Reviews
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
I think I'm feeling Torque up.
After the last replacement at 10,000Km, it was replaced for the second time at 20,000Km.
There were no glitches, and I feel like Torque has gone up in my mind.
View detail
OEM Replacement Type but ….
[How is it used?
Mainly commuting & Touring
Was the one you received as per Image?
As you can see in the image
Was the installation difficult?
It is not difficult but requires processing.
How was your experience with it?
Acceleration & fuel economy improvement almost as per Image.
Fuel consumption improved by about 1L/4km.
[Included Parts:were they on?
There were no Included Parts:other than as shown in the picture, and they were just in the product bag.
[Was there anything that disappointed you?
That XFORCE had a short plug cord and no precautions were taken prior to purchase.
Plug cord is being tied here and there with Band.
Point and hang of installation
Please disconnect the Minus terminal of the battery before proceeding. Also, depending on the motorcycle, it may be necessary to extend the plug cord for the shortage in advance.
[With or without Instruction Manual
None
[Easy to understand]
I think it can be installed with a little knowledge.
[Notes]
Depending on the motorcycle, an extension plug cord or plug cap may be required.
[ITEMS TO BUY TOGETHER
Depending on the motorcycle, an extension plug cord or plug cap may be required.
I personally have another Plug cap.
[Opinions and requests to Manufacturer
Can't you just pimp it to a Tie Band here and there or XFORCE? Can you do it? If it is not possible to attach the Tie Band to the XFORCE, I think you should make a clear announcement as a precaution, for example, to make the plug cord longer, or to prepare it by yourself.
If a purchaser who intends to have a motorcycle shop install the product, there is a possibility that the product cannot be installed even if the purchaser visits the motorcycle shop at a later date after the product has been shipped directly to the motorcycle shop.
【Review】
Although it was not possible to mount the unit on the floor, we modified it and installed it.
I think it is good to have a considered product that improves acceleration and fuel economy and also does not affect the OEM CPU.
View detail
Fits: DUCATI 900SS, DUCATI MONSTER900, DUCATI MONSTER400, DUCATI MONSTER600
I'm glad I bought the Uotani SP2Full powerKit.
For the past six months, misfires have been frequent and the condition has not been good. I have tried various things, such as polishing the ignition system harness contacts, changing connectors, and changing the handling, but there has been no improvement.
I looked for a NORMAL part at Webig, but it cost about 140,000 yen to replace it.
Yes, I have decided to go with Uotani. I chose Mr. Uotani. It's about half the price.
ChocolateChocolateFitting the fittings was a bit of a challenge, but Harness has made the connections for each car model, so it's very easy.
Experience the effects of running
Is good
The exhaust sound has been improved and the car is now more nimble.
So far, I have not noticed any dramatic improvement in fuel economy or acceleration, but the overall feeling of the motorcycle is very crisp.
View detail
Purchased for ignition inspection
It is very good to be able to see the ignition system of BigSingle even when starting KICK when checking the ignition system alone. View detail
Fits: GASGAS SM125, GASGAS SM250, KTM 250 Street Enduro, KTM 360 Enduro, GASGAS EC125, GASGAS EC200, GASGAS EC250, GASGAS EC300, GASGAS EC400FSE, KAWASAKI KX500, KTM 200 EXC, KTM 200 XC-W, KTM 200 Enduro, YAMAHA WR250Z, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250X, その他 TM250ED
it works.Never seen such a strong spark
I've run NGK in all of my bikes for years and never have had any issues and definitely get great performance. I won't run anything else in my bikes and have never experienced failure from them. If they are changed at their recommended interval or even a little early you'll be hard pressed to find anything better. Always be sure to set your gap for what your machine manufacturer recommends and you'll be in great shape.There are NGK fake spark plugs on the market. You need to be careful.Buy from Webike or distributors. View detail
Improved rev characteristics at high RPM
This is an imprementation used for KSR2 (B6).
The OEMCDI for KSR2 is built into the Ignition coil, so if you want to replace it, bothQuantity:The set is recommended. I had previously obtained a kit that came with this KSR1 Ignition coil, and I incorporated it at the same time as the SUS441 Reinforced Ignition Coil.
