Reviews
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR)
Replace rusted Bolt and Cap Nut
The mounting bolt and cap nut of the rear suspension have rusted and were replaced to refresh them.
The replacement was done at the same time as the AxelShaft, so it is incidental.
It doesn't look much different at a glance, but I feel better when it is clean.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Z1R
The Chain Adjuster on my Z1R was dirty and I was concerned about it, so I replaced it at the same time as the Axle Shaft. I am not sure how well it works, but I am Large satisfied with my car which is getting cleaner and cleaner. View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
Z1R
We replaced it with an external MagTanWheel at the same time. It may not look the same at a glance, but I think my car is happy when the details are cleaned up. View detail
Ideal for geronimo footpeg
Used to convert KawasakiZ1 footpeg to Rear Sets.
When we shorted the OEMShift pedal and Brake pedal, the so-called Geronimo footpeg was installed with the footpeg turned inside out.
It is unfortunate that the footpeg shape is chunkier than the OEM footpeg.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR)
OEMFootpeg Rubber due to discontinuation
Used on KawasakiZ1.
We replaced the OEM footpeg with a footpeg when we converted the OEM footpeg to a reverse-engineered footpeg, commonly known as a Geronimo footpeg.
When using a footpeg, attach the rubber to the vehicle after the footpeg is attached to the vehicle body so that the direction of the footpeg is not gapped.
Also, be sure to use adhesive when attaching to Footpeg.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
z1 Hub damper
The z1 Rear hub had rattled and was replaced with this product.
There were no problems with installation, etc., and the rattles are gone without a hitch.
View detail
Great swingarm
Previous owner put a wider aluminum rim and a 140 tire that came within a mm of the inside of the stock swingarm. Not only did this swingarm give me the extra clearance I needed, the extra bracing and beefier construction really improved the handling. View detail
Fits: HONDA CB400 Fore (air-cooled), HONDA CB400 Fore (air-cooled)
For Overhaul
[How is it used?
Purchased Front fork for CB400F for overhaul.
Was the one you received as per Image?
I didn't expect it to come with Fork oil as well, but it is as per Image.
Was the installation difficult?
If you have a workshop, it is a good idea to have it done in a store.
How was your experience with it?
After the replacement, I feel that the ride is more comfortable.
[Included Parts:were they on?
Fork oil。
[Was there anything that disappointed you?
Nothing in particular. I am satisfied with the price.
View detail
Fits: KAWASAKI Z800, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI 750SS Mach IV (H2)
It can be used without problems
There is no snagging, etc., and it works normally.
I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and does not get stuck, but what do you think?
At any rate, it's a normal good one with no Trouble!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS, KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS
be extremely thorough, focusing on even the finest of details
It is sometimes necessary to convert an old car to a front double.
In our case, we put it on MACH.
It is nice to have these parts available without having to make them at One-off!
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
You can taste the effects, but …
You can taste the effect, but be careful because Tandem is deprecated!
I feel like I can tandem it, since it doesn't seem to lack strength from what I can see, but…
It would be nice to be able to taste the Lay-down effect without welding!
View detail
After all, Bearing is LLUType.
I think it is just as described in the product description. I bought this Bearing because I don't expect it to be durable. 1 unit is Quantity:I love that it's a Set! View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
compared with other companies
I thought that all Reproducts were made in the same factory, but now I realize that this is not the case. View detail
Fits: Others For KYB36Z, その他 For KYB36Z, その他 For KYB36Z
Webike's response to returns and exchanges is still the worst.
I contacted them with photos and explanations as per Webike's return/exchange procedure, but they have yet to reply to any of my emails. But I still haven't received a single reply. I contacted PartsManufacturer directly because Webike is not reliable, and they sent me a replacement part free of charge the next day. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Reflector has been removed.
The Reflector was removed while driving.
Why don't you buy it if you are interested in OEM look?
I switched to ITRON.
View detail
For homemade Chain slider.
The processing was easy and the Material feel was good. I'm not sure why it's a trapezoidal shape, but if it's supposed to be processed, it should be a regular rectangle…If there was a cheaper one without Rivet, it would be great. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
OEM Parts Discontinued
I bought this product because OEM Parts was discontinued.
This is a small part, but without it, you cannot fix the Light Bracket.
I am grateful that Ripro has released these Parts.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I am satisfied
This is my car that I have been driving since 35 years ago, but at the beginning, I have continued to drive it thinking that it would be like this due to the mechanism of Suspension at that time. On the way, I repeated disassembling and washing many times, and I hoped that the thrust would be relieved even a little.
Because there was resistance in the movement of Inner Tube and Outer when disassembling it, and movement was bad, Inner Tube was also Ripro, but I exchanged it for a new one.
But it still didn't satisfy me, and when I gave up.
I saw the product in question, and when I look at the spec. in detail, SlideMETAL is equipped to Inner and Outer?
Order right away?
I could see the difference as soon as I put it on the car and tried to bottom it out.
It's a whole different animal when you actually drive it?
The SlideMETAL absorbs the bumps very smoothly.
Of course it's not as good as the latest motorcycle suspensions, but if a 45 year old suspension can work this well, I'm very happy.
I'm looking forward to it now because it seems to solve the Stress at Touring.
This is the end of a 35-year problem.
View detail
Motorcycle shop recommendations.
I bought this because I remembered that when I changed the Bearing of Steering from Open Type to this kind of Bearing at Motorcycle shop, they recommended me to change the Bearing of undercarriage from Open Type to this kind of Bearing.
good point
There is no damage to Bearing by gravel like Open Type.
The movement of the Wheel naturally becomes smooth, too.
Maintenance is easy.
A bad point
● No, there is only Merit.
The Bearing issue is something that I wanted to see improved in the OEM Product.
It's true that when I changed the bearing and saw the old bearing, I was surprised to find gravel mixed in with it (laughs).
View detail
Processing required.
I installed it because the Chain was interfering with the Swing Arm due to the Ronsui conversion. No problem after installation, I can drive without stress! View detail