Reviews
Somehow...
The embrace has softened a bit... I wonder?
I did not understand Response for Throttle.
Maybe it's my own fault for being insensitive. I think it's a good product if people who know what they are doing get on board.
The KIJIMA Engine Guard is attached, so it could not be installed in its original position, so it was moved to a new location.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO
I was hoping?
In the product introduction photo, it looks like a Push rod Rubber.
I was expecting Large...
After installation, I checked and it was only half hit.
In the first place, half of them seem to be hit even in NORMAL.
I got the impression that there were a few more hit surfaces, but not as many as I had hoped for.
The construction is good, but it's not surprising considering the price.
Cost performance is poor
Hoping for a protective effect?
I gave it a 3 star rating.
View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
Color
The color gave the impression that it was brand new. View detail
Installation is exasperatingly Large strange.
If you work with the OEM Exhaust System, it will be very large and you need a universal joint tool. It might be faster to remove the Exhaust System first. By the way, even if you install the OEM Exhaust System, you can't see the installed parts when you look at it from the front (lol). View detail
Fits: YAMAHA WR250R, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CB400SF, HONDA CBR1000RR, HONDA CB1100, YAMAHA CYGNUS X, YAMAHA Majesty-S, YAMAHA NMAX, YAMAHA WR155, YAMAHA WR155R, YAMAHA WR250X, HONDA Dax70, HONDA Dax125, HONDA APE100, HONDA PCX, HONDA PCX150
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
Necessary items to connect to Air cleanerBox
Not necessary if no Air cleanerBox is available or cannot be connected. View detail
Quantity:Set is convenient
Quantity so you don't get lost when buying.:Set sales are very convenient View detail
Fits: YAMAHA RZ50 (New), YAMAHA TZM50, YAMAHA TZR50 R, YAMAHA RZ50 (New), YAMAHA TZM50, YAMAHA TZR50 R
I bought it because there was no OEM Product.
I purchased this product because OEM Product is not available.
It blows up more energetically than NORMAL! I am satisfied with the feeling of use, but the price is high. The price is high, but it is an old car so it can't be helped.
View detail
Fits: KAWASAKI NINJA600R C1-10, KAWASAKI Z750GP, KAWASAKI Z1000R, KAWASAKI 1000GTR, KAWASAKI EN400, KAWASAKI Eliminator 400, KAWASAKI Z750FXII/III, KAWASAKI Z750FXII/III, KAWASAKI Z400LTD, HONDA GL1200 Gold Wing, HONDA CBX1000, HONDA CB900F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F
Magnetized, higher than OEM
I always use OEM, but this time I switched to KIJIMA's Magnet. We will see how it goes. View detail
Fits: HONDA Giorno, HONDA jorio, HONDA G DASH, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA SUPER TACT
It didn't fit the GYROX mid-term.
It did not fit GYROX (TD01-17~).
The diameter of the thickest part is too thick and pops out even though it is shaved down a little to put it in.
I made my own Bracket and attached it with Rubber packing to hold it down.
View detail
Fits: HONDA MONKEY, HONDA CRF50F, HONDA XR50R, HONDA solo, HONDA GIORCUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA DAX(12V), HONDA JAZZ, HONDA MAGNA50, HONDA MOTRA, HONDA CHALY, HONDA MONKEY R, HONDA MONKEY RT, HONDA CD50, HONDA BENLY50S
Bore up to 85cc
Bore up from 75ccBore up to 85cc.
The aluminum material used for the cylinder gives it a more luxurious look and feel.
I can't comment on durability, as I don't know how long it will last, but I think it is sufficient as a bore up that can be done with a normal head.
View detail
Fits: HONDA CT110 HUNTER CUBCT125, HONDA CT110 HUNTER CUBCT125
The effect is...
I saw a review that the Engine turns Smooth, so I installed it.
As for the effect, do you think it makes much difference? I would say that there is not much of a difference.
Engine braking will be Mild, so if you are interested, you can install it.
Product texture is good, no BALI or rattling.
Installation is easy, and removing the exterior of the CT125 is more of a hassle.
