Reviews
Nipple is missing.
Not enough Nipple. (I was in a hurry.) We reused some of the old Nipple we had removed and assembled it.
It is very disappointing because the quality is perfect.
View detail
Not worth talking about. It's too thin.
For OEMShaft O.D. 11.93~.
Kochira is 11.85mm to 11.87mm in diameter.
It rattles. Somehow, it has turned into a TaperShaft!
Left11.85 Middle11.87Right11.90mm What is this?
Also, Mt. Screw's effective length is too long.
Some Swing Arm you are using has a thin shaft.
It goes wild and leaves a Screw Mountain scar.
Why did I buy this one, lol?
View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY125, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA glom, HONDA DAX125
not conforming
I searched only for JA-10 and bought it thinking it would fit, but it did not.
The reason.
I had to search for SUPER CUB110PRO.
I wanted to make a note since it is the same JA-10 model.
View detail
Two short.
I didn't know I was missing two bottles, and I thought the work would be done when it was warmer, so 30 days passed before I could return it.
There is no way to contact webike as there is no information on how to contact them, and there is no way to get in touch with them.
Motorcycle without front tire is waiting in the yard.
View detail
Large Is it strong?
We manufacture and sell Front, Rear and hollow, lightweight shafts, but when we asked about the Torque for installation, we did not receive a reply.
This shaft is also important for riding a motorcycle. (directly related to human life) Since this is a very important component, I wonder if the inspection, testing, etc. is not done at the production stage.
I like BORE ACE products a lot, and I would like to install various things in the future.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I feel so much better.
I don't know if my Motorcycle is in bad shape or what.
I could not perceive any change at all.
I'm going to assume it's better because it cost 40,000.
This is recommended for those who have made too many modifications and don't know where to hang the Gold.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA XSR900
TYPE-SB1 Rear Aluminum forged Wheel
Ordered 3 months ago and was cancelled by itself due to lack of stock 3 months ago View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Lowest quality
(Note:WeBig has been good to us. It's about the item itself.
Distance Collar is lowered by its own weight and Axle does not enter from the side.
Through Mr. WeBig. Funny, isn't it?" I said.
"It's the part that keeps Bearing from getting inside, so it's not a
It is slightly movable before installation 。 "
He was kind enough to tell us about the body structure.
(The OEM has a flange that is press-fitted into the pipe so that it fits almost in the center while still wiggling around. However, this one does not have a flange and is just a Pipe. Of course, there are some models that have only a pipe, but in those cases, the inner diameter of the hub is narrower so that there is not much gap from the center even though it is a pipe shape.
When you install it on the car body, of course it is in this direction (the bottom side of the image is the ground), so I guess it means that you should insert it after putting out the Center by inserting a Driver from the opposite side….
The most surprising thing is this. It's Spec. This is Tanaka Shokai, which says
You have to do a lot of them to know if it's too Gap (too Large). (I'm sure you can't tell that this is too Gap (too Large to play with) unless you play with a few units.
I wonder if they would be able to push through with that (Spec. ), I guess I'll be able to push through with that (Spec.
View detail
Fits: KAWASAKI Z1(900Super4), KAWASAKI Z1000MKII, KAWASAKI Z1R-II, KAWASAKI Z1R, KAWASAKI KZ1000, KAWASAKI KZ900
Cancellation
I just don't know when.
Cancellation.
View detail
In Cancellation
It is for not knowing when it will be, so I will Cancel. View detail
It's badly distorted.
There was some distortion, but the paint was not great. View detail
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
It didn't come with the CUB110 JA07.
It is not attached to CUB110 JA07. View detail
Fits: HONDA CBR250R (MC41), HONDA CBR250R (MC41)
It's completely useless.
I gave it to the Motorcycle shop to have it replaced along with the Tire replacement. It's longer than the OEM Bolt and sticks out a little too far for me to install. I was told
Applicable car models are "CBR250R And what was that?
If this is the case, we should have started with βMaterial:I regret that I should have bought the Titaniumium.
View detail
Rough processing
The bolt tip is poorly processed. The last time I bought a 235mm bolt it had the normal shape, but this time the 220mm bolt has a beveled surface with no finishing work done, so I'm a little worried that it might get caught in the Lock nut. 。 It was an out-of-stock item, but I'm sorry that I didn't rush the delivery date. (It was delivered much sooner than expected, but I hope the product will be reliable even if it takes longer) View detail
Fits: HARLEY-DAVIDSON
It's not accurate.
I tried to replace the Iron Spoke because it was rusty, but the angle of the Spoke was slightly different and the umbrella part was not enough meat.
So I installed the original one to remove the rust and used it as a replacement for the broken Spoke, but it still needs to be modified.
View detail
Fits: KAWASAKI Z1, KAWASAKI 750 SS, KAWASAKI 750 RS
I wonder.
I built it with the Takasago HRim, but as a result, after two rides, all of the outer side of the rear was broken, leaving only two legs. It seems that the neck of Spoke is too long to fit into the hole of the hub Exactly. It is hard to say because it is a combination with the external Rim. It is a pity because the texture is good.
Just an FYI for prospective buyers.
View detail
Dimensions?
I received my order they do NOT fit my RS125 Honda Wheel. They are 1.3 mm too big ? What can be done to correct this situation. Can you tell me the correct dimension. I am sure this a genuine error View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, HONDA NSR50, YAMAHA SMAX, YAMAHA Majesty S, HONDA NSR50, YAMAHA SMAX, YAMAHA Majesty S
axle nut for smax not fit in nmax
it's very unfortunate that this good looking axle nut designed for yamaha smax and majesty does not fit it yamaha nmax 155. it's a M12 x 1.25 nut and it is too big, i also tried M10 nut but also did not fit in... i guessed it has to be a special nut, maybe a M10 x 1.5 nut...so unlucky for me this time...just wondered why they don't make a common one for these small cc scooters. View detail
Fits: HONDA GYRO [Gyro] UP, HONDA GYRO [Gyro] X, HONDA GYRO [Gyro] UP, HONDA GYRO [Gyro] X
Please attach Bolt that matches Spacer width!
Bolt fixing the hub and Spacer has a long dimension
Bolt interfere with the hub
Can not be installed securely.
Even though I painted the hub cleanly and beautifully
The paint got scratched and it got dented.
Even at other sites,
I bought this Seller's Size Spacer,
Although there is no interference, it was still too long Bolt.
Bolt comes out from the hub and it is very ugly..
We ordered Bolt separately with monotalaw, including this one.
It is probably a thing that does not do inspection etc..
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
That's it!
Although making can not be helped by price, there is about twice the folding of Center compared with OEM Product There is a possibility of hitting Seal part of Meter gear! View detail