Reviews
I wonder if anyone is still buying this carburetor?
At first, I bought it thinking that I could pimp it from NORMAL.
I can put it on, but I can't adjust the throw at all.
I bought several kinds of Slow Jet and worried about it for about 3 months.
Throttle valve, remove CutterWayValve.
I compared it with the NORMAL, and the shape was different from the NORMAL, and the adjustment Screw was almost ineffective!
Fortunately, the NORMAL and Size were exactly the same, so I was able to solve the problem by recombining them.
After all, it was the event that I thought that the Chinese cheap goods purchase was something, Large strange.
View detail
Impression used
The welds are messy, though they look nice at first glance.
The Blowby insert is thicker and much shorter than the picture, so it is difficult to plumb.
I think it's an effective Parts for about 3000-6000 revolutions.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI Address 110
Caution! OEMAir cleaner must be processed!
First, a note of caution.
OEMIntakeHose is not reusable.
Because Air Cleaner BOX and Hose are also separated, the person who wants to return Air Cleaner BOX and does not have Coking material, etc. will exchange the whole Air Cleaner BOX. Please note!
? Cannot be poned. There is cutting processing as shown in ?
About the installation.
It is simply constructed by plugging the OEM IntakeHose into the included Stainless Steel tube.
The Stainless tube is thicker than the Intake Rubber hose, so it can hold more Garbage in the carburetor. If it is not good, Small insects etc. can also enter.
If you don't want to break the Motorcycle, you need to seal the connection here. I used Grip bond on the entrance side of the Intake and glued it to the stainless tube, then sealed it with heat resistant aluminum tape.
Once safely installed, the first thing you'll notice is the Clearance with Monoshock.
If you have an external Shock, it is likely to interfere.
I'm also going to put in a KITACO for DIO110 in the future, so I'll offset it a little more outside.
As for the sound, it is a combination with Beams HeatTitaniumSP, but the bass sound when Torque is applied from 40km/h to 40km/h became as loud as a big scooter.
If you don't open the Axel, it's quiet, but if you're driving on a national highway, you might get pulled over by a policeman…?
General Comments.
This is an Exclusive Design product, but it's poorly made.
The Instruction Manual is flimsy and hard to understand.
It requires a lot of processing.
There is no need to be Exclusive Design.
Looks and sounds alright.
View detail
Fits: HARLEY-DAVIDSON For vehicles equipped with S&S Teardrop Air cleaner and High flow Air filter kit
rusted
There was a bit of Rust at the Bolt hole, which was a bit disappointing. View detail
Fits: Others Universal
Choke Cable for Big carburetor
When I installed Big Reed Valve, Big manifold and pe28 carburetor in gAXIS, it was troublesome to open the lid of the lower front side of Seat every time when I started the engine and to stretch my finger to the carburetor and pull Chalk. So I changed to KOSO's Choke Cable for Big carburetor, but KOSO's Choke Cable has less margin for pulling Chalk than pe28's Chalk Cable.
The appearance and convenience are good, so I thought it would be good if they improved that area.
View detail
It's melted.
The Washer melted when it was idling for about 40 minutes in the outdoor temperature of about 25-Degrees for RECS installation.
At this rate, I'll melt in mid-summer traffic.
I don't think you can use a hot breather Washer in the middle of summer traffic in Japan.
View detail
Fits: SUZUKI GSF1200 BANDIT 1200cc All, SUZUKI GSF1200 BANDIT S 1200cc All, SUZUKI GSF1250 BANDIT 1250cc All, SUZUKI GSF1250 BANDIT 1250cc All, SUZUKI GSX1250FA 1250cc All, SUZUKI GSF650 BANDIT S 650cc All, SUZUKI GSF650 BANDIT S 650cc All, SUZUKI GSF650 BANDIT S 650cc All, SUZUKI GSF650 BANDIT 650cc All, SUZUKI GSF650 BANDIT S 650cc All, SUZUKI GSF650 BANDIT S 650cc All, SUZUKI GSF650 BANDIT 650cc All, SUZUKI GSF650 BANDIT 650cc All, SUZUKI GSX650F 650cc All, SUZUKI GSX650F 656cc All, SUZUKI GSX650F 650cc All, SUZUKI GSX1250FA 1250cc All, SUZUKI GSX1250FA 1250cc All, SUZUKI GSX1250FA 1250cc All, SUZUKI GSX1250FA 1250cc All
Are you sure it's compatible?
I bought this product because it is compatible with the BANDIT 1250F.
This is a replacement for the OEM Filter, which is the same size, but the part that fits into the air cleaner box is a little different.
The Air cleanerBox has grooves on both the box body and lid to fit the filter, and the OEM filter has folds on both sides, but the replacement only has folds on one side. The OEM filter has folds on both sides, but the replacement has only one side. This makes the box thicker, but not impossible to install, so I had to tighten the bolt forcibly while pressing down on the lid.