Since it is necessary to cut the tube, we recommend using a tube cutter if you want a clean finish.
View detail
Gasket
OEM Product is a little expensive, so here is a substitute.
It is aluminum, so it has an appearance, but if it can be sealed, it is not a problem, so I thought the low price was a good thing.
View detail
with Magnet
I bought this to replace Oil's Screw for Drain with MagnetBolt.
It's not that expensive, it's brand new and it's beautiful now.
Steel, so I guess it won't be clean next time I change the Oil….
Magnet, we are looking forward to iron powder Catch in Oil and see how it goes for a while.
View detail
Fits: DUCATI DESMOSEDICI RR, DUCATI DIAVEL CARBON, DUCATI DIAVEL DARK, DUCATI DIAVEL STRADA, DUCATI DIAVEL, DUCATI GT1000, DUCATI HYPERMOTARD 1100 evo SP, DUCATI HYPERMOTARD 1100 evo, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD, DUCATI HYPERSTRADA 939, DUCATI HYPERSTRADA, DUCATI MH900E, DUCATI MONSTER 1000 DARK, DUCATI MONSTER 1000 S
OEM and Filter wrenchSize are different.
I used it on a DucatiMULTISTRADA 1000DS that I bought used.
We don't know when the Oil Filter was replaced, so we replaced the Oil Filter as well, just in case.
MULTISTRADA 1000DS is a so-called air-cooled DesmoEngine, so the same kind of engine has been used for a very long time.
I think all SS900, Monster series and even HYPERMOTARD1100 or so can be used together, maybe SCRAMBLER1100 too.
I honestly don't know about the functionality, I haven't felt any difference in filter performance, but I'm sure it will be large and sturdy since it is DAYTONA under the sun.
One point that is unexpected.
DAYTONA Oil Filter for Ducati is different from OEM Oil Filter in wrench size.
In other words, the filter wrench for OEM can remove the OEM Oil Filter, but cannot tighten the DAYTONA Oil Filter….
The Filter wrench that can be used for this Oil Filter appears to be FOR HARLEY.
Since I was in a hurry, I tightened the brown by hand with full power (I tightened it later with another Daytona Oil filter wrench).
View detail
Fits: GASGAS EX450F, GASGAS EX350F, GASGAS EX250F, GASGAS EX300, GASGAS EX250, GASGAS EC350F, GASGAS EC250F, GASGAS EC300, GASGAS EC250, GASGAS MC450F, GASGAS MC350F, GASGAS MC250F, GASGAS MC250, GASGAS MC125, GASGAS MC85, GASGAS MC65, GASGAS MC50, HUSQVARNA 701 ENDURO LR, HUSQVARNA 701 SUPERMOTO, HUSQVARNA 701 ENDURO
Substitute because OEM cracked and broke.
I bought it like a 2017 HUSQVARNA TE250 which I always use for forest road Touring.
The OEM Plastic cap was broken in a fall, and we had no choice but to replace it.
I really wanted Blue, but Webike had it in stock, so I bought Red because it would arrive soon.
Installation was super easy, just tighten it down.
Glad to see Red in One point.
View detail
Fits: その他 , HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP
The magnet!
When I was looking for a drain washer to change the oil, I found this one and bought it because there was only about a 100 yen difference between the one with magnet and the one without. I am not sure yet if the performance is as good as the product description, but I have high hopes for it. View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF1200S, SUZUKI GSF1200ST, SUZUKI GSF1200V, SUZUKI GSF1200SV, SUZUKI GSF1200SAV, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
usually
It is an ordinary Oil Element.
I cannot tell the difference from other products.
View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Cospa is nice.
The box says Dualfor Clutch, but no problem, CROSSCUB110 (JA45) It can also be used in
I replace the Filter every two Oil changes.
Cost performance is the best because it is cheaper than OEM
View detail
Expect ResponseUP!
I bought a Z125pro and due to snowfall in Hokkaido, my car hibernated before I could ride on public roads. I installed it because it was highly rated in everyone's Impression. I don't know how it compares to the other ones, but I'm looking forward to the next season! View detail