Reviews
Polisport Radiator Shroud Set for CR125R 2001
This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail
fast delivery, nice quality
It allows you to know the temperature of the engine oil indirectly There are variations in accuracy But it goes well with the bike and is pretty View detail
Just fit like OEM Product
I purchased again this time.
It is mechanical and looks great on the air-cooled CB1100. It is not accurate, but it allows you to check the degree of oil temperature rise and has the effect of preventing overheat in the summer,
View detail
Replacement from OEM Product
I replaced the OEMCap that was too assertive for my Black vehicle with this one. It is not a compatible car model, but … I was able to install it without any problems.
I haven't driven the car since it was installed, but I'm happy to say that it looks exactly how I expected it to look with the uniformity of the Black color.
View detail
Yoshimura Radiator Guard
As expected, Yoshimura and Suzuki are a perfect match.
I've wanted it for a long time, and I'm so glad I finally bought it.
The finish itself is very luxurious and sophisticated.
The price is quite expensive, but I think it is an item that makes the bike more stylish.
I recommend to anyone considering purchasing.
-------------------------------------------------- -------- As expected, Yoshimura and Suzuki are a perfect match. I've wanted it for a long time, and I'm so glad I finally bought it. The finish itself is very luxurious and sophisticated. The price is quite expensive, but I think it is an item that makes the bike more stylish. I recommend to anyone considering purchasing. Powered by Google Translator
View detail
Fits: YAMAHA MT3, YAMAHA MT-25, YAMAHA MT03
Just fit in the current model
It can be installed on the current model (RH21J) MT-03 without any problem.
As is the case with other people's Impression,
Many of the products made by other manufacturers have logos or company names with decorative etchings,
If you are not good at such things, or if you prefer simplicity, this Radiator guard is a recommendation.
The manufacturing process is very solid and simple, which gives the manufacturer a sense of confidence.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Eliminator400
Radiator for protection
The bare Radiator was installed for protection.
I chose that one because I wanted to unify the color with Black, but Large was the right choice.
The only thing left to do is to hope that the cooling performance will not drop.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
MORIWAKIBrand is still the best!
I have been using inexpensive foreign products, but the black painting was so crude that it rusted quickly. I don't think it will rust red because it is made of aluminum, but I will maintain it by taking care of corrosion peculiar to aluminum. View detail
I am satisfied with the product.
I am very happy with the price and the workmanship. View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Used for CB750rc42
I did some research and found out that this product for CBX400F fits CB750rc42, so I installed it immediately.
Simply remove the O-Ring on the original Oil Temperature Meter and install it.
It was Exactly
It's an air-cooled Engine, so it's a necessity to avoid Overheat in summer traffic jams and such!
The engine of rc42 was originally a CBX750F engine, so I removed the filler cap on the Left Side and put it on.
View detail
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
Radiator protection
I have been interested in these parts for a while, but the price was so high that I thought I could buy a RadiatorBody with a little more money…, then the price of OEM parts went up and the spring sale started, so I decided to buy them.
The installation method was to hook the claws of the Core guard onto the upper part of the RadiatorBody and fix the lower part between the attached Bracket.
I was worried that they might come off, but they seem to be quite precise and firmly fixed.
However, the bolt, washer, and nut included with the lower bracket are small, so those who are not good at detailed work may be frustrated. However, the Bolt, Washer, and Nut attached to the lower Bracket are small.
I dropped the Nut a few times, so I think it would be better to lay down Dustcloth, about the size of Matte or Bath towel, around the area before working on it to prevent it from rolling around and disappearing somewhere.
Until now, because the price of the core guard was close to that of the RadiatorBody in the case of the Black Type, I thought that I should change the Body if it was bent, but when a relatively large stone was hit by bad luck during a touring trip, the coolant water would leak and it would be impossible to run, so I changed my mind. However, I have changed my mind that it would be better to install it as a precautionary measure in case I fall.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
Genuine R&G Radiator Guard for Yamaha MT09 2019
This was a part I wanted to get for my wife's bike, the MT09 which did not have a guard on the radiator. I have used R&G many times before forjust this part as they are great. Finding the right one for this MT09 was not hard as I just checked R&G website and that gives you all the alternative for options on this bike. The guard from R&G was pretty good and was a little cheaper thn I could source locally. With a couple of other smaller parts already in my basket, I got them all shipped voa EMS together to save ona bit of shipping. EMS got my order to me in perfect condition on 5 days. The radiator gurad came in the R&G box andhad all the accessories I needed to fit to the bike. I have to say, a long time ago, I did have a radiator guard from R&G and the paint finish did not last too long but by the looks of this new one now, they have improved the paint finish tremendously. This has a nice shiny but kind of matt finish. The mesh in the grill is small enough to not let any big rocks or stones through ehich is great in my opinion. Yes, I could have got a different radiator gusrd from another brand but I do trust R&G nowadays. Fitted easily enough but take your time and you will be fine. The overall is excellent and really hides the radiator nicely. Very pleased and so if the wife. Thanks Webike. View detail
If you choose Simple, this is the one.
I was looking for something simple and simple from a proper manufacturer, but I didn't want something with a design such as a manufacturer's logo.
As expected
View detail
It looks cool
I just received my package. The quality looks superb. I havent used it yet but will install it soon. I have seen this brand used in Japan in a lot of Kawasaki's and everyone is happy. Thabk you very much for this high quality product View detail
To be called Mr. Yo Stainra ….
The GSX 1400's CoolerCore also has a fan, and is it water-cooled? It is as large as the area of the Small Type RadiatorCore, which is said to be water-cooled.
It's hard to write out the bugs that have gotten deep into the Core.
The very Core of oil cooling (nuclear) I personally wish there was a YOSHIMURAPunchingDesign in English Version.
Installation is easy. Remove the SIDEGuard with a hexagonal Lunch and pop it on.
Mine is Black and it changes the look all at once. It was quite nice.
View detail
It is a little hard, but it will turn to the end.
Many people say they can't make it to the end? But, we are excited to give it a shot! If you hold it down firmly and turn it firmly, it will tighten tightly with a high-precision feel. View detail
Fits: HONDA MONKEY, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund
Oil Temperature Meter for CROSS CUB
Simply remove the oil plug cum Level gauge and replace it with this product.
The temperature-sensing part does not directly enter the oil, but measures the temperature of the scattered oil that adheres to it.
It is not known if the temperature is reliably measured.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
Simple is fine.
The calm design has a great visual effect!
It is easy to install and I recommend it.
View detail
Mark that is not too assertive is a nice touch.
Although the installation requires a certain amount of skill, most of the front cowls are removed, so I purchased this product along with r's gear's Full Exhaust System replacement.
It is very well made as a core guard, and the points are well controlled, so it is a product that can be recommended to be installed from new cars.
GSX1300R HAYABUSAOwner… No, I think it is a must have product for all MotorcycleOwners!
In fact, the price is reasonable, but the installation WEBManual is very well written, and it was useful when removing and installing the Cowl when replacing the Full Exhaust System!
View detail