Reviews
Fits: HONDA CRF150R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250RX, HONDA CRF450RX, HONDA CRF250X, HONDA CRF450X, HONDA CRF450L, HONDA CRF450RL
When OEM is not readily available.
I bought this one in stock because the OEM was Timing which was not readily available.
There are naturally no problems with performance, quality, etc., and we have the peace of mind of being a DRC.
Thank you for treating OEM Equivalent Product as a niche for Motocrosser as well.
Racer has a low Oil capacity and will be replaced as soon as possible.
View detail
Fits: HONDA little cub, HONDA CL50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CRF50F, HONDA CRF50F, HONDA jazz, HONDA MONKEY BAJA, HONDA MONKEY, HONDA BENLY50CD50, HONDA BENLY50S, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX, HONDA solo, HONDA CHALY 50, HONDA GORILLA
If you want to Bore up with Normal head, by all means.
Bore up + High Camshaft seemed to be perfect, but... ?Tappet sound is annoying.
?The RPMs are not as high as expected.
Why? I found out that the Spring of Valve is not good if it is set to "NORMAL", so I will replace it with &arrarrr;Reinforcement Type.
What is the role of Valve Spring?
Valve springs keep intake and exhaust valves constantly pressed against the valve seat of the cylinder head to prevent leakage from the combustion chamber.
The Valve is pushed down by the Cam, but when it returns, it does so with the force of the Valve Spring. The Valve must follow the movement of the Cam in order to produce a stable output.
The valve opens and closes once per cam revolution, making one round trip up to the largest lift. When the Valve Spring can no longer withstand the load (in reality, there are also problems with frequency), Surge-ing occurs and the Engine stops turning. In the worst case, the Valve or Engine will be damaged.
Surge ing When Valve does not follow Cam when the rotation of Engine is increased and Valve vibrates with unintended Timing.
Why do bore up cars need Reinforcement Springs?
If Valve Spring is NORMAL, Surge-ing is likely to occur at high rpm when using high rpm with High Camshaft. By the way, if you strengthen only the Valve Spring on the Normal cam, it only becomes resistance, but there is no Merit.
[Strengthening Valve Spring].
Literally, the Valve Sub Ring hardens itself. (Increases load-bearing capacity.)
Simply put, the Valve Spring Rate is increased to withstand higher loads at higher RPM.
[Effect]
When the Valve Spring is strengthened, the Cam pushes down the Spring, so the Engine Friction is increased. This will suppress the valve jump that tends to occur at high RPM range.
good point
◎No snagging up to high rpm and runs cleanly and without loss.
◎Tappet sound became slightly quieter.
◎They can maintain high rpm even on hilly roads.
◎for STD Head.
A bad point
▲Recommendation will not be made for Single Item replacement. Please do it by Overhaul around Head because it involves removal &arrarr;Valve removal/attachment, etc. of Sealinder Head.
The tool called "Valve compressor" needs to be prepared.
When the engine is running at high RPM, the Valve Spring cannot expand and contract in time with the Valve movement, causing ValveSurge-ing. 。 Reinforcement springs have stiffer springs, so they can be eased to some extent.
It is quite time-consuming to replace, but it is effective.
Whether you are going to do it yourself or ask the Shop to do it for you, we will recommendation!
View detail
![[Repair Parts] Hose Connector](https://img.webike-cdn.net/catalogue/images/16640/00-00-0220_01_TS.jpg)
Perfectly sized for reduced hose size engine breathing applications
About quality and texture - The hose connector from SP Takegawa is made from a hard plastic material with a transparent white finish and the quality from the overall fit and finish is perfect. About the feeling of use - The hose connector is perfectly sized for engine breathing applications where you have a regular sized hose that is required to be reduced to to a smaller hose for your small barbed hose fittings on your oil catch tank or air filter pod, which I have both of on my Honda Monkey 125 but is only to be used with air systems and not oil or fuel. Products to buy together - The hose connector does require to be firmly secured to the breather hose, the use of zip ties is not my preferred method as a permanent solution so the use of specifically sized 9.5mm and 13mm hose clamps from SP Takegawa is what I would recommend. Difficulty of installation - The installation of the hose connector is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use a basic hand tools is what is required. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hose connector is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the hose connector, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
![Replacement Oil Filters [10 pcs]](https://img.webike-cdn.net/catalogue/images/117775/35200_TS.jpg)
Fits: HONDA GB500, HONDA XR400, HONDA GB400, HONDA CL400, HONDA CB400SS, HONDA CBR250R, HONDA CRF250, HONDA REBEL250, HONDA AX-1, HONDA XL-DEGREE, HONDA CB250F, HONDA CB250R, HONDA CBX250RS, HONDA CBX250S, HONDA GB250, HONDA XLX250R, HONDA XLR250R, HONDA XR250, HONDA FTR250, HONDA TLR250R
Buy wisely in bulk! Recommendation for those who own several motorcycles!
