Reviews
Lowdown
After much deliberation, I decided to go with EFFEX and it was the right choice.
Thanks to the fact that it is a little more than two centimeters lower, it will stick with sticky feet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
I can work on it myself, but it's more difficult.
Link Plate was replaced while supporting the car body with Panda Jack using only Side Stand.
Both foot tongs are now attached up to the ball of the big toe and feel more secure.
Since the rear was lowered, the front fork also protruded 1.4 cm.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
EFFEX Lowdown Kit
Even 2cmDown makes quite a difference in the sense of security.
Quantity:I think Set's STAND is also sturdier and better made than OEM.
View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy
How was your experience with it?
Very good
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Formative Lantern CUB
The work is difficult! Special tools are required. If you don't have it, you can't do it! First, you need to remove the front wheel, then the front cushion, and then use a special tool called a spring compressor. I recommend the Straight Coil Spring Compressor for Motorcycle, which can be used on an AXIS light truck and an NVAN. I received this compressor as a prize from a magazine. I have been using it for more than 10 years. I have been using the NTB product Moldy gave me for 1000 yen before, but this time I had a chance to use this product. View detail
MaBirds SpringKit
The Integra front shock was replaced because it was soft and the reduction force was not very effective, causing the Under Cowl to rub all over the place.
It is much better.
View detail
Obviously way better then the original units with there
About quality and texture - The rear shock absorber from Ohlins is made from machined billet aluminium featuring gold and silver anodized surface finishes with yellow painted springs, the quality from the overall fit and finish is perfect. About the feeling of use - Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound and compression adjusters. This rear shock absorber offers multiple spring options so everyone is covered for your weight and riding style. Products to buy together - After purchasing this rear shock absorber the next flaw in the rear suspension system is the swing arm pivot bushes that restrict movement. The purchasing of a swing arm with bearings at the pivot points will complete the upgrade. Difficulty of installation - The installation of the rear shock absorber is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear shock absorber between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear shock absorber is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no option for sea freight or EMS for the rear shock absorber, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Good work.
After all, OHLINS goes well with this.
The cut-outs have a great impact on the appearance at this price.
KA739 Strong gold on Z900RS SEOEM
Impact looks awesome!
View detail
![Twin Shock [Z Series] Z362](https://img.webike-cdn.net/catalogue/images/116206/z_img_TS.jpg)
Installation on ESTRELLA
I replaced the NORMAL with ESTRELLA. It has just been installed and is still under adjustment, but the stability at the Corner is clearly different and I can feel the stickiness.
Installation and adjustment were both easy and added another dimension of enjoyment.
View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy with special tools
How was your experience with it?
Large strange
[Included Parts:were they on?
RClip
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Footwear up
I was originally going to buy the LINK lot, but decided to buy this one for the cosmetics.
Spring compressor is required, but installation was easy. (Spring compressor is an Astro purchase)
View detail
This rear suspension offers multiple spring options so everyone is covered
About quality and texture - The rear suspension from Ohlins is made from micined billet aluminium featuring a silver anodized surface finishe, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension offers multiple spring options so everyone is covered for your weight and riding style. Obviously way better then the original units with there heavier rated springs and preload adjusting collars and the looks when fitted to the yellow Monkey 125 with it's matching gold front forks is the best. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this high quality rear suspension the essential product to purchase to complete your suspension upgrade would be the Ohlins front fork insert kit but sadly Webike Japan do not have this product available but you can purchase it from Webike Thailand. Difficulty of installation - The installation of the rear suspension is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear suspension is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no option for sea freight or EMS for the rear suspension, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
More than I expected
I think the OEM is not as good as the Large, but the ride quality has changed impressively. The cornering on mountain roads is so much smoother than the OEM. I feel like I'm getting really good at it.
Although upon closer inspection, the construction may be crude in some areas, the performance exceeds expectations.
