Reviews
Without this guy, the air….
With this, you can easily inflate the air at the service station!
It is very useful because without it, the Inflator's large size can be unexpectedly strange!
Attach to CUB!
View detail
Used for Tire Replacement
Anyway, it's cheap!
I recommend it because it is a price that makes Tire replacement easy!
It's properly three for the price!
I am going to try to replace the Tire on the CUB110.
View detail
Cheap! Cheap anyway!
Anyway, it's cheap!
It is the cheapest Rim Band and fulfills the functions!
When replacing the Tube, the price is low and the replacement is safe!
View detail
Replaced with Tire Replacement
Used on front and rear Tire of ADDRESSV125GLIMITED.
In particular, Front tire is now at L because NORMAL is Straight, and Inflator is easier to use.
View detail
Fits: YAMAHA Spark R, YAMAHA Spark 135, YAMAHA RZ50, SUZUKI WOLF50, SUZUKI RG50γ, SUZUKI RAIDER R150, HONDA SUPERDREAM110, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA WAVE125, HONDA CT125 CT110 HUNTER CUB, HONDA WAVE110, HONDA CBR150R, HONDA CBR125
Introduced this time with the understanding that it is Overspecifications (Rear ed.)
[Exchange history].
The SUPER CUB110 is 10 years old, but the mileage is less than 5000 km, and of course the tires had never been replaced yet, so this was the first time to do so.
I have only ridden sports type motorbikes, so I don't rely on tires for business motorcycles, and I know they are overspecifications, but I chose Bias' strongest tires for this project.
Rear is also implementing Chain exchange at the same time this time.
Comparison with the condition of increased weight and resistance since the Chain was replaced from Chain without Seal to Chain with Seal.
Cautions for exchange
I had prepared to replace the 10 year old Tube just in case it needed to be replaced, but did not use it this time.
The hand-assembled Image is a Tire that is slightly stiff on the side wall and very soft on the ground surface.
Bead seems to rise easily even without much air pressure, giving the impression of softness overall.
FirstImpression
The weight of the Tire has been increased, and the weight of the push/pull feels larger, but on the other hand, it feels lighter once it is pushed out, or perhaps it is a sense of resistance. Is it inertia?
I am afraid of a situation where the Rear brake tends to lock up in a Rear brake-centered CUB because it causes the braking distance to increase, but to be honest, that has not changed.
However, since the grippy feeling is transmitted firmly, it is easier to clearly detect when braking from high speeds that the car is about to lock.
The Rear also has a pointed Profile that makes it light to lay down and easy to maintain posture during banking.
The OEMTire was not stable in the lying position, on the contrary, it would have been light and easy to handle at low speeds, but the Q-Lite is of course outstandingly stable when the pace is increased.
Life seems to be short, but I don't drive that many miles to begin with, so again, the time for replacement is likely to come in years.
View detail
Fit to Rim
Fit feeling to the rim is also good. It can be tightened.
I happened to find this product and bought it.
I think it was good.
Installation is no problem, just insert the Bolt when fitting it.
I hope it works for mud intrusion and such.
It looks beautiful and I recommend it.
View detail
D Tracker 125 rear tire replacement
I purchased this tire to replace the rear tire on my D Tracker 125. I always buy this tire because it is a special tire for D Tracker 125, and when I replace the tire, I also replace the Rim Band and Tube. I purchased the Tire, Tube, and Rim Band at the same time for the lowest price from Webig. (Free shipping too). View detail
D Rear tire replacement D for Tracker 125
I purchased the Rim Band and Tube at the same time to replace the rear tire on my D Tracker 125. Since I do the Tire replacement myself, I only have to pay Gold for the parts. I bought it from WeBig because they had the best price! 。 Discarded Tires are picked up at Motorcycle Parts stores for a fee. View detail
D Tracker 125 rear tire replacement
I purchased these tires and tubes for my D Tracker 125 when the time came to replace the rear tires. I don't know how durable they are, but when I replace the tires, I always replace the rim band and tube as well. I bought it because Webig's price was the cheapest for replacing them all together. I am replacing the tires myself, so it will be cheaper. View detail
Flexible and good
Used to replace front and rear Aluminum WheelTires on Addressv125g.
