Reviews
Hmmm...
This is a replacement from OHLINS Grip, but the Fitting is poor.
It can be installed, but it does not feel right.
Is it expensive for the accuracy?
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZRX1200 DAEG, KAWASAKI NINJA ZX-14R
The quality of the product is perfect. I appreciate that I can adjust it quickly without using any tools.
That was a good purchase
I appreciate the ability to quickly adjust without using tools.
No complaints about the texture.
View detail
Incredible quality and finish
K Factory really puts out the top shelf parts. No, they're not cheap but you really get what your paying for. The black anodized finish looks amazing. The welds and machine work are almost works of art. Shipping is suprisingly fast from Japan too. View detail
K factory Link Plate
ReliableManufacturer and looks good Parenthesis! View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250SL, KAWASAKI Z250SL
Initial Adjuster functionality is also available
I use it on my Ninja 250SL that I ride for Circuit Racing.
It is a little difficult to tighten the screws while shrinking the springs during installation.
It is not a bad product with a good texture.
View detail
Change Shaft Holder
I think it looks good.
TIGHTLY and MOCHILIOUSLY!
View detail
It can be exchanged in an instant.
I thought the OEM Blackish Grip was uncool.
I was wondering if we could exchange, from KFACTORY and Moto Corse.
I purchased KFACTORY's Grip when I learned that Grip was available.
I was worried about Moto Corse, but decided to go with this one.
I was worried because this SmallestParts cost almost 10,000 yen, but I am glad I bought it.
View detail
K-Factory billet details
This beautifully machined piece tops off the TTX Ohlins shock on my H2 very nicely . This sort of detail addition is what I look for when customizing my bikes . View detail
Maybe expensive for a Small thing. But I wanted it and I am satisfied.
It is a part that may or may not be changed, but it is a part that you can buy and use in its own way.
I'm happy with it
It would be better if it were a little cheaper. But I guess it can't be helped.
Replacement can be done in an instant with a hexagon.
View detail
as advertised
As you can see in your impressions, the M10 Bolt was too hard. It was easier to loosen the bolt by putting the bolt in the Side Stand position, which is not in the Maintenance Stand position.
The effect of the installation was not a drastic change, but the shift touch was improved. The cost of the tools was unexpectedly high, and the total cost of the parts was quite high.
View detail
If you don't want to slip anyway, this is the one.
Footpeg is quite expensive, but it is worth the high price.
Generally, footpegs have a rolling finish, called Knurl finishing, to prevent footpeg slippage, but this footpeg is entirely machined.
The Edge is not chamfered at all, so it stands gutsy at 90° and if you carelessly touch it with your hand, it might cut you.
Grip is the strongest in the world because this Edge sticks to cut the bottom of Boots.
Anyway I never slip." It is safe to say that it is made only for the purpose of
Unlike the common Footpeg for Race, the entire surface of the cylindrical shape is cut, so it can be replayed many times by rotating it when the Edge becomes round.
If played back in 1/6 rotation, it lasts 6 times longer than normal.
It does not look amazing, and it is not anodized in a flashy way, so it is a treasure for those who value looks.
A gem for people who are serious about running Circuit.
The sole of the boots is cut and shaved with such force that a pair of sneakers-type riding shoes can be ruined in a single blow.
Be sure to use it with Boots.
View detail
Effective
I was concerned about the Shift error during Downshift.
Purchased
For the price, it works.
If the part where the Shaft goes in is Bearing.
I think it is better.
Installation is in accordance with the Instruction Manual.
It is easy if you do it.
View detail
expensive
It is convenient that the ride height can be adjusted steplessly
I would recommend it if you are dissatisfied with Lowdown Link from other companies.
But the price is Neck high.
View detail
GSX1300R HAYABUSA Must-have item
I was looking for a good one, and this one caught my attention and I bought it.
I felt a strange tugging at the bearing when I inspected the product, so I applied Bell Hammer's METALGrease to the bearing to make sure it moved smoothly.
Tools should be 10mm hex and 8mm CombinationWrench with Screw lock agent
The rest of the work is done according to the manual, applying a thin coat of grease to the shaft and collar before installation, lightly cleaning the bolt and bolt hole of the side stand with air, applying locking agent to the bolt and tightening it securely.
