Reviews
perfectly clear
I used it with KH's FrontDisk offset.
There was no rattling when I installed it, and the dimensions were perfect! I think this will prevent the wheel from shaking.
If I had to complain, I would say that it would be perfect if a little meat was removed. The lighter the suspension, the better.
Based on that, I think it is a highly accurate product.
View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
Saviour of out-of-print cars
I'm so impressed with SpeedShopIto's prompt, friendly and courteous service!
We hope to have the opportunity to work with you again.
View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
Saviour of out-of-print cars
Thank you, SpeedShopIto, for your quick, kind, and courteous response! View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
If you see this, please contact me ASAP!
Quantity of goods:There are parts missing from the Set!
And there's no applicable field for email correspondence either!
I've been trying to call him for over 10 minutes and he won't pick up!
There's no way to contact him!
If you see this, please contact me ASAP!
View detail
Excellent bite and universalism
Frequently Asked Items
What made you decide to buy?
I was using Rear Sets made by Babyface, but I bought them because the Knurl part of the footpeg that came with the standard footpeg was getting worn off and the bite was getting worse.
The standard fine ThornThornThorn footpegs are perfect for the initial bite, but they also wear out quickly, and the surface of the Knurl footpegs for Race bar of each company was MAJOR like this product, so if you want to change anyway, the square Knurl I was looking for a Footpeg.
When I look for it, this kind of Footpeg costs around 5,000 yen for 1 pc (One Side) alone & hellip;In such a situation, this Footpeg made by SpeedShopIto which was taught by a junior colleague, I tried it this time because it was the cheapest in the design which I was seeking!
How was your experience with it?
The first time I used it in the rain, the footpegs were able to take the load without slipping. It is a sensible part, but the Knurl of GizaGiza is good for loads that are applied from above, but when the load is applied from a diagonal direction, such as in the bank, I feel that the Boots is caught between the square and the square and Firmly bites into the back of the Boots.
So far, it's performing as expected, so if there are no problems, I'll continue to use it.
Was the installation difficult?
It has the same bolt size as the Footpeg made by Babyface, so I was able to install it as it was by replacing it.
However, the Bolt that came with it was too long and seemed to interfere with the Swing Arm, so I replaced it with a shorter Bolt.
The Babyface Footpeg comes in a color, but without this color, this Footpeg will be shorter. On the other hand, if you use the collar, the footpeg will be longer. I tried both, but I used the collar as it is because I liked the feel of the longer one with the collar dovetail.
【Please tell me the installation point and hang】
It's easy if you've done your own footpeg replacement.
[Was the Instruction Manual easy to understand?
Not included.
[Included Parts:were they on?
Bolt is also included, but it is quite long.
[Others]
nothing special
View detail
It's going to bite you right in the ass
Because the Knurl processing part of the footpeg that was used has worn out, I bought this time It was
Lineup includes BlackorSilver Footpeg Collar and Step end You can choose your favorite color of the resin part of the resin, Black or White, and a combination of each It is
There is SpeedShopIto's Repair Parts for Footpeg Kit, but If the mounting screw diameter and pitch are correct, you can use the
You can use it for any footpeg I used it on the Rear Sets made by Rye TEC
The footpeg I've been using has been a lot of GizaGiza, like a grater This footpeg is not processed as such
It has a footpeg shape like a notch shape
I haven't run it yet, but I think the Grip performance is excellent
Perhaps it is because the mountain of the shaved part is higher than the footpeg of the GizaGiza shape, but it is deeper in Boots It feels like it's biting and doesn't feel like it's slipping
Also, the end part is another high mountain, so it's a good idea to hold it there as well It also provides a high level of peace of mind
If you look closely, you can see that only one end of the notch is sharp, and this is what makes it possible for the weight to be applied You'll also find that the structure of the boot is designed to bite into the Boots
Personally, this is definitely better than GizaGiza's Knurl-processed footpegs! I was impressed
However, I think that the Boots will be highly aggressive to Sole Sole will be damaged if you ride with the load too aggressively
So, The thing is, Boots is bigger If you're not a fan of Why don't you just change it when it's falling apart? I highly recommend it if you have a split idea of what to expect
Honestly, Kawasaki's Z series, OthersVintage motorcycle Custom partsManufacturer Image was From SpeedShopIto, a
I didn't think there was a footpeg out there dedicated to the racing scene like this one! These racing parts are quite expensive, but this i'm happy with the price at footpeg
Also, the reduction of the notch and the life span of the notch Also, as a point of concern, the rigidity of the footpeg, which is Aluminum Cut-out There is a sense of rigidity of the degree, but the entire footpeg is hollow in the back, and is a rather thin-walled I've received an image
I'd like to see how the footpegs will be bent when the load is applied If I get a meaty footpeg with this shape, I will REPEAT 200%
View detail
Fits: KAWASAKI KZ system, KAWASAKI KZ series, KAWASAKI KZ series
Front axle15mm→for conversion to 17mm
J's OEM wheels have 7 holes in the discmount, and many of them have a small outer diameter disc I didn't like the dirt accumulation in the shape of the wheel
So, I changed the Axle to 17mm with the replacement of OEM wheels for the models with high expansion capability Z's Outer tube is old fashioned mount structure It's great that you can change the axle diameter with just one clamp change
View detail
Setting parts
0.I was using two 8's, but I wanted to try it out with a slightly higher rate, so I bought one 0.9 I added 0.8 and 0.9 and divided it by 2 to get 0.85 It got better You can cut and stuff the collar that comes with the Initial Adjuster to make the basic length different from each other It's used, and I appreciate that it's engraved with 0.9 on the edge of Spring View detail
Fits: KAWASAKI KZ system, KAWASAKI KZ series, KAWASAKI KZ series
For OEM diversion modification
Security Standard Corresponding Product (Japanese Vehicle Inspection Correspondence)
Color Temperature:6500K
Brightness:2400lm
Power Consumption:It is useful when using 3A/36W wheels on Z1000J series forks It's light weight, but the accuracy is very good Anodized is also hard and well made
View detail
I wanted advance information on installation method
Shape, creation etc. I am satisfied with the completeness of the product.
However, in my case it was a product that would require processing on the Frame side.
In the manual, Normal change pedal Although explanation is given to boss off, if you do not cut the boss itself, you can not match Change Pedal to the position you thought. It shaved about 7 mm..
Also, if you match Change Pedal to a position you did not cut Boss Body, Side Stand (Raised state) It interferes with, and the change pedal is at an angle too low, and in my case it was impossible to shift shift.
Personally, it is what I wanted to know before purchasing.
For example, I wish I had a description like the one below.
[Description example]
(1) There is a case that needs processing on the Frame side. Where is the processing place ...?
(2) Banjo, Pressure sensor - please prepare ... or (MASTER is attached)
(3) Schematic drawing (photo etc etc). Please refer to ... or
After all, it is the feeling that you have found the necessary parts after starting installation.
By the way, about Position is not 5 Position. It was a 1-position. Is the explanation old?
I would like to have accurate information.
Basically if you are selling for general users, I think that it is not necessary information.
View detail