It is flexible, yet just the right thickness and large enough to replace the rim without damaging it.
The rim protector with a string attached that I bought from a certain NetShop broke after one use while installing a Brand New Tire, the string attachment part broke and fell inside the Tire, and I had to take the Tire off and on once more.
This product does not have such concerns.
Durability remains to be seen.
View detail
IRC MB10 3.50-6Tire Stable 6-inches Tire
I have been using this tire since I built my 6InchMONKEY about 20+ years ago. This time I replaced the Rear tire because of SlipSign. My 6InchMONKEY started with a 75cc Bore up, then 85cc, and now it is running on a Chinese 86cc engine. I don't feel any particular problem with the grip and rain performance. I feel that the grips are rather good, and due to the size, the wear is a little faster than the 8Inch, or maybe at the same etc. level. However, since it is lighter in weight, straight line stability tends to deteriorate a little. It is a little hard on the hips when touring more than 100 km one way. Above all, I just want to thank you for continuing to make this product and providing stable performance. Please keep up the good work. View detail
It can be used with confidence
I used it for my MONKEY.
Tubeless tires are installed by modifying KITACO's matching wheels. I wanted to use Straight Type, but it was difficult to inject air into the wheel due to the space.
Of course, there are no air leaks.
To install, instead of forcibly pushing it into place with a screwdriver, spray it with silicon spray, insert the HEXWrench into the hole on the reverse side of the rubber, and push it into place easily without damaging the rubber.
View detail
CT110 HUNTER CUBCTube also replaced when replacing Tire on CT110
CT110 HUNTER CUBCWhen we replaced the Tire on the CT110, we also replaced the Tube together. View detail
Used for CT110 HUNTER CUBCT110
CT110 HUNTER CUBCThis was replaced when the Tire was replaced on the CT110 HUNTER CUBCT110. It is a very normal Rim Band. View detail
I put it on with color matching.
Spacer is Quantity for other companies.:1 Set of 2pcs., Tower is Quantity:1 Set of 2pcs. This is because Spacer and Tower are sold in Quantity:It is sold in sets of one and is cosmetically pleasing.
It is a self-satisfying product, but I am self-satisfied!
View detail
Thank you very much
I have just received the product.
Thank you for your very good response.
We look forward to working with you again next time.
View detail
เป็นยางที่สวยงามใส่แล้วลงตัวยึดเกาะถนนได้ดีมาก View detail
One point of Wheel
Easy one point on the wheel and big bore piston shape.
However, there is a problem.
The valve part is made of yellow copper (copper alloy gold) and this product is made of aluminum alloy gold, which means that the screws are made of different types of gold. This will damage the screw threads of the Valve in the worst case.
One of the measures to prevent this is to apply silicone grease to the capscrew cap to protect it from electrical corrosion, considering that the O-ring is attached to the back side of the air valve cap.
Silicone grease must be applied, otherwise it will not stick. This will make it easy to achieve one point on the wheel.
View detail
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure. - An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special
daytona: -- DAYTONA:air inflater (inflator for compressors) product number: -- diameter of 41767 description-of-item meter panel: -- please use it with 700 or less kPa of phi50 * working pressure.
- An about 2.00 kgf/cm21 kgf/cm2=98.0665kPa - special air plug (1/4 taper screw) is required for 200kPa.
Please ask for an air plug (46747th grade) after checking the size of the hose socket currently used.
The air type which a compressor is used, is quick as for the inflator of a tire, and is made simply.
With T type attachment, use on almost all two-wheel barrows is possible.
Measurable range: 0~700kPa / 0~100-psi dual display.
View detail
Easy to use
The tip is thin and strong and the Grip is easy to hold so it is easy to apply force.
The lever itself is of moderate length and of very high quality, so it can be easily attached and detached from the wheel to the tire.
The quality of the product is Number One.
View detail