Reviews
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
Good position and fit
This product is excellent condition. I Use it because of the position of my leg is not comfortable with the original one. So I install it and the position is well now. The shipping is excellent also, fast to receive so I can install it immediately View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
Very good looking.
There was a time when I used a product made by another company a long time ago.
Since then, I have been riding with Normal position, but since I have switched to the method of raising Seat height etc., I felt the need to buy this product.
Most of the products at that time were anodized and came in Blue or Red, but they looked like they were simply cut out of a flat plate and did not have a very high quality feel.
The shape of this product has been designed to look very parenthesis.
I have not had any falls since I started using it, so I do not know how strong it is.
However, as long as you step on it, it seems to be sufficient and you don't feel any bruising.
Also, there was no problem with the accuracy of the screw holes, etc.
It seems that there are several types of LineUp with different Position dimensions that can be changed.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
The rigidity is different.
Until then, I was just using the Footpeg Up Plate for the Rear Sets, but since it was simply attached to the footpeg mounting position, the rigidity was not very good. This product has increased the rigidity of the footpeg, so that the power does not escape when you step on the footpeg, and the load can be applied firmly, so it is easier to run. View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA NSF100, HONDA NSR Mini
A must-have for CBR1000RRRacing Rearsets
CBR1000RR (SC59) with 201600-SP (Return spring) Used
I think the Honda NisshinRear master will fit most of them
Most External Racing Rearsets are Return of Brake pedal The spring was not installed and it was uncomfortable to step on
I was looking to see if I could somehow install a return spring on a MOTOGP vehicle I saw the Spring on the MASTER part and searched for it
It's pretty much the same as "Reasonable" because it can function and look good It is
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape 100 Type D
no problem!
We purchased this because we installed Rear Sets on APE 100typeD. I think that angle is exactly good and that you can also use Side stands switch.
In addition to Side Stand and Side stands switch and Spring I think Screw and Nut are also necessary.
View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
Pretty Race ish Position!
100mmUP / 150 mm BACK changes to Position which is pretty Race ish.
Height tall people may be a little tender? (Lol)
In the built-in part, accuracy is good and there is no dissatisfaction!
There was no bending in a light fall.
I think that it is firm regarding rigidity as well!
Maybe MinusPoint is a bit of a thing that looks awesome ... (Lol)
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA NSF100, HONDA NSR Mini
Purchase to make NSF Positive Change
Looking after installation is good Large change.
However, footpeg broke in SlipDown and flew away, Plate was also distorted, rebounded to ROD and could not start again.
It is weak in terms of strength.
I will exchange it for another footpeg.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
The targeted Footpeg Position came out.
Mounting on NSF 100.
We, 178 cm tall and long arms and legs system is very cramped at hanging Position, Boots' Size is also Large Because OEM's footpeg position shifted his feet and collapsed, the toe was scraped, "Somehow ..." I thought that I was saved by this product.
In addition to this product I additionally put the tip of OEM footpeg 1 / I have about 3 Cut. Thanks to this I can not rub footpeg even at the bank angle which makes elbows.
Currently we are considering introducing the Seat CowlBack plate to further stabilize posture in the bank.
The bad point is that the enclosed Bolt's quality is not very good. There was an uneasy response from the time of installation, the proper tool - In spite of being tightened with the proper Torque, Bolt has a tool trace attached.
It is a place where a load is applied when falling down, so it is a machine with a lot of vibration, so there will be anxiety there.
If you are going to desorb again and again, you may need to take a look at Bolt's exchange.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA NSF100, HONDA NSR Mini
Though it was simple structure, it was a Back step with a Design and good texture.the Touch of Pedals was also good and it rubbed it to user-friendliness -- it is absent.Since it is a hollow Step, it may conflict with a Regulation depending on a Race.
Though it was simple structure, it was a Back step with a Design and good texture.the Touch of Pedals was also good and it rubbed it to user-friendliness -- it is absent.Since it is a hollow Step, it may conflict with a Regulation depending on a Race.
I think that it excels in the Cost performance also in that it shows.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA NSF100, HONDA NSR Mini
It purchases as replacement parts. Although time was taken by acquisition, it is a kind limitation that installment acquisition can be carried out [ which it is called only left-hand side ]. Acquisition is after [ from an order ] half a year at having n
It purchases as replacement parts. Although time was taken by acquisition, it is a kind limitation that installment acquisition can be carried out [ which it is called only left-hand side ]. Acquisition is after [ from an order ] half a year at having no Manufacturer stock. It is gratitude at the corresponding Webike Staff. View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA NSF100, HONDA NSR Mini
[a Webike Monitor] -- NSR -- it is purchase to business custom-made [ 50 ]. Since the result was known with other products, it is as expected. It was an in general satisfactory product.
[a Webike Monitor] --
NSR -- it is purchase to business custom-made [ 50 ].
Since the result was known with other products, it is as expected.
It was an in general satisfactory product.
View detail
Straddle does not hear a pure step but it slides on it moreover. It was at the worst. When purchasing instantly, the feeling became good very much. Since it does not slide and slightly short one tends to carry out step work, it is Good!!!
Straddle does not hear a pure step but it slides on it moreover.
It was at the worst.
When purchasing instantly, the feeling became good very much.
Since it does not slide and slightly short one tends to carry out step work, it is Good!!!
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
Although it wavered with the usual step up plate, the goods here were chosen by appearance. Structure is beautiful and has also satisfied accuracy very much. However, the frame hardness up in explanation is referred to as not having carried out, o
Although it wavered with the usual step up plate, the goods here were chosen by appearance.
Structure is beautiful and has also satisfied accuracy very much.
However, the frame hardness up in explanation is referred to as not having carried out, or is not felt.
It seems to be strong to the sag of the step attaching part at the time of a fall, or breakage.
In addition, in the fault of a step up plate, if it attaches, a step will spread outside.
View detail