Reviews
Without this guy, the air….
With this, you can easily inflate the air at the service station!
It is very useful because without it, the Inflator's large size can be unexpectedly strange!
Attach to CUB!
View detail
Used for Tire Replacement
Anyway, it's cheap!
I recommend it because it is a price that makes Tire replacement easy!
It's properly three for the price!
I am going to try to replace the Tire on the CUB110.
View detail
Replaced with Tire Replacement
Used on front and rear Tire of ADDRESSV125GLIMITED.
In particular, Front tire is now at L because NORMAL is Straight, and Inflator is easier to use.
View detail
D Rear tire replacement D for Tracker 125
I purchased the Rim Band and Tube at the same time to replace the rear tire on my D Tracker 125. Since I do the Tire replacement myself, I only have to pay Gold for the parts. I bought it from WeBig because they had the best price! 。 Discarded Tires are picked up at Motorcycle Parts stores for a fee. View detail
Flexible and good
Used to replace front and rear Aluminum WheelTires on Addressv125g.
It is flexible, yet just the right thickness and large enough to replace the rim without damaging it.
The rim protector with a string attached that I bought from a certain NetShop broke after one use while installing a Brand New Tire, the string attachment part broke and fell inside the Tire, and I had to take the Tire off and on once more.
This product does not have such concerns.
Durability remains to be seen.
View detail
It can be used with confidence
I used it for my MONKEY.
Tubeless tires are installed by modifying KITACO's matching wheels. I wanted to use Straight Type, but it was difficult to inject air into the wheel due to the space.
Of course, there are no air leaks.
To install, instead of forcibly pushing it into place with a screwdriver, spray it with silicon spray, insert the HEXWrench into the hole on the reverse side of the rubber, and push it into place easily without damaging the rubber.
View detail
CT110 HUNTER CUBCTube also replaced when replacing Tire on CT110
CT110 HUNTER CUBCWhen we replaced the Tire on the CT110, we also replaced the Tube together. View detail
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure. - An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure.
- An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special air plug (1/4 taper screw) is required for 200kPa.
Please ask for an air plug (46747th grade) after checking the size of the hose socket currently used.
The air type which a compressor is used, is quick as for the inflator of a tire, and is made simply.
With T type attachment, use on almost all two-wheel barrows is possible.
Measurable range: 0~700kPa / 0~100-psi dual display.
View detail
Easy to use
The tip is thin and strong and the Grip is easy to hold so it is easy to apply force.
The lever itself is of moderate length and of very high quality, so it can be easily attached and detached from the wheel to the tire.
The quality of the product is Number One.
View detail
KTC Tire Lever
I could not get the tire to fit in the lever made by another company, but it fit easily in this one. What's the difference?
It is the thinness of the spatula part. The thin spatula takes up 1/3 of the total length. That's a good thing.
The more Bead in the Tire, the narrower the Pitch to insert Lever from the remaining 1/3 of the Tire.
I want to insert it right next to the lever I'm holding down, but it's too thick to fit in another company's lever.
Thinness is justice when it comes to tire levers. I think the strength of a manufacturer specializing in tools is that they are able to ensure the strength of their products.
People who change tires by themselves should definitely use this.
View detail
A must-have for Tire replacement.
I have three of them. If you have that many, you can reassemble them without any problem. View detail
KTC is the best choice for Tire Lever
I lost the one that I was using, so I bought it again.Tire lever comes out from various manufacturers, but this one of KTC has good balance in both price and performance. It is thin and the tip is bent to be suitable for tire replacement. If I lose it again, I will buy the same one. Crying 。 View detail
It's an easy lever to put effort into.
The tip is thin and strong and Grip is easy to hold and force. KTC is the best in terms of quality. View detail
Very easy to use tip shape and thinness
This is the easiest to use among these Tire Lever models, along with TSK's
It's one of those things.
I bit a tube when I did Puncture on the road and I couldn't help myself.
I've been there, and I'm not sure how much I would have liked to have this Lever at the time.
I can't tell you how much this means to me.
Quantity as well as for garage use and for carrying tool bags:2pc more
I bought it (laughs).
It may seem like a high price for a Tire Lever, but it's easy to use and
It makes sense when you consider the efficiency of the work.
View detail
The best
I think this and TSK are the twin pillars of the Spoon type Tire Lever... in the middle of the Spoon. There is a step for scratching to prevent Lever from getting too much in when it wakes up. is done. That means it's great for replacing tube tires. Because it induces biting. I think it's a great Lever that has been further imp lubeed after thoroughly researching other products. View detail
No complaints, excellent items
? 【What made you decide the purchase?】 It is stated that the tip is thin by imprint. I was looking for a thin and easy to use Lever.
? 【How was it actually used?】 It is considerably thinner than Lever of about 1 to 2000 yen. Moreover, it is strong.. Lever with a thick tip needs to be inserted all the way in, so it is easy to chew Tube, but it is very easy to use.
? [Is there anything I was disappointed about?] Nothing in particular.
? [Request to Manufacturer - Please tell me if there are any improvement points】 Grip is good because black is not so noticeable dirt but Red or Color Grip is good.
? 【Have you compared items?】 There is none
? [Others] We will have a reasonable price, but the Air leaked from the Tire that we built together. Because there are many people using a high Heavy tube because it opens a hole in the Tube. Although it is hard to chew a thick part, if you use this Lever of a thin tip, you can assemble without chewing even with an ordinary cheap Tube. In addition, please correct the hole of Tube and Tube - - If you are an experienced person, I will Recommendation to use. The pair is also comfortable.
View detail
Very easy to use
Until now Tire Lever used the unnamed overseas Manufacturer as if it were the same
This idea was a mistake.
Ease of work is completely different.
Although I might not think about replacing Tire Lever at all, if there is opportunity
We recommend you to replace with Lever.
View detail
It's neither good nor bad.
It's Tire Lever so it does not change much with other things, but it did not hurt Rim and it was nice and easy to use.
In addition, Quantity : I think that it is better to buy it with 2pc.
View detail
Because it has a good reputation...
I used DAYTONA's Tire Lever, but many people have a good reputation [KTC MCOL-206] I bought three of them.
It's clumsy, but I only want to use good tools... (Because the tool is also a hobby)
I have not used it, but I think that the impressions I tried are the same as you.
View detail
Tire Lever
In the past I was exchanging the Tire with cheap Tire Lever, but I thought that the tip was thick and it was painful not to get into the gap well. After that the reputation of Tire Lever here is eloquent so if you buy it and use it it makes it completely different and easy to use, I wanted another one and decided to purchase this one.
I can work quite efficiently, so I will recommend it to those who will exchange Tire by myself.
View detail