10 pieces Quantity for business use" at a great price:The "Set" is a great recommendation for those who own several motorcycles, because you can buy them in bulk at a low price! It may seem like a lot to have 10 sets at once, but I have a Ninja 250SL and a Z125, and the discount is very helpful for me! View detail
Fits: KAWASAKI KLX230R, KAWASAKI KLX230S, KAWASAKI KLX230RS, KAWASAKI KLX230SM
Quantity:Set, so you only need to order once.
Engine oil and filter change of KLX230R was carried out. Large would be sturdy. I've been skipping it, but it's been two years since I bought it, so I decided to replace it. However, I thought it would be a hassle to look up the Parts number, and then I found this wonderful Quantity:I didn't know there was a Set, I didn't compare the cost with OEM, but the price was not so low that I was concerned about it, so I decided immediately. And the filter replacement was no problem, even the Gasket and O-ring are brand new and I feel good about it. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA CHALY 50, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY BAJA
Required if Bore up.
When the engine displacement volume is increased by bore-up, the scale of explosion becomes larger than that of the OEM, and the oil pump designed for 50cc of the OEM cannot keep up with the oil circulation. Therefore, we introduced the Reinforced Oil Pump.
[Oil pump's role].
The oil pump pressurizes and pumps the engine oil to circulate it to the various parts of the engine. 。 This enhances lubrication, cooling and cleaning effects.
[What happens due to lack of Oil circulation.
→ oil film breakdown and increased oil temperature.
The oil pump sucks up engine oil that has accumulated below the waist and circulates it above the waist. (The oil then flows back into the lower back to continue circulation.) Cylinder Cylinder head Camshaft Piston Therefore, if the oil cannot circulate properly, there is a possibility that these parts will break. To explain this in a simple way, if the oil film on the parts runs out, the parts will be damaged and the oil will be lost. [Burns in] it appears as if ... 。 Naturally, parts that are seized are unusable and must be reassembled.
Effects of Reinforced Oil Pumps
Circulation of the proper amount of oil reduces the burden on the parts of the drive unit. 。 Also, by increasing the Engine Displacement Volume, a larger volume of oil can be circulated to the engine, which generates more heat and thus cools the engine even more.
*OEM oil pumps are designed for OEM for 50cc, so if you bore up, you will have to reconfigure the oil pump with an enhanced (higher discharge) oil pump to match, or the oil will not be circulated in time.
This Oil pump has a capacity = amount of Oil to send 。 If OEM Product is diverted, the capacity will be as follows ： Assuming that 50cc is 1.0, it is about 1.8 to 2 times larger.
good point
Heat generation from the Engine after driving has subsided.
Even if you go for a long ride and turn it around a bit, there is no longer any heat drop.
Idling is stable.
A bad point
I also removed the oil, removed the →clutch cover, and replaced the →gasket.
It's worth changing, though (laughs).
When you bore up the engine, it is strongly recommended to install a Reinforced Oil Pump. If you are looking for a domestic manufacturer, SHIFT UP is the cheapest.
If the Bore Up Kit you purchased becomes useless because you were too stingy with the Gold amount, the cost will be large…. 。 Some of you may have assembled the Bore Up Kit with the NORMAL oil pump, but it is not a stingy PARTS, so I recommend not to drink that opinion too much.
If there is room, it would be even more effective if the orifice of the oil coming out of the oil pump is enlarged.
View detail
Fits: YAMAHA SR400, YAMAHA SR400C, YAMAHA SR400S, YAMAHA SR400SP, YAMAHA SR400LTD, YAMAHA SR400 Final Edition, YAMAHA SR400 Limited
Replace and no harm done!
Oil Filter is always involved when changing engine oil.
