Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Installation of groundwork
Purchased for Point cover installation.
Since all you have to do is remove and attach it, I think anyone can do it easily.
Only 1 pc of Screw lock agent will be attached, so preparation is necessary.
View detail
Fits: KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI D-TRACKER-X, SUZUKI 250SB
Red purchased as a landmark.
It seems that the dirt does indeed stick to the tip of the Bolt when changing the Oil, but I'm not sure how effective it is. It just makes me feel like the dirt is sticking to me. LOL! View detail
It's a hassle to search and ask for help! For those who want to
In the overhaul of SEROW225, I disassembled the upper waist, so I needed a whole set of Gasket.
I thought that OEM is the best in terms of quality, but if I accumulate a lot of intentions, it will cost a certain amount of gold, and there were some parts that I was not sure whether to change or not, so if I can replace all of them at this price, it is easy.
The quality of the product is absolutely fine. It is totally usable.
View detail
Fits: YAMAHA TENERE 700, YAMAHA MT-07, YAMAHA XSR 700, YAMAHA TRACER 700
as a stake in a difficult situation
Material:Since it is plastic, it may not be as good as gold as protection for the engine case, but it has a thicker wall and a considerable cover range, so it is likely to be effective. In any case, I am quite satisfied with this product because of its good design. View detail
![Lightweight Flywheel [Stock Modified]](https://img.webike-cdn.net/catalogue/images/122501/07021926_5b39fdde38e85_TS.jpg)
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
steering wheel
This product has a lower weight than the stock steering wheel, which allows for greater motorcycle performance. The park received it in excellent condition, although the packaging was torn as if the piece had been unpacked before, although the product was in excellent condition. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII
Oil leak in the Tachometer port of the MKII.
I purchased this oil seal because I was experiencing oil leakage from the Tachometer port on my Z1000MKII. I have had the motorcycle for 5 years and the shop had replaced the oil seal with the same product made by PMC before I bought the bike. I wish I could have purchased those parts and repaired it at a lower price. I wish We-Big would sell repair parts for ORing and Oil seal. 。 I would like to buy OEM Parts next time to see if the ORing and Oil seal from KawasakiOEM Parts will work. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX, HONDA CD50
GORILLA
Street driving is much easier now. National highways are no problem.
But not the highest speed.
Next up is a five-speed.
View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
I still feel safer with the Bolt stop.
OEM Cap." Than Screw bolt." looks better. It also provides some Prank protection. I also put a Plastic bolt cap on mine.
It goes on the 2023 CRF250RLY50MD47 with no problem.
View detail
Installed on ADV160
Installed on ADV160.
We knew the effect of Universal's One-Way Valve on CROSSCUB110, but we wondered how it would work on Scooter and tried to install it.
The CUB was more noticeable in the reduction of the embitterment, the revs were lighter at higher RPMs, and fuel economy is yet to be seen.
In general, the CUB was more hesitant to show its effects.
Installation on the ADV160 can be done by hand through the gap, so it should take no more than 10 minutes.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 400, KAWASAKI NInja400R, KAWASAKI VERSYS1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
economical
I bought the Oil Filter ahead of time because I will be replacing the Oil Filter at the next Oil change.
It is a great value and helps because it comes with the necessary Packing in addition to the Filter and you don't have to buy more.
If there are no problems after using it, I would buy it again.
View detail
Fits: YAMAHA Dio bore up vehicle, YAMAHA Gyro Bore Up Vehicle
Used for repairs.
Clip went out and Cylinder scratched, and since it was so hard to find, Bore up.
The NORMAL Head hits, so replace it with this one.
It works fine
Full acceleration has not been done, so future endurance is unknown.
So far I am satisfied.
I guess I'm not happy with the changing length of Plug.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-STROM250SX, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G8, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125LIMITED, SUZUKI VECSTAR125, SUZUKI VECSTAR150, SUZUKI GEMMA250, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type SS, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Basic
safety
The product is a Replace product from a well-known manufacturer, and of course, there were no defects.
It is often cheaper than OEM or in stock, so it would be good in that case.
Personally, OEM Product is the best, but Foot Motorcycle uses this one.
View detail
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
Oil Element
I buy Bessler Oil Element every time.
No problems with the installation.
Thank you for your continued support.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100EVO, DUCATI Hypermotard 13-14, DUCATI HYPERMOTARD SP, DUCATI DIAVEL CARBON, DUCATI DIAVEL CARBON, DUCATI DIAVEL CARBON, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Touring, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER S
Oil change essentials
[How is it used?
PCX125 JF56
Purchased for oilfor replacement of CBR600RR PC40.
I was looking for something with a small number of pieces to go home on the Net, and since it was a DAYTONA product, I bought it.
How was your experience with it?
It is like a normal Washer.
I used it when I changed the oil and the fit with the drain bolt was perfect.
After replacing the oil, I have been able to use it without any problems, including no leaks.
I will purchase again next time.
How did it compare to other products?
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
It is KITACO after all.
KITACO has a rich lineup of fine dress-up parts. I am satisfied with the quality. The instruction manual says to remove the cell motor once and to install the ball point hexagonal wrench, but I was able to install it normally. View detail
Used for Buell XB 2005 Head
COMTEC Quantity:When I bought the Set product at another store, the Gasket on the Head cover was an XL type, so I bought it here.
It was compatible with Buell XB 2005 head cover.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA MONKEY125, HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
The look and feel changes quite a bit.
You know what I'm talking about, but install it when you change the Oil. (LOL) It looks more luxurious and better than the OEM product! View detail
No other Size
Used for Horizontal TypeEngine HeadBreather Hose 650mm 6mm Diameter.
After searching for a compact product that could be directly connected to a 6mm inner diameter Hose, we found this product, which fits easily into tight spaces and meets our objectives.
Just look at the picture and Quantity:I bought it thinking it was 1 Set of 2pcs. but in fact it is Quantity:It was 1 pc. so it was disappointing in terms of cosmetics.
View detail