I fixed it to the space under the tank with the Tie Band along with the included Sponge, but I am a little concerned about whether or not it will have a vibration-induced trouble.
When actually driving the car, the Torque at low RPM is clearly lower, but the power output characteristics are more extended, making the driver want to use the higher RPM range more. It is like when I installed the HRCKit on my 4-stroke Racer replica in the 90's. It is not a drastic change, but it is a more aggressive and aggressive response. It is not a drastic change, but it is a more 2-stroke-like characteristic that can be enjoyed by the driver as it is more focused on the high rpm range.
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
Plug replacement
Regular Plug replacement for CRM. It is a little bit covered. View detail
Replacement from HondaOEM Product
HondaOEM Product has run 98,000 km. Gap was 0.8 to 0.9mm, so it could have gone 100,000 km, right?
Can this product also be used for 100,000 km?
I replaced it, but I can't tell the difference. If I had to guess, I would say that the dandruff is better.
View detail
Fits: HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
DAYTONAPower advance full digitalcdi and Uotani SP2 compatibility
In my case, the combination of the Utani SP2 and the OEM CDI was not good, and the high RPM was not extended at all compared to the OEMIgnition coil, with the unexpected result that the maximum speed was slower than the OEM.
We thought the cause was that the Ignition coil affected the ignition timing, so we purchased this DAYTONAPower advance full digitalCDI to correct the ignition timing.
As a result, mid- to low-speed acceleration is sharper and the rear tires get hotter under acceleration. The maximum speed is about the same as the OEM CDI.
View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
Plugs are also consumables.
Replaced from OEM Product (CPR7EA-9) with about 5000km since previous replacement.
I also took a look at the removed Plug and found that the burn was just right to slightly burnt, and that it was worn out. Do I need to change it yet?" So much so that.
My feeling is that the vibration from the Engine when running at a constant throttle has been reduced. I feel that the vibration from the Engine when running at a constant throttle has been reduced.
However, it is difficult to evaluate the replacement because it may have been replaced from a worn-out condition.
The price is about 1000 yen higher than OEM, but it is not that expensive, so if you are interested, you may put it on to see when it is time to replace it.
View detail
Fits: DERBI VIVO-75, HONDA Karen., HONDA Karen S., HONDA charette, HONDA Variety, HONDA runaway
I purchased this as a stockpiled Plug for my car.
for Vehicle (air-cooled Beetle 1977 GermanInjection) purchased and replaced as a Plug.
The conformity on the service manual can be found here. BP5HS But..
This time it was originally attached BPR6HSA was also purchased at the same time.
Plugs for air-cooled Beetle need to be investigated as the model varies depending on the year.
at present BPR6HSA I put on the one that is in good shape, BP5HS is for stockpiling.
Since it is always better to have an old car, both Motorcycle and car, the cosmetic NGKPlug is reliable.
I feel that the Plug cord should be replaced as well.
View detail
Purchased and replaced as a Plug for my car.
This time, I bought and replaced it as a Plug for my car (air-cooled Beetle), not for Motorcycle.
The conformity on the service manual is BP5HS (purchased at the same time this time)" But..
This one originally came with it. BPR6HSA purchased and replaced.
"R" The Noise system is not available for cars with an audio system because it is equipped with a
My car does not have an audio system, so I do not benefit from it.
Although replacing plugs is a simple Image, the air-cooled Beetle (German) with cooler has no Clearance in the Heater Hose and Compressor, making the replacement work difficult.
After the replacement, the engine started and of course blew up better.
For older cars, both motor cycles and cars, you should always have at least One set (for 4 cylinders) ready to change at any time.
NGKPlug is cosmetically good, so I bought other Plugs at the same time.
View detail
Fits: SUZUKI VECSTAR150, SUZUKI VL250, SUZUKI AVENIS125, APRILIA Pegaso650STRADA, APRILIA Pegaso650STRADATRAIL, HUSQVARNA TE610, YAMAHA Tricity155, YAMAHA BWS 50, YAMAHA MAJESTY125, YAMAHA VINO, YAMAHA BWS125Fi, YAMAHA JOG, YAMAHA DELUXE, YAMAHA NEWS GEAR, YAMAHA CYGNUS150 XCLC, YAMAHA GEAR, YAMAHA GRAND MAJESTY400, YAMAHA XT660X, YAMAHA VOX, YAMAHA XT660R
Plug replacement
Replaced the original old C7EPlug with no problems.