Inspect each part before running test…!
The more pleasantly Shift is set, the more obvious the difference!
To be honest, it is a good price, but if you are a GSX1300R HAYABUSAOwner, you should buy this custom parts… Oh, it is more convenient to have a maintenance stand.
View detail
It is effective
There is an effect on the ease of entering Shift.
However, if I were to ask whether it would improve dramatically, it would be more appropriate for me to say that it would improve to the point where it would be usable.
Also, since it is used on Kawasaki vehicles, which are often difficult to shift, MotorcycleUser from other companies may wonder if this is a good idea. Motorcycle users from other companies may wonder if this is a better solution.
Installation can be done by anyone with enough skill to assemble radio controls, if they look carefully.
View detail
I omitted to attach the image.
When I submitted the Review, I omitted to attach the image.
I think it is a good product with a good finish, although it is used in places that are hard to see.
View detail
Fits: KAWASAKI ZZR1200, KAWASAKI zrx1200 -09 (kawasaki oem product no:41068-1327 with shaft), KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11
Much better than expected.
I had been interested in this product for a long time, but I had mixed feelings of hope and doubt about its effectiveness, and because it was not inexpensive, I could not take the plunge and had long been putting it off. This time, although there was no particular trigger, I decided to take the plunge and purchase it, and I compared and examined three kinds of JBPower, Radical, and KFACTORY, but I decided not to buy Radical because the One Side pops out, and to buy JBPower and KFACTORY with Axle Nut. After much hesitation between Radical and KFACTORY, I decided to buy KFACTORY's Shaft because I thought that the lower price is better because I can use OEM Nut.
If we had only replaced the shaft, we would have only had to replace the shaft as long as the front was raised. However, since there were other parts to be replaced this time, we had to remove the caliper, fender, and wheels.
After the replacement, I test drove the car for about 100 km and it exceeded my expectations. First of all, I feel that the resistance of the shaft has been reduced, and I have a different feeling of moving forward when accelerating. Also, the front of the car feels stiffer and I can feel more information about the unevenness of the road surface in my hand compared to before the replacement. When cornering, I was surprised to find that the front end of the vehicle turned sharply in the direction I had imaged when I leaned the vehicle over, and I also felt a greater sense of stability while cornering. I did not measure the weight, but when I held the OEM and this product in my hand and compared them, it is clear that the ChromolyShaft is lighter, so I think that the weight reduction under the spring and the hardness of the shaft have brought more effects than I had imagined.
The parts that can be seen from the Fork Outer are Polished, and I am in love with it. I was initially thinking that OEM Axle Nut would be fine, but I am now wondering if I should do something about the Nut as well. I am thinking about this area.
I finally purchased this product after a long hesitation, and I can say that it is one of the best products that I have ever purchased, and it makes me enjoy riding my motorcycle. I am looking forward to touring in the mountains.
This time, I replaced the Front, but I would like to replace the Rear Shaft in the near future. I am looking forward to seeing how much it will change.
View detail
Exactly
I have recently replaced my Speedometer with an external one, which is an electric one, so I purchased this color because I no longer need the Speedometer gear. I was torn between Silver and Black for the color, but I decided on Silver.
Since it is a part that goes in a place that is not easily seen, a simple tube would be fine as long as it is strong enough and the dimensions match, but I like this product because the finish is beautiful and the blue-tinged silver is very beautiful.
To install the wheel, we simply removed the front wheel, removed the receiver (the bracket that turns the meter gear), applied this collar, inserted the wheel between the front fork and the shaft, and tightened the collar through the shaft.
Naturally, the dimensions were also Exactly.
We could have left the speedometer gear in place as it is instead of a collar, but it would be extra resistance, so it is definitely better to remove it. After removing the gear, some kind of parts are needed to fill the gap. Although the price is a bit expensive, we are very grateful that these products are available.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Exactly！！
The large number of holes allows for use in combination with other Brackets.
I think it's versatile.
View detail
I feel better. It must be.
I feel a little tightly. It must be better because I don't miss a shift when I'm tired and make a rough shift change. View detail