Reviews
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure. - An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure.
- An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special air plug (1/4 taper screw) is required for 200kPa.
Please ask for an air plug (46747th grade) after checking the size of the hose socket currently used.
The air type which a compressor is used, is quick as for the inflator of a tire, and is made simply.
With T type attachment, use on almost all two-wheel barrows is possible.
Measurable range: 0~700kPa / 0~100-psi dual display.
View detail
Easy to use
The tip is thin and strong and the Grip is easy to hold so it is easy to apply force.
The lever itself is of moderate length and of very high quality, so it can be easily attached and detached from the wheel to the tire.
The quality of the product is Number One.
View detail
KTC Tire Lever
I could not get the tire to fit in the lever made by another company, but it fit easily in this one. What's the difference?
It is the thinness of the spatula part. The thin spatula takes up 1/3 of the total length. That's a good thing.
The more Bead in the Tire, the narrower the Pitch to insert Lever from the remaining 1/3 of the Tire.
I want to insert it right next to the lever I'm holding down, but it's too thick to fit in another company's lever.
Thinness is justice when it comes to tire levers. I think the strength of a manufacturer specializing in tools is that they are able to ensure the strength of their products.
People who change tires by themselves should definitely use this.
View detail
A must-have for Tire replacement.
I have three of them. If you have that many, you can reassemble them without any problem. View detail
KTC is the best choice for Tire Lever
I lost the one that I was using, so I bought it again.Tire lever comes out from various manufacturers, but this one of KTC has good balance in both price and performance. It is thin and the tip is bent to be suitable for tire replacement. If I lose it again, I will buy the same one. Crying 。 View detail
It's an easy lever to put effort into.
The tip is thin and strong and Grip is easy to hold and force. KTC is the best in terms of quality. View detail
Very easy to use tip shape and thinness
This is the easiest to use among these Tire Lever models, along with TSK's
It's one of those things.
I bit a tube when I did Puncture on the road and I couldn't help myself.
I've been there, and I'm not sure how much I would have liked to have this Lever at the time.
I can't tell you how much this means to me.
Quantity as well as for garage use and for carrying tool bags:2pc more
I bought it (laughs).
It may seem like a high price for a Tire Lever, but it's easy to use and
It makes sense when you consider the efficiency of the work.
View detail
The best
I think this and TSK are the twin pillars of the Spoon type Tire Lever... in the middle of the Spoon. There is a step for scratching to prevent Lever from getting too much in when it wakes up. is done. That means it's great for replacing tube tires. Because it induces biting. I think it's a great Lever that has been further imp lubeed after thoroughly researching other products. View detail
No complaints, excellent items
? 【What made you decide the purchase?】 It is stated that the tip is thin by imprint. I was looking for a thin and easy to use Lever.
? 【How was it actually used?】 It is considerably thinner than Lever of about 1 to 2000 yen. Moreover, it is strong.. Lever with a thick tip needs to be inserted all the way in, so it is easy to chew Tube, but it is very easy to use.
? [Is there anything I was disappointed about?] Nothing in particular.
? [Request to Manufacturer - Please tell me if there are any improvement points】 Grip is good because black is not so noticeable dirt but Red or Color Grip is good.
? 【Have you compared items?】 There is none
? [Others] We will have a reasonable price, but the Air leaked from the Tire that we built together. Because there are many people using a high Heavy tube because it opens a hole in the Tube. Although it is hard to chew a thick part, if you use this Lever of a thin tip, you can assemble without chewing even with an ordinary cheap Tube. In addition, please correct the hole of Tube and Tube - - If you are an experienced person, I will Recommendation to use. The pair is also comfortable.
View detail
Very easy to use
Until now Tire Lever used the unnamed overseas Manufacturer as if it were the same
This idea was a mistake.
Ease of work is completely different.
Although I might not think about replacing Tire Lever at all, if there is opportunity
We recommend you to replace with Lever.
View detail
It's neither good nor bad.
It's Tire Lever so it does not change much with other things, but it did not hurt Rim and it was nice and easy to use.
In addition, Quantity : I think that it is better to buy it with 2pc.
View detail
Because it has a good reputation...
I used DAYTONA's Tire Lever, but many people have a good reputation [KTC MCOL-206] I bought three of them.
It's clumsy, but I only want to use good tools... (Because the tool is also a hobby)
I have not used it, but I think that the impressions I tried are the same as you.
View detail
Tire Lever
In the past I was exchanging the Tire with cheap Tire Lever, but I thought that the tip was thick and it was painful not to get into the gap well. After that the reputation of Tire Lever here is eloquent so if you buy it and use it it makes it completely different and easy to use, I wanted another one and decided to purchase this one.
I can work quite efficiently, so I will recommend it to those who will exchange Tire by myself.
