Please login to check coupons
Product Detail
Specification
■Racing type[Size]
Stabilizer (steel pipe): Φ16mm
Suspension Mount Internal Width: 25mm
Offset mount: +5mm
Tire circumference inner width: 170mm
Description
Round iron swingarm racing type with stock look and 70's racer's stabilizer for improved rigidity and stability.
By changing the structure of the swingarm, the overall stability is improved. The positional relationship of each component is the same as the Z1 stock, so the wheels and brakes can be installed by bolt-on.
●Four needle bearings are incorporated in the line-bored pivot section to ensure smooth operation.
●Grease nipples are provided on the pivots for easy maintenance.
●The surface of the chain slider is painted with baked acrylic to prevent peeling.
●Φ16mm steel tube stabilizer improves the stability of the vehicle even with the latest radial tires and frame reinforcement.
●The internal width of the suspension mount is 25mm, and by using the included offset collar, it is possible to mount the suspension mount with an offset of +5mm as well as stock width.
●The main pipe is vented using a special jig, and the inner width of the tire circumference is 170mm, allowing for installation of stock size tires as well as 160 tires.
By changing the structure of the swingarm, the overall stability is improved. The positional relationship of each component is the same as the Z1 stock, so the wheels and brakes can be installed by bolt-on.
●Four needle bearings are incorporated in the line-bored pivot section to ensure smooth operation.
●Grease nipples are provided on the pivots for easy maintenance.
●The surface of the chain slider is painted with baked acrylic to prevent peeling.
●Φ16mm steel tube stabilizer improves the stability of the vehicle even with the latest radial tires and frame reinforcement.
●The internal width of the suspension mount is 25mm, and by using the included offset collar, it is possible to mount the suspension mount with an offset of +5mm as well as stock width.
●The main pipe is vented using a special jig, and the inner width of the tire circumference is 170mm, allowing for installation of stock size tires as well as 160 tires.
Note
Caution
*The mounting bracket of the chaincase is set at the same position as the stock one, however, there is no bracket to prevent it from sticking, so it is recommended to use the plated chaincase (part number 73-265).*Stabilizer may interfere with the exhaust bracket part of the frame depending on individual differences of the vehicle.