I'm not sure if it improves starting or fuel economy.
View detail
Fits: HONDA MONKEY125, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA glom, HONDA CROSS CUB 50, HONDA CROSSCUB110, HONDA WAVE125R, HONDA CZ-i110, HONDA WAVE125S, HONDA WAVE125i, HONDA ANF125innova
Since we're here, let's have a good Plug.
Plugs that had not been replaced for about 30,000 km after being driven in a new car.
I bought it with the intention of replacing it.
Compared to the quirky, worn and blacked out Plug.
Starting and Idling stability is excellent.
Some increase in fuel economy after replacement.
I am very happy to see Engine turn around so energetically.
I will purchase again when the next time comes for replacement.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Improved starting performance! Certainly works!
I repurchased the commuter issue because I switched from CUB110JA44 to JA59.
I had used a Plug of this series in my previous car and liked the improved starting performance and the acceleration feeling at the beginning of Axel opening.
So I decided to remove it from JA44 and reuse it in JA59, which I had switched to, but to my surprise, the designated Plug heat value was changed to 6→8 for JA59, which became a New ModelEngine!
I wonder if it is the effect of the higher compression ratio of the Engine?
Anyway, now I can no longer reuse it, so I bought another MotoDXPlug, number 8.
The installed impression is the same this time, with the first immediate impression being improved starting performance.
The image that used to be played with a "curl" sound is now played with a "curl" sound, and the increased pulse and torque feeling at the beginning of Axel opening is also unchanged.
We do not yet know how long this performance will last, but the manufacturer claims that the durability has been improved, so we are looking forward to the Large model.
View detail
Fits: HONDA MSX GROM, HONDA GROM, HONDA SUPER CUBC125, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA ADV160
just to be sure
I heard that the Coil of Grom JC92 is Smaller than the Coil of Grom JC92.
The OEM has no performance problems, but we replaced it.
Is there a change in your mind's eye? It's about the same.
Well, I have no problem with it because of the price and easy installation!
View detail
Fits: SUZUKI GSX450, KAWASAKI Z400LTD, KAWASAKI KH250, KAWASAKI Z250LTD, KAWASAKI Z250FT, SUZUKI GSX400E, SUZUKI GSX250E, SUZUKI GT750, SUZUKI GT550, SUZUKI GT380, SUZUKI GT250, SUZUKI GS400, SUZUKI GT125, YAMAHA XS750, YAMAHA XS650, YAMAHA XS400, YAMAHA XS250, YAMAHA GX400, YAMAHA GX250, HONDA CB350
Enhanced Ignition
Used for CB250. The installation pitch is the same, and it was possible to install without difficulty by bending the terminals.
The polarity is indicated at the base of the terminal, although the color of the Wiring is different.
Coupler, or simply throw away the entire Wiring and change it to a terminal.
As long as the points are properly adjusted, ignition timing adjusted, and condenser inspected,
Sparks are stronger and better.
I am looking forward to the durability of the rest.
View detail
I really only wanted Cap...
I replaced the SP Mukawa Hyper Ignition Coil with a red one, so I thought I would get a red NGK plug cap as well, but all the actual stores and EC sites were out of stock. I was about to give up when I found this plug cap with plug cord. I wanted only the cap, but the price was not much different from buying a black cap at a real store, taking into account the points, so I bought it. The code is assembled, but it is threaded like the factory one, so you can remove it by turning it. I replaced the coil, plugs, and air cleaner at the same time, so I don't know which effect it had, but I feel the response has improved. I wonder if this cap and cord set will be replaced with black caps when they run out of stock. View detail
Fits: HONDA Johno., HONDA Giorno/Sporto, HONDA Dio., HONDA diocesan, HONDA TODAY., HONDA Benry., HONDA Benly Pro
exchange of new products
It is time to replace it with a new one in accordance with the regular replacement.
The price is reasonable, which is helpful for consumables.
View detail