View detail
Reliable Tire Lever
I started to do liter Class Tire hands on my own, initially for Large Small Tire Lever for Vehicle
Even though I was using it, I was able to do it for sure, but I made this Lever so the working efficiency got higher with Gun.
Even with RimProtector, even in a small gap between Protector and Tire
It is easy to slip in and it is easy to slip out even when inserted further.
The thinness, rigidity and shape of the tip are exquisite.
If it is slightly thick or if the Curve is too steep, it will be difficult to get in and out as soon as it is done.
And it takes extra time by doing grinding Lever, at the worst it will scratch Rim.
Strong rigidity is wonderful.
If it is inexpensive Lever "Does Lever turn?" Even in the case of applying loads that worry about,
Because this Lever has a flat face, we will apply a load with confidence and challenge the final phase of Tire exchange work.
Lever seems to bend along the way, I never thought that the tip seemed to crack with Parkin.
Rubber Material of the hand and good shape are spurring it.
Especially people who do not want to scratch Wheel think that combination of RimProtector and this KTCLever is an essential part.
The other day, I just encountered a difficult Tire that seems to be unreasonable and abandoned
This Lever got me over it. I could not do it without this Lever.
I appreciate it..
View detail
Very easy to use.
The flat part of Grip works very well when fixing with the foot, and the previous part is also very easy to use. I think that it is a well-thought tool. I am worried about buying another pc. View detail
Although the Tire lever was already owned, it newly purchased by the addition.By the picture, although it may be unclear, compared with other Tire levers, as for the Tire lever of KTC, the rack portion at the tip has become more gently-sloping.
Although the Tire lever was already owned, it newly purchased by the addition.By the
picture, although it may be unclear, compared with other Tire levers, as for the Tire lever of KTC, the rack portion at the tip has become more gently-sloping.
When inserting a Tire lever by the difference in this curve, inserting in a Smooth is more possible than other Levers.There is a time of a Lever plug stopping succeeding at the time of
Tire desorption.It is certainly then helpful.
Even when it already has a Lever, the Recommendation of adding this one is carried out by all means.It worries about whether for it to be user-friendly and to make all this.
View detail
what has a good Lever -- the Tire lever made from KTC was chosen by saying. since a Tire lever besides has not been used, the comparison of a using feeling cannot be performed, but it is very easy to carry out tire replacement -- a Lever --
what has a good Lever -- the Tire lever made from KTC was chosen by saying.
since a Tire lever besides
has not been used, the comparison of a using feeling cannot be performed, but it is very easy to carry out
tire replacement -- a Lever -- dissatisfaction -- it is absolutely none.
A crack is hard to go into a Wheel by structure also with a beautiful portion of the
Lever.
It seems that it is completely different although the cheap Lever was also seen.
Form is also often ? again.
Since it was big-ticket, it wavered, but rather than damaging a Wheel was thought and it purchased.
Two of this Lever are used in the case of
tire replacement.
View detail
[Webike Monitor] Since grip portion was resin, even if it made it bend strongly, it has worked without difficulty. As the form of the portion hung on a previous Tire had a Know-how again, it was very easy to remove a Tire.
[Webike Monitor] Since
grip portion was resin, even if it made it bend strongly, it has worked without difficulty.
As the form of the portion hung on a previous Tire had a Know-how again, it was very easy to remove a Tire.
View detail
[Webike Monitor] The picture becomes the comparison with the thing made from a Professional tool. picture top becomes a thing of KTC.Although I think whether user-friendliness changes if it only uses once [ honest ] although the Tire was
[Webike Monitor] The
picture becomes the comparison with the thing made from a Professional tool.
picture top becomes a thing of KTC.Although I think whether user-friendliness changes if it only uses once [ honest ] although the Tire was replaced this time [
] using these two, the direction of the thing of KTC has the good texture of a Plating too obviously.I think that
KTC can be used as a thing throughout life.
, of course, user-friendliness is also the highest.I consider [ being just going to change by the way and skill which are in fashion in whether the
Wheel is damaged, and ].
View detail
The Lever of the ordinary Bar type was used until he bought this. a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a usual Type, -- when the worst, it is a crack to a Tube -- there w
The Lever of the ordinary Bar type was used until he bought this.
a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a
usual Type, -- when the worst, it is a crack to a Tube -- there were also things very.
Work became really easy after using
, however this.
Since the tip is thin, it is easy to make it slide in first.
It is easy to grasp
and a Grip, and die length is also right just and it is easy to put in power.
Since it is not necessary to cut a Tube with this price and considering
workability working hours can also be shortened substantially, he buys it and is Satoru Taisho.
When this is used, it is like [ which he would like to use the usual Bar type and is lost ].
It is one of the tools to certainly put on the Garage.
I think again that this price is also more enough as the sense of security of KTC than anything.
View detail