If you are inexperienced or clumsy, you might lick the Bolt or give up because you can't install it.
YOSHIMURA Sticker of the attachment is grateful. Stick it as a landmark on the ski board.
View detail
Fits: YAMAHA Tenere 700, YAMAHA MT07, YAMAHA SRX700, YAMAHA FZ07
Simultaneous installation with Air cleaner of the same manufacturer
Air Cleaner Box Refreshing considerably!
With that wide an inlet, you'll get more inhalation.
However, less than 10,000 yen is expensive for that many parts. (Lol)
We use it with Full Exhaust System at the same time.
It's quite effective, but ECU re-setting is a must.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI NINJA650, KAWASAKI Versys 650, KAWASAKI Z650
high
It's not very accurate for being expensive.
It was warped from the start and the back lid wouldn't close.
Power is definitely up, but I think the experience of Tandem and not Tandeming is an overstatement. 。 I feel like a 60kg difference in 250cc would make a significant difference in performance.
View detail
It didn't work.
I used it with the ELIMINATOR 250.
The Parallel twin's Carburetor is recessed and inaccessible in the on-board condition.
So I bought this Special Tool, but unfortunately it didn't work.
I thought the tip was about 90-degrees of flex, but it's actually about 100 degrees and a bit open.
This is why the Cell Motor under the Carburetor is in the way and cannot reach the Screw.
I don't think you can use the same type of Engine, GPZ, GPX, KLE, ZZr, because the carburetor arrangement is the same.
Well, to begin with, the later years of ZZr's have the Screw hidden by the Carburetor Heater plumbing, and no tool can reach it ……
I was disappointed because the quality itself is very nice.
View detail
Request for return
This item also belongs to a Garage T&F manufacturer, but I don't know which manufacturer it is from the packaging. There is an instruction manual inside, but there is no company name there either.
I'm not sure of the Manufacturer and have requested a return, but have not received a reply yet.
If you're buying here, a trowel is usually the way to go...
View detail
Durability issues.
In three years, most of my products with Rubber have been ruined; the ORing has lost its elasticity and snapped, and some of them are crushed, deformed and scuffed.
Material:It is not possible to think of this as an OEM product. I want you to improve the quality.
I'm very sorry, but I gave up on Parts with Rubber and bought all of them back to OEM. I want to ride non-Trouble for a long time.
I use Needle and Jet products, and the Jet products alone are a good value for money.
View detail
Fits: Others MikuniVMΦ26Carburetor, Others MikuniVMΦ20-246Carburetor (discontinued)
We do not recommend it
I bought it as an overhaul of my long-time VM26 Carburetor Size doesn't fit in well with the large size
I wondered if I had made a bad choice, but there seems to be no mistake
After all, does the year of manufacture of the Carburetor make a difference?
This is a delicate area
View detail
Fits: HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR400R, HONDA XR400R, HONDA XR400R
I can't install it
It says OEM-compatible part number 17213-KF0-000, but the installation is completely different because the shape is completely different I can't
I want to make sure that the product information is displayed correctly
View detail
I don't smoke at all
It didn't smoke even with the 64mm Plate, so I put it on without the Plate, but it doesn't smoke at all yes
By the way, it's 50cc
Also, this second instalment
Don't just delete the inconvenient imprints, We-Big
You thought you were fooling me with an apology email
I'm writing this so that other people don't lose money buying this
View detail
don't!
It didn't smoke on Plate64 either, so I tried Plateless and it didn't smoke
I went back to the air cleaner I originally had on,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
、、、、、、、、、、、、、、
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
You can use it for now
I think it's thinner than OEM
It flips over when gasoline is attached (Rounding up.)
It's not leaking and can be used if you are careful when installing it
Could it be that you're taking into account that it's getting old and expanding?
View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000 (air-cooled)
Hard enough to pull
It is completely different from the OEM Rubber quality It's just like plastic The atmosphere of deterioration is a bit scary
When I inserted the CR Carburetor, I had to use a lot of force as if the body might be distorted It was
It seems to me that once you put it on and the Engine heat is turned on, it will be easier to insert and remove it, but maybe it's an OEM You should buy it
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, Others
It leaked at 50%
There are four Float valves in it, but two of them leaked
I bought it because We-Big carries it and the price was low, but the OEM is still the best! Yes
View detail
Fits: HONDA livudio, HONDA livudio, SUZUKI Verde., SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, HONDA baton, YAMAHA TZR50, YAMAHA TZR50
There was neither possibility nor impossibility, and it was enough for the test run for now
There are cheap but cheaper ones for cheap
If it says that it is something like this with Power Filter it seems so, but if it got wet it could not be used for a week
I felt clogged and let me dry out and seeing inside the gold net rusted and it was rash
View detail