Reviews
Fits: HONDA SUPER CUBC125, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB, HONDA HRC Grom
Needed?
I replaced the Driven Sprocket on my Grom JC92 just in case I need to add one more. It was easy to do, but once I removed the original one, I found that the mounting bracket was too small, so it did not come off, but there was some rattling. If you want to increase the number of pins to a large size, it may be necessary, but if you want to increase the number of pins by one, I don't think it's necessary. View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
Purchase with KITACO Driven Sprocket
Purchased to change from standard Driven Sprocket 14T to 15T.
By attaching this, they can support up to Large16T.
It is not designed to prevent interference between the Chain and Crankcaseetc., so the Chain must be adjusted periodically.
For example, adjust at the same time when changing oil, etc.
So far, no abnormal noises have been heard from the Cover, so it is fulfilling its role as a product.
The product is warranted for 6 months, but only in case of quality defects due to manufacturing reasons, so we asked PRO Shop to install the product.
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
Protection.
[How is it used?
Drive Sprocket (Front) (https://www.webike.net/sd/370566/), as it seems to be mandatory to purchase them at the same time in order to install 16 of them.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Simply remove the original attached OEM and replace it.
How was your experience with it?
There is a sense that Crankcase is protected. I don't feel it particularly.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail
Fits: HONDA SUPER CUBC125, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB, HONDA HRC Grom
Necessities
[How is it used?
I bought it because I replaced it with a 16T.
Was the one you received as per Image?
Street Image
Was the installation difficult?
it's simple
How was your experience with it?
It can be used normally
[Included Parts:were they on?
Instruction Manual was available
[Was there anything that disappointed you?
None
Other items that would be helpful
With installation points and hang instruction manual
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
good
When Sprocket is set to Large, this must be attached. View detail
Fits: HONDA MONKEY125, HONDA SUPER CUBC125, HONDA glom, HONDA glom, HONDA CT125CT110 HUNTER CUB
no problem
I replaced the Sprocket Cover with this product because it looks like a gold chain slider and I wanted to expand the range to adjust the GEAR ratio in the future.
As for installation, it is almost the same as NORMAL, so if you use Normal cover, it might be tricky.
The texture is trustworthy KITACO, no problem at all.
In addition, this is because the speedometer goes wrong when the GEAR ratio changes and the speedometer sensor made by the same KITACO becomes detection by the front wheel, and this cannot be installed when this is ABS.
Therefore, if you want to change the GEAR ratio, you will need a separate sensor that can be installed on ABS such as Takekawa.
If you don't want to change the GEAR ratio, you can use ABS without any problem, so it's worth considering if you are using a Sprocket Cover that you can see inside.
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
A must have for FrSprocketUP!
When I FrSprocketUP, it seems to hit in NORMAL.
Because it was cheaper than other companies.
View detail
Fits: HONDA MONKEY125, HONDA SUPER CUBC125, HONDA glom, HONDA glom, HONDA CT125CT110 HUNTER CUB
not installed yet
While changing the gear ratio of the small gear to the large gear, the small gear got bigger and interfered with the chain, so I bought it. Delivery was not slow and fast, but I haven't installed it yet. I bought the large gear because the small gear became larger and interfered with the chain while changing the gear ratio of the small gear. Delivery was not slow but fast, but we haven't installed it yet. I tried to install it myself, but the weather is cold so I can't install When the weather gets a little warmer, I need to install it. translated by Google Translator View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
Either way, with or without...
When I upgraded the JA07 FrontGEAR from the OEM 14T to 16T, I was told that I needed to do so. I bought it.
The original OEM chain slider is removed and replaced at the time of installation. It is used in the form of a car, which is completely unaffected by the presence or absence of this component itself.
As a result, the GEAR ratio was too low for the Normal engine at 16T, so it was not useful, and the 15T was not suitable for use. I changed to the T and became the fee ring of choice, but the removed OEM Chain Slider can't be put back (because it is fixed by welding on the cover side), so it is left as it is. I am.
View detail