The filter interacts with engine oil.
[Engine oil]. ‥
Engine oil is exposed to a harsh environment of heat and friction. Lubrication." Sealing action." Cooling action." "Clean dispersion." Rust inhibitors." Engine oil deteriorates due to heat, oxidation, and impurities called sludge, so it must be replaced periodically. The filtration function of the Oil Filter absorbs impurities and maintains the effectiveness of the engine oil.
→ Since there is an interaction, the Engine oil and Filter are used in the Quantity:It should be considered as a Set.
What is Oil Filter? ‥
It is folded in a pleated shape and collects sludge and gold fragments adsorbed by engine oil. The engine oil is filtered directly through the circulating engine oil. Simply put, it is a filtration device for engine oil.
Filters become black and discolored with dirt after continued use, and gradually become clogged.
As the Oil Filter becomes clogged, its filtration action weakens, and periodic replacement is necessary to maintain its performance.
What happens if the Oil Filter is not replaced?
▲Contamination inside the Engine may increase, making it difficult for the Engine to start up properly.
→ Oil Filter is clogged and dirt in the engine oil gradually accumulates in the engine. 。 This will worsen fuel consumption and reduce engine performance. If the engine is not replaced on a chronic basis, the life of the engine may be shortened.
Oil Filter replacement frequency ‥
The standard replacement frequency for the oil filter is once per two engine oil changes (oil replacement cycle is every 6 months or every 5,000 km of driving distance).
*This is just a guideline for Manufactureretc. If it can be replaced, it would be even better to do it every time for Engine.
Effects of Oil Filter Replacement ‥
It prolongs the condition of engine oil, prevents impurities from accumulating in the engine, facilitates piston movement, maintains engine performance, prolongs engine life, and keeps the engine in good condition for a long time.
This time, I have purchased not only the Oil Filter only, but also a quantity of packing items such as Drain bolt, Filter cover, etc. which should be replaced at the same time when replacing the filter.:It is a Set.
【good point】
◎FilterBody joints have no roughness and are well built.
◎Packings are also enclosed, so there is no need to purchase additional packing separately when replacing.
◎Considering the price as a complete set, it is inexpensive.
[Notes]
When removing and installing filters, it is necessary to remove the cover and take out the filter.
Engine oil after driving is very hot, and there is a risk of burns when working on it, so please do it before starting the engine or when the engine is cool.
The drain bolt and packing can not be reused because they are in contact with engine oil, which deteriorates them and makes them less effective in sealing.
In my case, I replace the Oil Filter at the same time every time I change the Oil.
As for the effect, it is hard to perceive the physical effect, but it works as usual without any glitches. I feel that →this is the effect.
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
on the button
Exactly matched to Carburetor
I was having problems with leaks due to deformation of the Drain, but now I have a solution.
It looks like DeepBolt, so it may be a good measure to prevent oil level changes
View detail
Fits: HARLEY-DAVIDSON XL SPORTSTER, HARLEY-DAVIDSON XL SPORTSTER 91-94 (StarterHousingScrew), HARLEY-DAVIDSON FL 85-96 (Air-conditioner trawlSolenoidLower)
Gasket
I have not used it yet, but it is cheaper than OEM and looks durable. View detail
It's a great cosmetic
Used to Refresh MAJESTY 125.
We chose the Bore Up Kit because we wanted to do something about the inefficient acceleration if we were going to do it anyway.
It is much cheaper than OEM Type Cylinder, but the quality and precision are perfect.
Since there is no instruction manual included, I think it will be quite tough if you do not have the skills to make your own motorcycle loose to some extent.
It seems that the 160cc engine finally has the acceleration power that is commensurate with the large size of the body.
I think it will be much easier to overtake, start at a traffic light, and start at Tandem.
