- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Foot Controls
- Setback Plate
- Very good looking.... (SHIFT UP: Step-Up Plate)
【SHIFT UP】Step-Up Plate Review
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
Very good looking.
There was a time when I used a product made by another company a long time ago.
Since then, I have been riding with Normal position, but since I have switched to the method of raising Seat height etc., I felt the need to buy this product.
Most of the products at that time were anodized and came in Blue or Red, but they looked like they were simply cut out of a flat plate and did not have a very high quality feel.
The shape of this product has been designed to look very parenthesis.
I have not had any falls since I started using it, so I do not know how strong it is.
However, as long as you step on it, it seems to be sufficient and you don't feel any bruising.
Also, there was no problem with the accuracy of the screw holes, etc.
It seems that there are several types of LineUp with different Position dimensions that can be changed.
หน้าตาดีมาก.
มีอยู่ครั้งหนึ่งที่ฉันใช้ผลิตภัณฑ์ของบริษัทอื่นเมื่อนานมาแล้ว
ตั้งแต่นั้นมา ผมก็ขี่แบบ Normal มา แต่เนื่องจากผมเปลี่ยนวิธีการเพิ่มความสูงเบาะ ฯลฯ ผมจึงรู้สึกว่าจำเป็นต้องซื้อผลิตภัณฑ์นี้
ผลิตภัณฑ์ส่วนใหญ่ในขณะนั้นได้รับการชุบอโนไดซ์และมาในสีน้ำเงินหรือสีแดง แต่ดูเหมือนว่าพวกเขาจะถูกตัดออกจากจานเรียบและไม่มีความรู้สึกคุณภาพสูงมากนัก
รูปร่างของผลิตภัณฑ์นี้ได้รับการออกแบบมาให้ดูเหมือนวงเล็บมาก
ฉันไม่เคยมีน้ำตกเลยตั้งแต่เริ่มใช้ดังนั้นฉันจึงไม่รู้ว่ามันแรงแค่ไหน
อย่างไรก็ตาม ตราบใดที่คุณเหยียบมัน ดูเหมือนว่าจะเพียงพอและคุณจะไม่รู้สึกช้ำใดๆ
นอกจากนี้ยังไม่มีปัญหากับความแม่นยำของรูสกรู ฯลฯ
ดูเหมือนว่า LineUp มีหลายประเภทซึ่งมีขนาดตำแหน่งต่างกันซึ่งสามารถเปลี่ยนแปลงได้
Responses
Other reviews
The targeted Footpeg Position came out.
Mounting on NSF 100.
We, 178 cm tall and long arms and legs system is very cramped at hanging Position, Boots' Size is also Large Because OEM's footpeg position shifted his feet and collapsed, the toe was scraped, "Somehow ..." I thought that I was saved by this product.
In addition to this product I additionally put the tip of OEM footpeg 1 / I have about 3 Cut. Thanks to this I can not rub footpeg even at the bank angle which makes elbows.
Currently we are considering introducing the Seat CowlBack plate to further stabilize posture in the bank.
The bad point is that the enclosed Bolt's quality is not very good. There was an uneasy response from the time of installation, the proper tool - In spite of being tightened with the proper Torque, Bolt has a tool trace attached.
It is a place where a load is applied when falling down, so it is a machine with a lot of vibration, so there will be anxiety there.
If you are going to desorb again and again, you may need to take a look at Bolt's exchange.
View detail