Reviews
Good quality, good price
Old rim lock disintegrated and needed a new one. This is almost identical to stock and fit exactly as it should.DRC rim lock is as good as any other rim lock. It weighed considerably less than what I was expecting.I always choice zeta, really quality parts and the best price Easy install but make sure you balance you wheels. View detail
Anyway, it was hard.
The CT125 Rear tire GP-5 has 2,0mm left, so I'll change it after a few more runs, but I'm running a GWCampaign, so I'll buy the Tire while I can, and I'm in the On 9, Dirt 1 ratio here, so not completely On road, I decided to go Adventure oriented.
So, after much deliberation with the well-reputed Anakee STREET, I decided to go with D604, which has no Reviews at all, as I am a minority, and write my first Review.
In a review by a certain Large River in South Brazil, the only negative image was that it was hard and vibrated.
After touching the one that arrived at my house for a bit, I was prepared that it would be hard and tiring, as it reminded me of the T63 thing from company M.
Now, when I got it in my hands with the usual Pattern, I already wanted to replace it, and I had planned to replace it next month, but I started to do so (laughs).
As you might expect, there is a direction of rotation for installation, so we carefully checked the direction of rotation before starting work.
This is my first time to replace Tire on CUB, but I will follow the theory here.
The GP-5 has a soft bead and was relatively easy to remove.
Now, let's start the assembly.
As usual, apply a generous amount of Bead wax.
Unlike off-road vehicles, we do not want to scratch the rim, so we use rim protector while working.
It's already hard even to fit the first time!
Fit the One Side and put in the Tube. These are not so fiddly.
Turn it over and put the other side in, but it is hard anyway!
After fitting half of the wheel, I held it down with my foot and lever it in, but the remaining 20cm or so was tough!
The installation was done carefully, boldly, and by brute force.
We managed to complete the work without any holes in the tube and with a clean rim.
I ran the car for a while, and it is true that the slight vibration from the Rear has increased, but it is not at a Level that bothers me that much.
Grip is often seen as such and such, but well, it is a CUB, so it can run and stop normally.
We don't ride in the rain, so as long as the dry grip is good, it's fine!
The groove is somewhat larger than GP-5, and the block is also larger, but the tread surface and SIDE are harder, so I think it is easy to be played on the dirt.
Muddy terrain is likely to Stack if not driven well, but the CUB does not have that kind of driving ability to begin with.
If you are used to working on CUBs with Spoke wheels, and if you are used to working on them, and if you drive in an adventurous manner, recommendation.
I thought that GP-5 would be easier to work with when Puncture was done, and that in the end the standard Tire would be the best. I thought that the standard Tire would be the best in the end.
View detail
DUNLOP Dunlop Rim Band [17in.
The one that was installed when the car was delivered was replaced for the first time.
If the Rim Band is damaged, it can lead to puncture, and since it is not expensive, it seems to me that it should be replaced every time the Tire is replaced.
View detail
Just the Right Quantity for Tire Replacement:Set
[How is it used?
I purchased this product to replace a SUZUKI/CHOINORI Tire.
This is the first time for me to exchange Tire by myself.:Set.
Was the one you received as per Image?
It was just as Image.
This Quantity:In addition to the Set, Air Valve Puller and Tire wax were additionally purchased.
How was your experience with it?
It was my first time to replace the tires.:Thanks to Set, we were able to successfully replace the Tire.
Lever was also Simple and easy to use, but Quantity:2 pcs is a little short, so I wanted to get another Lever with an irregular shape.
[Points to note]
I was careful not to damage the rim with the lever when replacing the tire.
How did it compare to other products?
There was also a Tire Lever from another manufacturer, but I thought this product would be sufficient since the frequency of tire replacement is not that frequent.
View detail
Thin Socket required
Used on Ninja ZX-25R.
In addition to replacing the Tire by hand, we replaced the Valve with an L-shaped Valve.
It may be just Kawasaki, but the installation is tough.
The hole diameter for the Valve of OEMWheel is too narrow to use the Socket of normal Tool.
I tighten a 14mm nut, but the wheel hole diameter is probably less than 19mm and the socket will not fit.
I measured the outer diameter of the Socket and it is about 20mm.
It is impossible to tighten without using a thin 14mm Socket with an outside diameter of 19mm or less.
I had no choice but to lightly fix the Nut with Spanner without turning the Nut and turn the L-shaped ValveBody to tighten it.
When tightening, a thin layer of silicon grease must be applied to the rubber portion of the valve, otherwise the rubber will be twisted and deformed.
Note that if the Rubber is twisted and deformed, it can cause air leaks.
I was forced to prepare a small socket with an outer diameter for the next work, so I looked around on the Net for a lot of things.
I had no choice but to purchase a 14mm plug socket with an outer diameter of 18mm because there are no normal thin sockets available.
View detail
First of all, it is a sense of security!
I recently replaced it with a new one, and compared to the previous competitor's product, it is more natural and easier to ride on.
I have experienced it in dry, wet and the other day touring and had no problem with the stability.
If Pattern likes it, it is totally possible!
I don't know how much it will decrease yet, but it looks like it will last.
View detail
Thin and easy to use.
I used to use Home center, but this KTC is thin and easy to use. View detail
Fits: HONDA MONKEY, HONDA Z50R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA Z50R, HONDA MONKEY
Transferred from TT100
I replaced the front and rear tires on my MONKEY and installed KITACO Casting wheel. this is the third time to replace the tires. the first time I used TT100 W/T without tube and it ran without any air leakage. (Not recommended) The second one was also TT100, but this time I installed the Tubeless, and the third one was DURO's Tubeless recommended by KITACO.