View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: SUZUKI GIXXERSF 250, SUZUKI GIXXER 250, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI BURGMAN 400
For Burgman 400
Pros: Efficient Filtration: The Kijima oil filter effectively filters contaminants, ensuring optimal engine performance. Durable Construction: The build quality of the filter is commendable, demonstrating resilience against pressure and temperature variations. Easy Installation: Installing the Kijima oil filter is hassle-free, making it convenient for DIY enthusiasts. Reasonable Price: Considering its performance and longevity, the filter provides excellent value for money. Cons: Limited Availability: Depending on your location, finding Kijima oil filters might be challenging compared to more widely available brands. Lack of Advanced Features: Some competitors offer additional features, such as anti-drainback valves or textured grips, which must be included in the Kijima filter. View detail
Fits: YAMAHA JUPITER MX, PGO Tigra 150, PGO Tigra 125, YAMAHA CZD250-A, YAMAHA FAZER25, YAMAHA FAZER25, YAMAHA FAZER25, YAMAHA FAZER25, YAMAHA FZ16, YAMAHA FZ25, YAMAHA FZF250, YAMAHA FZN250, YAMAHA FZSF1 (FZN150-A), YAMAHA FZSF1 (FZN150D-A), YAMAHA JANAS, YAMAHA MTN155-A, YAMAHA NOZZA GRANDE, YAMAHA T115 ECD, YAMAHA T135, YAMAHA T135SE
r15m Oil Element
It is easy to install. I would ask for it again. View detail
The softness made it easy to handle.
Used to drain Blowby. View detail
Exactly
Mounting on Hose end
It's good to dress-up a bit.
View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1100, SUZUKI GSX-R1100W
I like that it contains everything I need to change the oil.
I bought one gsx-r125 and one katana, so there are two in the picture.
It's convenient to order because everything you need to change the oil, along with the filter, is included in one box. Now you don’t have to look through WeBike.
The price is cheap, as expected from Daytona.
I think I will continue to buy one in the future and use it when changing oil ---------------------------------------- ------------------ GSX-R125, Katana live one by one and two photos. It is convenient to order because it is all in one box that you need when you go oil with the filter. Now you can do it in the weaving The price is also cheap. As if I would continue to buy one by one in the future Powered by Google Translator
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., SUZUKI Gixxer 150.
I like that it contains everything I need to change the oil.
I bought one gsx-r125 and one katana, so there are two in the picture.
It's convenient to order because everything you need to change the oil, along with the filter, is included in one box. Now you don’t have to look through WeBike.
The price is cheap, as expected from Daytona.
I think I will continue to buy one in the future and use it when changing oil ---------------------------------------- ------------------ GSX-R125, Katana live one by one and two photos. It is convenient to order because it is all in one box that you need when you go oil with the filter. Now you can do it in the weaving The price is also cheap. As if I would continue to buy one by one in the future Powered by Google Translator
View detail
Genuine GBRacing Engine cover set for YZF-R6 2020
This set was purchsed for the a newish R6 that a customer wanted to try and keep the bike from any damage in case of an accident. Obviously, this is a really good idea as you just never know what minght happen on the roads. Finding the right set was not too difficult as I just added my bike model and details to the search on GBRacing website and this came up. This set does include the pulse cover, the clutch cover and also more inportantly the generator cover. The price of this set was cheaper than if you purchased them all separately so made perfect sende to get the set. Webike price was slightly better thamn I could source locally but these were not actually in stock at the UK supplier at the time I needed them. I chose as my preferred courier EMS, I use them as they get the orders to me fast and safely with no stress. The order arrived with me in 5 days from being shipped which is awesome. All the covers in the set were individually packaged and then inside a large sealed bag. The finish on these covers is really eye catching, even down to the name plate GBRacing on the sides of each cover. The packets all included every piece you need to attach including the spacers where needed. The composition of these is definitely not just plastic and upon further investigations by myself they are proven to withhold a lot more stress than a lot of other brands in this same category. Fitting was really straight forward as you also get a comprehensive set of instructions per cover. These do look excellent and I am confident in them. As for the customer, they are really pleased. Thanks Webike for the great job you do too. View detail
Required for disassembly work
It would be nice to have when doing overhaul.
I have searched and found that many people reuse the Crankcase gasket, but I think it is better to smooth the Crankcase gasket with oil stone and replace the gasket to prevent oil leakage.
I studied the initial overhaul with New Engine.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G8, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125LIMITED
We have all the consumables you need to replace Oil.
Purchased as regular maintenance.
DAYTONA is bundled with all the necessary O-rings and Gaskets that are encountered when changing Oil and Oil Filter, so they are purchased every two Oil changes.
I have used it on other vehicles without any problems, and because of DIY maintenance, I have to replace the O-rings every time to keep the oil leak risk to a minimum.
I will definitely Repeat next time!
View detail