Reviews
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200 Daeg
SPECIAL KnifeAgents NegotiatorSLimiter cut
I finally put it on, SPECIAL KnifeAgents Limiter cut
To turn on the power, press either Button and turn the key ON to turn on the setting machine.
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200 Daeg
Limiter cut
I haven't installed it yet, but I'm looking forward to it. View detail
The speed limiter is off and the circuit is safe.
I bought it because I will participate in the Circuit run meeting. The position of the body was difficult to install. I extended it to the bottom and stored it. WiringCut and attached Bullet Terminal seems to have Size Large size. For the sake of safety, it may be good to attach solder. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R Hayabusa
Limiter cut
Speed of GSX1300R HAYABUSA using FOR JAPAN MODEL The limiter can be released
The body is Compact, easy to set up and does not get in the way
The Japanese specification only has a speed limiter So I think it's more affordable to cut Limiter than to buy a reverse car
View detail
An error occurs in the 2008 SPMODEL
I got an Engine error and couldn't use it
I'm too busy to call the manufacturer, but I can't help you out right now
He said he would definitely contact me and hasn't heard from me in six months
It's too good to be true
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Essential items for running Circuit
I tried raising Tank to install it myself, but ... I gave up failing to find Wiring ... Gold was hung, but it was installed at the shop. At that time, the degree of satisfaction is high as we added the USB at the same time with the wage Service. Also, the other day, I was able to confirm that Limiter was canceled by Circuit. For those who run Circuit, they are essential items. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Required Items
Installation was a bit painful. Since there are few Spaces to accommodate Body, I worried while balancing Wiring's handling and fixing method. Under Rear seat there is ETC and it is impossible. As a result, I put a Sponge tape on Body and pushed it into the gap of ABSUnit under Seat. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000
Somewhat satisfied.
I used it for GSX-S1000F. Since it is a Japanese specification, Limiter is attached, we were considering canceling Limiter. Although ECU rewriting was also an option, considering Manufacturer guarantee etc. - - - I thought it was a retrofit kit and I thought that the other people's reviewetc. Decide on the Kit while watching. The function was as expected but I think it's a bit expensive. So ☆ is -1. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R Hayabusa
Satisfied
Mounted on a 14 year old falcon. For domestic specification, the function is two. One is mode 1 of 180 km limiter release. The other is to adjust the front and rear sprocket teeth number change. For overseas specification, three functions. Mode 2 of 300 km limiter release, mode 1 of 3 rd power enhanced mode 3. And correspond to the number of sprocket teeth. Mounting is made by connecting to the gear position connector near the seat near the seat under the tank and connecting to the connector for the vehicle speed sensor near the center of the left side cowl,. Since both are coupler connections, it is not difficult if you know which connector, but there are similar connectors, so you need to be careful. For this connection, it is necessary to remove the inner side, the under side, the left side cowl. The other last one needs to connect to the green and black wire from the ECU under the seat, and you have to cut it with courage. Since there is also Giboshi for connection, if you process it so that it can be reconnected when detached, there is no problem. The main body was installed under the rear seat. The number of sprocket teeth is genuine, front 17, rear 40. When changing the number of sprocket teeth, you can change this setting. I chose this because the genuine display can be used as it is for the gear position indication etc.. It is a color copy, but since the manual is included, it is good to do while watching it. If the price is about half price, I think that I bought it without trouble. Satisfied as things. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000
Good or bad
I am satisfied because I am not a part of the area that can be used on the public road on the lower road.
I am satisfied with just No Limit.
I think that there is no change in the performance, but the hole of the lid of Aluminum's case is Gap and it is angered that the lid is attached to the Slant slightly, but since it is installed in an invisible place, it compromises.
View detail
Fits: HONDA CB1300 A 14-17, HONDA CB1300 SA, HONDA CB1300 A 14-17, HONDA CB1300 A 14-17
Installation is simple
I do not have much trouble because I only remove Cover of Seat, Side Cover Left, ecu, the tool will need Electric Works Pliers or Solder iron, since I do not have anything to fix Body backwards I will go to Harit until Limit I stretched it and pasted it under the document bunt with Double-sided Tape. View detail
Fits: HONDA CB1300 A 14-17, HONDA CB1300 SA, HONDA CB1300 A 14-17, HONDA CB1300 A 14-17
It was easy to install with Wiring!
Speed ??limiter will be activated at 5th speed in the running meeting.
So, I was looking for Limiter cut of MODEL vehicle in 2014 and I found this.
It has a solid shape, additional functions include Speedometer error correction function when exchanging Sprocket, purchase without hesitation.
Installation was also easy. (It is necessary to Cut the vehicle Wiring by 1 pc and interrupt it in between.). Bullet Terminal terminal is bundled, but I kept wearing Solder. )
There was also a typographical error in the operation method of the Instruction Manual, and as a result of confirmation, Yellow Button was SW 2. f^_^;
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000
Attention to Wiring!