It feels a little heavier than the TubelessTT100 and more race ish than the Pattern of the TT100, but since I have only just installed it, I am not sure about the driving pattern yet.
Tire shipping and tire inventory storage was so neatly packaged that I wish other tire makers would learn from it.
View detail
Repeat
Previously purchased items transplanted to CBR
I installed this one on a 92 Grom.
SealRubber is available for peace of mind.
I tried to make it a casual Accent.
It is also a good size for the cap of a light car.
I may also Repeat for Vehicle.
I thought it would be nice to be able to rotate it between Groms, CBRs, and light cars in different colors. It would be possible to use them in different colors.
Maybe it can be used in a standard car according to JIS standards, but I haven't tried it yet.
If it had been a little less expensive, it would have received a perfect score.
View detail
Easy to use and safe
I have used various Tire Lever and the handle and tip spatula are just right in bend and thickness.
Surprisingly, some large handles can cause palm pain, but this is a safe and easy-to-use product.
View detail
Easy to use
[How is it used?
I bought this because I use it on MotorcycleMain. The angle is easy to use.I use it on Motorcycle, car and bicycle.Mothers' bicycle is no good.
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use.
[Points to note]
FLOVAL PROStyleTool Quick coupling One-touch type O-Screw Plug 20PMA Applicable O-Screw (R) 1/4
You have to buy these things separately to use them.
How did it compare to other products?
Memory is easy to read
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
20PMA Applicable O-Screw (R) 1/Quantity:4 Why don't you put it on and sell it as a Set?
View detail
I like the casual PistonDesign!
[How is it used?
NORMAL's Material:I bought it for dress-up purposes because PlasticCap looks cheap.
Was the one you received as per Image?
It was as per Image, but the weight is light, solid and durable.
Was the installation difficult?
It is easy because it is a Bolt On mounted photo.
How was your experience with it?
There have been no air leaks or other problems to date.
The design is Level, which you don't notice unless you look closely, but unlike the Mischief design, it blends in.
[Included Parts:were they on?
There is no other.
[Was there anything that disappointed you?
I was worried about the color, Plating, but the paint seemed to peel off easily, so I am glad I went with Silver.
I am glad we chose POSH because there are other products with a similar design, but the accuracy does not seem to be very good, for example, there is a difference between the image and the actual product.
View detail
Keep one for now.
Easy to use, Basic and one of a kind Items to have.
It is as easy to use as DRC's heavy Tire Lever, KITACO's regular Tire Lever, and a domestic Tire Lever with a smooth tip whose name I forget.
View detail
Ease of use is good
Because I got Air compressor, first of all, I bought this product which can do Check and Inflator of air pressure together with Air gun of standard. When I start to be particular, there is a thing of about 20,000 yen only in the air gauge, but because it is no use to arrange everything with such a first-class product suddenly.
The long neck and easy to read air gauge are great for motorcycle use. The long neck construction is convenient for motorcycle use and the easy to read air gauge is a plus.
To the Impreza. "The Hose was bent at an impossible angle. I was curious about this, but I have the impression that it won't happen unless you're very unlucky. I didn't have any problems with it.
What I was more interested in was the Included Parts:. It's been mentioned in other people's impressions. "Quarter to 20 PM." The TAB coupler is not included. If you think about the popular compressor, you can just put this size coupler from the beginning, but why they sell it separately is a mystery. It costs about 250 yen per one, but I hope the manufacturer will install this size coupler from the beginning, because basically all aerodynamic tools for motorcycle maintenance use this size coupler.
View detail
Is it better than the MONKEY OEM?
When I changed the wheel of MONKEY, I also changed the tire to this one.
It grips better than the OEM and is fine for city driving.
I think it wears off a little fast, but the price is cheap, so I'll take it.
View detail
The best Tire Lever I've ever had!
First of all, the ease of use is the best compared to the Tire Lever I've had
It was easy to get into the gap between the rims, and when I put the Tire in after it was replaced, it went in without difficulty
I only bought 1 pc as a trial, so next time I order, I'll be able to get more Quantity:I would like to have about 2pc
The one drawback is the high price I don't know if it's cheaper in terms of TotalCost without just canning the tube and making it puncture Okay?
View detail
One of the easiest levers to use
At first we used a cheap Tire Lever from Straight and Daytona etc I was there, but Race's seniors and friends at the supply store
I bought TSK and this KTC Lever after hearing about it from
It is true that the tip is thinner than that of the less expensive competitors, but the strength is also ensured, and this thinness, shape and Grip's Thanks to this, it became easy to work on the Large change
View detail
Fits: HONDA MONKEY, HONDA Z50R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA Z50R, HONDA MONKEY
Battle at price
The Tubeless tire to be put into KITACO's Aluminum8Inch wheel I was looking for DURE and TT100, and I'm using Dunlop now This time I tried to make it DURE
The installation was done by myself with Tire Lever I think it's heavy, because Grip is not a circuit run, but a normal road, so it's asphalt The gravel road and gravel road are good, and the TT100 has a slightly better grip of Corner in the mountain passes I did
I also replaced the L-shaped Valve while I was at it
View detail
It is easy to use
I bought this forged Tire Lever because the tip of the Chinese Tire Lever purchased in the jungle broke The thickness and shape of the tip are exquisite and the feeling of use is also good View detail
Easy to use as it is for Motorcycle
Although other people are also written, it should be attached to the connection to Coupler
The trouble of going over to the home center is to make the convenience which can be ordered with Net unnecessary
View detail