I personally found the DeFault setting to be too stiff, so I pulled out a little Pre-road. Damping force was left as is. I will adjust it as I see how it goes.
View detail
Front and Quantity:Set
[How is it used?
GSX-S 125 2023 (DL32D), Rear is also converted to YSS at the same time.
The use of the vehicle is Light, including commuting, city driving, and day-touring.
Was the one you received as per Image?
YSSQuality as usual. No problems.
Was the installation difficult?
I asked the Shop to do this for me. The FFork oil that came with the kit seemed to have a very hard number in it. （The FFork oil included in the package seemed to be a very hard number, but it was less than one bottle, so it was supposed to be mixed with others.)
How was your experience with it?
The viscosity of the supplied FFork oil seems to be very hard. I was wondering what to do after reading other reviews, but I decided to give it a try and used a mixture of the supplied oil and OEM FFork oil.
As a result, I could feel that the system was working properly after the conversion, although I could not feel it working well in NORMAL mode for my above application.
However, the oil is definitely hard, and it does not seem to be soft or move well. On public roads, there may not be a situation in which the oil is at the full bottom.
[Included Parts:were they on?
Instruction manual, FFork oil (I forgot the volume, but not the full amount)
[Was there anything that disappointed you?
Nothing in particular. It has an adjustment mechanism, which I would like to try out in the future.
I have changed to YSS both front and rear and now have a normal suspension, which I think is safer, more comfortable and more pleasant to drive than NORMAL, including the behavior when stepping on the Gap and the overall ride quality.
View detail
Interferes with HondaOEM Front carrier.
As the title says, it interferes with the OEM Carrier, so I bought a new KITACO Carrier. However, KITACO's Carrier is different from KITACO's Carrier in Quantity:Pair (for Left and Right) Since it was necessary to tighten the bolt one by one, and since it interfered with the bracket, the bracket was shaved with a grinder, and instead of using the collars supplied with the product, the fixed part of the KITACO Carrier was used as a collar to forcibly install it. View detail
Famous Manufacturer
for Race used for Machine.
Since it is diverted to another car model, modification is required.
If well assembled, there is no need to say anything about performance.
View detail
SEROWRear Suspension
The Rear Suspension with nearly 90,000 km is to be replaced.
The replacement was made several years ago.
The basic setting is Normal base and the recommended setting is almost like NORMAL. I also set the Front setting to "Quantity" to match this Rear setting.:Set
My impression after a quick ride was that I was back to my NORMAL new car. However, after riding the car for a long distance and in various conditions, I noticed that it moved very well. However, after riding it over a long distance and in various conditions, I noticed that it moves very well. I feel safe on rough and wet road surfaces. I have been driving on the Asphalt most of the time recently, but even when I drive aggressively, I feel very secure. Gap in the bank is also a problem, but it is quickly resolved and I am able to drive through. I think it is a very good product.
View detail
Fits: HONDA CB250R, HONDA CB300R
feel well
I had a chance to remove the air cleaner box, so I decided to add a rear shock.
I think I waited about 4 months for the shock itself after I ordered it.
The ride is just like Nitron itself!
However, in the case of CB, it is not possible to adjust the pre-load if it is installed.
The more expensive ones might be able to, but I can't afford them.
I rode with the default settings, but even so, it was full of the feeling that the shocks had been changed.
A little softer would be better for my taste.
Well, I'm looking forward to adjusting it after removing the air cleaner box.
View detail
Best shocks
I recommend it because it has much better ballast than the stock rear shock and looks even cooler.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
KITACO Shock Absorber
About quality and texture - As always Kitaco products are very well made with great craftsmanship. About the feeling of use - Rides so much better from stock. My old shock were too soft and the kitaco shock is much stiffer and adjustable. Difficulty of installation - Installation is easy for me as i have the proper tools and equipment. Cost performance and comparison with other products - very affordable About shipping and packaging - shipping option was only fedex but i will not complain, as i had other ordered items that came along with it. I received my products in just a few days. View detail