I installed it for speed limiter cut of GSXS - S1000F of Japanese specification.
For installation, it is necessary to replace the Coupler in two places with this Limiter cut coupler, and to partially interrupt the ECU Wiring.
* It is carefully written in the Instruction Manual.
Although there is no problem with replacing the Coupler, I mistook it for interrupting Wiring of BlackGreen for Wiring of GreenBlack by ECU's Wiring interrupt.
If you make a mistake, you can run, but the FI error is displayed and the Gear Position Indicator is displayed only up to 2nd gear.
I got to SPECIAL Knife Agents in the above state, so it was found that I mistook Wiring of BlackGreen and GreenBlack. Because it is very confusing, attention needs attention.
When correcting to the correct Wiring, no error occurred, the Gear position was displayed normally, and the Speed ??limiter was canceled as well.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Tentatively
I installed it in SC 59 of 2013. Tentatively Items. Since installation is troublesome, Wiringetc. If you do not have the knowledge please let Pro shop ask. Although it is CircuitOn Lee, Steering damper release is useful. View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200 Daeg
When changing Sprocket
I think that Speed ??limiter cut is the main purpose, but purchased for error correction of Meter when exchanging Sprocket. Compared to the previous VERSION, the mounting method has changed from Bullet terminal terminal to Connector. There is a sense of security with this person being able to connect firmly and it can be evaluated.
Body is also small, so it is not troublesome to install it in a place where rainwater does not enter. One disappointing thing is that the installation Instruction Manual has become old VERSION and I did not know how to enter the initial setting MODE. Even sending out there is a good product.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI BANDIT1250S, SUZUKI Bandit 1250F, SUZUKI Bandit 1250S
A brand name is a Magical racing although it differs. It is the same as that of a Speed pulse modulator.They are goods which there is also a compensation function of the Speedometer, and the speed limiter of a FOR JAPAN MODEL can also cancel the Tor
A brand name is a Magical racing although it differs. It is the same as that of a Speed pulse modulator.They are goods which there is also a compensation function of the
Speedometer, and the speed limiter of a FOR JAPAN MODEL can also cancel the Torque limiter in a low-speed GEAR, and can be satisfied very much.Although it stops being the mild characteristics of the
NORMAL, I think that it becomes easy to ride individually.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1
Negotiator-S Limiter-cut 09-YZF-R1 (RN24J) Although R1 of me was 12 model MODEL, it was able to respond. It can be used rightly. Explanation of wiring was also intelligible and explanation of 12 models was also indicated. Although i
Negotiator-S Limiter-cut 09-YZF-R1 (RN24J)
Although R1 of me was 12 model MODEL, it was able to respond.
It can be used rightly.
Explanation of
wiring was also intelligible and explanation of 12 models was also indicated.
Although it was an Image which seems to be difficult, it attached simply unexpectedly and has wired at the
beginning.
View detail
Fits: HONDA CBR600RR
He bought it in order to cut a Speed limiter with formation of a semi Full power. Compensation of speed and setting out of a Steering Damper can also be performed, and it is inexpensive.
He bought it in order to cut a Speed limiter with formation of a semi Full power.
Compensation of
speed and setting out of a Steering Damper can also be performed, and it is inexpensive.
View detail
Fits: YAMAHA XJR1300
[Web!ke Monitor] It purchased, although the 180-km/h speed limiter attached to 07 formulas of XJR1300 is canceled. Although a big-ticket place is a fly in the ointment compared with the Limiter cut for XJR1300 before 07 type, the Carbon Shell mad
[Web!ke Monitor] It purchased, although the 180-km/h speed limiter attached to 07 formulas of
XJR1300 is canceled.
Although a big-ticket place is a fly in the ointment compared with the Limiter cut for XJR1300 before
07 type, the Carbon Shell made from a Magical racing is used for a Case, and a Parenthesis is the best.
(^0^) V
-- if a Sprocket is changed, a speed display will be out of order again, but this can display an exact speed by inputting the folio number of the
Sprocket --
る -- it is likely to become like.
Although it is Limiter release of
main subject, it is good at a clear operation condition!
The usual run also has no problem.
View detail
Fits: HONDA CB1300 SF, HONDA CB1300 Super Four
There is the opportunity to run in a circuit and it is using it. Since sprockets are exchanged according to a course, compensation also of a meter display is possible for the limiter cut occasion, and I think that they are very wonderful goods. It
There is the opportunity to run in a circuit and it is using it.
Since sprockets are exchanged according to a course, compensation also of a meter display is possible for the limiter cut occasion, and I think that they are very wonderful goods.
It is easy, if it carries out while a set also looks at a description.
Although attachment was also performed by itself, I think that a tank can be floated or the direction which can remove sheathing etc. can be attached enough.
It is as better as something that it was and in addition, to consider a service manual.
View detail