Reviews
Thin and easy to use.
I used to use Home center, but this KTC is thin and easy to use. View detail
Easy to use and safe
I have used various Tire Lever and the handle and tip spatula are just right in bend and thickness.
Surprisingly, some large handles can cause palm pain, but this is a safe and easy-to-use product.
View detail
Easy to use
[How is it used?
I bought this because I use it on MotorcycleMain. The angle is easy to use.I use it on Motorcycle, car and bicycle.Mothers' bicycle is no good.
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use.
[Points to note]
FLOVAL PROStyleTool Quick coupling One-touch type O-Screw Plug 20PMA Applicable O-Screw (R) 1/4
You have to buy these things separately to use them.
How did it compare to other products?
Memory is easy to read
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
20PMA Applicable O-Screw (R) 1/Quantity:4 Why don't you put it on and sell it as a Set?
View detail
Keep one for now.
Easy to use, Basic and one of a kind Items to have.
It is as easy to use as DRC's heavy Tire Lever, KITACO's regular Tire Lever, and a domestic Tire Lever with a smooth tip whose name I forget.
View detail
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure. - An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure.
- An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special air plug (1/4 taper screw) is required for 200kPa.
Please ask for an air plug (46747th grade) after checking the size of the hose socket currently used.
The air type which a compressor is used, is quick as for the inflator of a tire, and is made simply.
With T type attachment, use on almost all two-wheel barrows is possible.
Measurable range: 0~700kPa / 0~100-psi dual display.
View detail
Easy to use
The tip is thin and strong and the Grip is easy to hold so it is easy to apply force.
The lever itself is of moderate length and of very high quality, so it can be easily attached and detached from the wheel to the tire.
The quality of the product is Number One.
View detail
KTC Tire Lever
I could not get the tire to fit in the lever made by another company, but it fit easily in this one. What's the difference?
It is the thinness of the spatula part. The thin spatula takes up 1/3 of the total length. That's a good thing.
The more Bead in the Tire, the narrower the Pitch to insert Lever from the remaining 1/3 of the Tire.
I want to insert it right next to the lever I'm holding down, but it's too thick to fit in another company's lever.
Thinness is justice when it comes to tire levers. I think the strength of a manufacturer specializing in tools is that they are able to ensure the strength of their products.
People who change tires by themselves should definitely use this.
View detail
A must-have for Tire replacement.
I have three of them. If you have that many, you can reassemble them without any problem. View detail
KTC is the best choice for Tire Lever
I lost the one that I was using, so I bought it again.Tire lever comes out from various manufacturers, but this one of KTC has good balance in both price and performance. It is thin and the tip is bent to be suitable for tire replacement. If I lose it again, I will buy the same one. Crying 。 View detail
Ease of use is good
Because I got Air compressor, first of all, I bought this product which can do Check and Inflator of air pressure together with Air gun of standard. When I start to be particular, there is a thing of about 20,000 yen only in the air gauge, but because it is no use to arrange everything with such a first-class product suddenly.
The long neck and easy to read air gauge are great for motorcycle use. The long neck construction is convenient for motorcycle use and the easy to read air gauge is a plus.
To the Impreza. "The Hose was bent at an impossible angle. I was curious about this, but I have the impression that it won't happen unless you're very unlucky. I didn't have any problems with it.
What I was more interested in was the Included Parts:. It's been mentioned in other people's impressions. "Quarter to 20 PM." The TAB coupler is not included. If you think about the popular compressor, you can just put this size coupler from the beginning, but why they sell it separately is a mystery. It costs about 250 yen per one, but I hope the manufacturer will install this size coupler from the beginning, because basically all aerodynamic tools for motorcycle maintenance use this size coupler.
View detail
สินค้าไม่สมกับของญี่ปุ่นเลยเลยงานขัดไม่ละเอียดหยาบมาก และหัวที่งัดก็เล็กและหนาองศางอก็น้อยสินค้าไม่สมกับของญี่ปุ่นเลยเลยงานขัดไม่ละเอียดหยาบมาก และหัวที่งัดก็เล็กและหนาองศางอก็น้อย View detail
Product Concept is good....
I bought it because I couldn't find any other similar products and it looked convenient.
When I received the product and opened the box, the Hose was bent over as shown in the picture.
It seems to be because it is packed too small for the body.
When I requested a defective replacement, the Manufacturer's response was It's safe to use. And
I didn't give up and sent out the Objection again and they responded that they had checked their inventory and all of them were in the same condition and wanted to handle it by returning it.
The product itself seems to be easy to use and is very disappointing as there is nothing else in a similar price range to change.
It may be difficult to deal with, as it appears to be an imported product.
I think it's a waste of time when you can prevent it by just making the packaging one more sizeable.
Right now, all of the inventory in the DAYTONA warehouse is no good.
Unless you're a person who doesn't mind as long as it's cheap and you can put air in it anyway, it's probably best not to do so.
I can tolerate a bent-over habit, but a broken Hose is just not very useful.
I had it Cancellation processed because it was impossible for it to be new and broken before that.
View detail
It's an easy lever to put effort into.
The tip is thin and strong and Grip is easy to hold and force. KTC is the best in terms of quality. View detail
Compact and easy to use.
Tire Lever is not long enough. Even if it is short, the angle is good, so it is easy to use the Tire Lever to get power. View detail
Very easy to use tip shape and thinness
This is the easiest to use among these Tire Lever models, along with TSK's
It's one of those things.
I bit a tube when I did Puncture on the road and I couldn't help myself.
I've been there, and I'm not sure how much I would have liked to have this Lever at the time.
I can't tell you how much this means to me.
Quantity as well as for garage use and for carrying tool bags:2pc more
I bought it (laughs).
It may seem like a high price for a Tire Lever, but it's easy to use and
It makes sense when you consider the efficiency of the work.
View detail
The best
I think this and TSK are the twin pillars of the Spoon type Tire Lever... in the middle of the Spoon. There is a step for scratching to prevent Lever from getting too much in when it wakes up. is done. That means it's great for replacing tube tires. Because it induces biting. I think it's a great Lever that has been further imp lubeed after thoroughly researching other products. View detail
The best Tire Lever I've ever had!
First of all, the ease of use is the best compared to the Tire Lever I've had
It was easy to get into the gap between the rims, and when I put the Tire in after it was replaced, it went in without difficulty
I only bought 1 pc as a trial, so next time I order, I'll be able to get more Quantity:I would like to have about 2pc
The one drawback is the high price I don't know if it's cheaper in terms of TotalCost without just canning the tube and making it puncture Okay?
View detail
One of the easiest levers to use
At first we used a cheap Tire Lever from Straight and Daytona etc I was there, but Race's seniors and friends at the supply store
I bought TSK and this KTC Lever after hearing about it from
It is true that the tip is thinner than that of the less expensive competitors, but the strength is also ensured, and this thinness, shape and Grip's Thanks to this, it became easy to work on the Large change
View detail
It is easy to use
I bought this forged Tire Lever because the tip of the Chinese Tire Lever purchased in the jungle broke The thickness and shape of the tip are exquisite and the feeling of use is also good View detail
Easy to use as it is for Motorcycle
Although other people are also written, it should be attached to the connection to Coupler
The trouble of going over to the home center is to make the convenience which can be ordered with Net unnecessary
View detail