with this Screen.
Parenthesis is good, much better than Original.
Unfortunately, I have to return the original screen to the original one when I inspect the car (it is not tall enough), so I have to find the original screen I had stored away.
View detail
Improved wind protection effect and texture
I used to have a MRAScreen spoiler type (MRAScreen spoiler) on another Motorcycle. [Color] (Smoke), and since the windshield effect, quality, design, etc. were good, we installed it on the motorcycle in question as well. Since there was no screen spoiler type available, a touring type ( [Color] (Smoke). The difference I felt was that the end part of the screen did not bounce up, so the wind did not go up as much. The screen is a few centimeters longer than the OEMScreen, so there is more area that is not directly exposed to the wind, and the screen has been extended to the top of the electronic devices other than navigation (Radar etc.), so the wind is less likely to hit the RadarCase, making it easier to see.
We have not run in the rain, but we anticipate that the RadarCase will provide rain protection.
View detail
I can feel the effect at high speeds, but the installation...
Used for high speed touring and general road touring.
The screen itself has no problem in terms of strength and transparency (clear type), but there is something wrong with the bracket that is tightened together with the Handlebar Clamp.
I found it difficult to understand the English version of the Instruction Manual for installation, but when I temporarily fixed the bracket referring to the photo, the position of the tip of the bracket was too wide to match the position of the hole in the screen.
I think a GSX-S1000 type Handlebar Clamp would work because of the narrower clamp hole position in the front, but the name of the product is GSX-S750 17-" And it's like...
I had no choice but to bend it.
As a result, we were able to install it securely with no problems.
I did not request a replacement this time, so I cannot judge whether this is a normal product or not, but I hope this will help you to know that such things can happen.
But really, Instruction Manual is hard to understand, so you might want to work with a comfortable mindset.
View detail
OEMScreen was damaged.
I installed this on my 2012 CBR1000RR.
Small scratches on the OEMScreen were becoming noticeable and were replaced.
I think the shape is almost the same as OEM. [Color] Compared to the Smoke-sensitive OEM, this product [Color] The clear design allows for better visibility and recommendation. The installation is also an insertion type, which makes it easier to replace than OEM.
View detail
MRA Screen Spoiler
This Screen has been on board in the past. CBR900RR (96) I was happy to use it in the VF1000F2 one's business. "CBX750F2F BOL D’OR" I bought it as an experiment to see if it would fit on my car. the pictures on Net were very similar to the shape of both cars, so I took the plunge after a while of thinking about it. I was nervous for over 3 months before it came, but it was a perfect fit, so I am very happy with it. "CBX750F2F BOL D’OR" Since there is no Lineup for this vehicle, those who drive the same vehicle may want to try it out. However, like my vehicle, it has been over 35 years since it was manufactured, and both the former Owner and I "Standstill." Please note that there is a slight deviation of the Cowl Bracket in the View detail